Search

Biodegradability is a crucial characteristic to improve the clinical potential of sol-gel-derived glass materials. To this end, a set of degradable organic/inorganic class II hybrids from a tetraethoxysilane(TEOS)-derived silica sol and oligovalent cross-linker oligomers containing oligo(d,l-lactide) domains was developed and characterized. A series of 18 oligomers (Mn: 1100-3200Da) with different degrees of ethoxylation and varying length of oligoester units was established and chemical composition was determined. Applicability of an established indirect rapid prototyping method enabled fabrication of a total of 85 different hybrid scaffold formulations from 3-isocyanatopropyltriethoxysilane-functionalized macromers. In vitro degradation was analyzed over 12months and a continuous linear weight loss (0.2-0.5wt%/d) combined with only moderate material swelling was detected which was controlled by oligo(lactide) content and matrix hydrophilicity. Compressive strength (2-30MPa) and compressive modulus (44-716MPa) were determined and total content, oligo(ethylene oxide) content, oligo(lactide) content and molecular weight of the oligomeric cross-linkers as well as material porosity were identified as the main factors determining hybrid mechanics. Cytocompatibility was assessed by cell culture experiments with human adipose tissue-derived stem cells (hASC). Cell migration into the entire scaffold pore network was indicated and continuous proliferation over 14days was found. ALP activity linearly increased over 2weeks indicating osteogenic differentiation. The presented glass-based hybrid concept with precisely adjustable material properties holds promise for regenerative purposes., Statement of Significance: Adaption of degradation kinetics toward physiological relevance is still an unmet challenge of (bio-)glass engineering. We therefore present a glass-derived hybrid material with adjustable degradation. A flexible design concept based on degradable multi-armed oligomers was combined with an established indirect rapid prototyping method to produce a systematic set of porous sol-gel-derived class II hybrid scaffolds. Mechanical properties in the range of cancellous bone were narrowly controlled by hybrid composition. The oligoester introduction resulted in significantly increased compressive moduli. Cytocompatible hybrids degraded in physiologically relevant time frames and a promising linear and controllable weight loss profile was found. To our knowledge, our degradation study represents the most extensive long-term investigation of sol-gel-derived class II hybrids. Due to the broad adjustability of material properties, our concept offers potential for engineering of biodegradable hybrid materials for versatile applications., (Copyright © 2017. Published by Elsevier Ltd.)

Nucleic acid-based therapeutics offer enormous potential in the treatment of various pathologies. For DNA or RNA delivery, nanoparticle systems based on lipids or polymers have been developed. However, colloidal instability in solution, poor storage properties especially as dry powder and little stability against an aggressive environment, e.g. after oral application, are major issues. Furthermore, there is an urgent need for sustained release systems that allow for fine-tuned, long-term temporal and spatial nanoparticle release. In this paper, we describe the embedding of polymeric nanoparticles for gene delivery, namely polyethylenimine (PEI)-based polyplexes and their corresponding liposome-modified analogues (lipopolyplexes), into microparticulate poly (vinyl alcohol) (PVA) hydrogels. Various parameters are modified, and major differences are found. PVA is explored with two different molecular weights and at different concentrations, furthermore different emulsifiers and acetone for extraction are employed, and the protocol is performed with or without repetitive freeze/thaw cycles for physical PVA crosslinking. We thereby establish Nanoparticles-in-Microparticle Delivery Systems (NiMDS) that are extensively characterized and shown to allow prolonged storage as easy-to-handle formulation (dry powder) without loss of nanoparticle activity. Unexpectedly, the nanoparticles' PVA encapsulation/release alters important physicochemical nanoparticle properties and biological activities in a favourable way. Furthermore, we also demonstrate the nanoparticle release to be dependent on the microstructure of the PVA matrix, which is determined by the degree of physical crosslinking through a defined number of freeze/thaw cycles. We show that these defined physically crosslinked PVA hydrogels thus represent sustained release devices for fine-tuned, long-term nanoparticle release in possible therapeutic applications., Statement of Significance: The present paper for the first time describes the embedding of polymeric PEI-based polyplexes and lipopolyplexes into poly(vinyl alcohol) (PVA) hydrogels, to establish novel Nanoparticles-in-Microparticle Delivery Systems (NiMDS). Through modification of various parameters including different PVA molecular weights and concentrations, different emulsifiers and defined numbers of freeze-thaw cycles for physical PVA crosslinking, sustained release devices are also obtained. Beyond favourable alterations of important physicochemical/biological nanoparticle properties and the possibility for prolonged storage as easy-to-handle formulation (dry powder), we show that these NiMDS also allow the tailormade, fine-tuned, long-term release of fully active nanoparticles in possible therapeutic applications., (Copyright © 2016 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

We present a series of organic/inorganic hybrid sol-gel derived glasses, made from a tetraethoxysilane-derived silica sol (100% SiO2) and oligovalent organic crosslinkers functionalized with 3-isocyanatopropyltriethoxysilane. The material was susceptible to heat sterilization. The hybrids were processed into pore-interconnected scaffolds by an indirect rapid prototyping method, described here for the first time for sol-gel glass materials. A large panel of polyethylene oxide-derived 2- to 4-armed crosslinkers of molecular weights ranging between 170 and 8000Da were incorporated and their effect on scaffold mechanical properties was investigated. By multiple linear regression, 'organic content' and the 'content of ethylene oxide units in the hybrid' were identified as the main factors that determined compressive strength and modulus, respectively. In general, 3- and 4-armed crosslinkers performed better than linear molecules. Compression tests and cell culture experiments with osteoblast-like SaOS-2 cells showed that macroporous scaffolds can be produced with compressive strengths of up to 33±2MPa and with a pore structure that allows cells to grow deep into the scaffolds and form mineral deposits. Compressive moduli between 27±7MPa and 568±98MPa were obtained depending on the hybrid composition and problems associated with the inherent brittleness of sol-gel glass materials could be overcome. SaOS-2 cells showed cytocompatibility on hybrid glass scaffolds and mineral accumulation started as early as day 7. On day 14, we also found mineral accumulation on control hybrid glass scaffolds without cells, indicating a positive effect of the hybrid glass on mineral accumulation., Statement of Significance: We produced a hybrid sol-gel glass material with significantly improved mechanical properties towards an application in bone regeneration and processed the material into macroporous scaffolds of controlled architecture by indirect rapid prototyping. We were able to produce macroporous materials of relevant porosity and pore size with compressive moduli, covering the range reported for cancellous bone while an even higher compressive strength was maintained. By multiple linear regression, we identified crosslinker parameters, namely organic content and the content of ethylene oxide units in the hybrids that predominantly determined the mechanics of the hybrid materials. The scaffolds proved to be cytocompatible and induced mineralization in SaOS-2 cells. This provides new insight on the critical parameters for the design of the organic components of covalent hybrid sol-gel glasses., (Copyright © 2016 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)