Search

The circadian clock influences a wide range of biological process and controls numerous aspects of physiology to adapt to the daily environmental changes caused by Earth's rotation. The kidney clock plays an important role in maintaining tubular function, but its effect on podocytes remains unclear. Here, we found that podocytes expressed CLOCK proteins, and that 2666 glomerular gene transcripts (13.4%), including autophagy related genes, had 24-hour circadian rhythms. Deletion of Clock in podocytes resulted in 1666 gene transcripts with the loss of circadian rhythm including autophagy genes. Podocyte-specific Clock knockout mice at age three and eight months showed deficient autophagy, loss of podocytes and increased albuminuria. Chromatin immunoprecipitation (ChIP) sequence analysis indicated autophagy related genes were targets of CLOCK in podocytes. ChIP-PCR further confirmed Clock binding to the promoter regions of Becn1 and Atg12, two autophagy related genes. Furthermore, the association of CLOCK regulated autophagy with chronic sleep fragmentation and diabetic kidney disease was analyzed. Chronic sleep fragmentation resulted in the loss of glomerular Clock rhythm, inhibition of podocyte autophagy, and proteinuria. Rhythmic oscillations of Clock also disappeared in high glucose treated podocytes and in glomeruli from diabetic mice. Finally, circadian differences in podocyte autophagy were also abolished in diabetic mice. Deletion Clock in podocytes aggravated podocyte injury and proteinuria in diabetic mice. Thus, our findings demonstrate that clock-dependent regulation of autophagy may be essential for podocyte survival. Hence. loss of circadian controlled autophagy may play an important role in podocyte injury and proteinuria., (Copyright © 2024 International Society of Nephrology. Published by Elsevier Inc. All rights reserved.)

As one of the most important transportation hubs and industrial bases in China, Zhengzhou has suffered from serious PM 2.5 pollution for a long time. However, the investigation of contamination status and possible exposure risks of environmentally persistent free radicals (EPFRs) in PM 2.5 from Zhengzhou is rare. In this work, a comprehensive study of pollution levels, seasonal variations, sources, and potential health risks of PM 2.5 -bound EPFRs in Zhengzhou was conducted for the first time. The atmospheric concentrations of EPFRs in PM 2.5 from Zhengzhou ranged from 1.732 × 10 12 spin m -3 to 7.182 × 10 14 spin m -3 between 2019 and 2020. Relatively serious contamination was noticed in winter and spring. Primary fossil fuel combustion and Fe-mediated secondary formation were apportioned as possible sources of PM 2.5 -bound EPFRs in Zhengzhou. Moreover, to avert the bias of the toxicity assessment induced by utilization of incompletely extracted EPFRs from sample filter, simulatively generated EPFRs were applied to toxicological evaluations (cell viability and reactive oxygen species assays). Corresponding experimental dosages were based on the estimated adults' annual exposure amounts of EPFRs in real PM 2.5 samples. The results elucidated that EPFRs might cause growth inhibition and oxidative stress of human lung cells, suggesting the possible exposure-induced health concerns for local people in Zhengzhou. This study provides practical information of real contamination status of PM 2.5 -bound EPFRs in Zhengzhou, which is favorable to local air pollution control and reduction of exposure risks on public health in central China., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Authors. Published by Elsevier Inc. All rights reserved.)

A high-performance piezoelectric photocatalyst (V-BiOIO 3 /FTCN) was constructed to improve removal efficiency of tetracycline hydrochloride (TCH). The role of V-BiOIO 3 in the composite was to introduce piezoelectric effect and construct S-scheme heterojunction photocatalyst with fish scale tubular carbon nitride (FTCN). The morphology, structure, chemical composition and optoelectronic characteristics of the as-prepared photocatalysts were studied by SEM, TEM, XRD, XPS and UV-Vis DRS. Combined with UV-Vis DRS, XPS valence band, Mott-schottky curve and theoretical calculations, the mechanism of TCH degradation was deeply analyzed. A series of degradation experiments showed that the V-BiOIO 3 /FTCN could effectively degrade TCH, and the removal efficiency was further improved under the action of ultrasound. Importantly, the further immobilized V-BiOIO 3 /FTCN/MS could float on the water surface to degrade TCH without additional stirring, which facilitated the recovery of photocatalysts and showed excellent practical application value. This work provided a reference for the design and immobilization of carbon nitride-based piezoelectric photocatalysts., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier B.V. All rights reserved.)

Removal of harmful organic matters from environment has great environmental significance. Carbon nanotube (CNT) materials and their composites have been demonstrated to possess excellent catalytic activity towards persulfate (PS) activation for the degradation of organic contaminants. Herein, detailed information concerning the function, modification methods and relevant mechanisms of CNT in persulfate-based advanced oxidation processes (PS-AOPs) for organic pollutant elimination has been reviewed. The activation mechanism of PS by CNT might include radical and nonradical pathways and their synergistic effects. The common strategies to improve the stability and catalytic capability of CNT-based materials have also been put forward. Furthermore, their practical application potential compared with other catalysts has been described. Finally, the challenges faced by CNT in practical application are clearly highlighted. This review should be of value in promoting the research of PS activation by CNT-based materials for degradation of organic pollutants and the corresponding practical applications., (Copyright © 2022 Elsevier B.V. All rights reserved.)

Morphology adjustment is a feasible method to change the physicochemical properties of photocatalysts. The issue that excessively thick tube wall of tubular g-C 3 N 4 is not conducive to the electron migration from inside to the surface thus inhibiting the separation of photogenerated carriers has always been ignored. Potassium ions were used to regulate the structure of the tubular supramolecular precursor by breaking hydrogen bonds, thereby promoting the synthesis of delaminated laminar tubular g-C 3 N 4 (K-CN), which not only shortened the transfer distance of photogenerated electrons but also provided abundant reaction active sites. Experiments and DFT calculations were combined to reveal the details of the physicochemical properties of K-CN. The photocatalytic capacity of K-CN for tetracycline hydrochloride (TCH) degradation and H 2 O 2 generation were 83% and 133 μM, respectively. This work not only synthesized a novel delaminated tubular g-C 3 N 4 but also provided a strategy and inspiration for structure and performance optimization for tubular g-C 3 N 4 ., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Due to the low efficiency of single-component nano materials, there are more and more studies on high-efficiency composites. As zero dimensional (0D) non-metallic semiconductor material, the emergence of graphene quantum dots (GQDs) overcomes the shortcomings of traditional photocatalysts (rapid rate of electron-hole recombination and narrow range of optical response). Their uniqueness is that they can combine the advantages of quantum dots (rich functional groups at edge) and sp 2 carbon materials (large specific surface area). The inherent inert carbon stabilizes chemical and physical properties, and brings new breakthroughs to the development of benchmark photocatalysts. The photocatalytic efficiency of GQDs composite with semiconductor materials (SCs) can be improved by the following three points: (1) accelerating charge transfer, (2) extending light absorption range, (3) increasing active sites. The methods of preparation (bottom-up and top-down), types of heterojunctions, mechanisms of photocatalysis, and applications of GQDs/SCs (wastewater treatment, energy storage, gas sensing, UV detection, antibiosis and biomedicine) are comprehensively discussed. And it is hoped that this review can provide some guidance for the future research on of GQDs/SCs on photocatalysis., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Recently, persulfate-based advanced oxidation processes (persulfate-AOPs) are booming rapidly due to their promising potential in treating refractory contaminants. As a type of popular two-dimensional material, layered double hydroxides (LDHs) are widely used in energy conversion, medicine, environment remediation and other fields for the advantages of high specific surface area (SSA), good tunability, biocompatibility and facile fabrication. These excellent physicochemical characteristics may enable LDH-based materials to be promising catalysts in persulfate-AOPs. In this work, we make a summary of LDHs and their composites in persulfate-AOPs from different aspects. Firstly, we introduce different structure and important properties of LDH-based materials briefly. Secondly, various LDH-based materials are classified according to the type of foreign materials (metal or carbonaceous materials, mainly). Latterly, we discuss the mechanisms of persulfate activation (including radical pathway and nonradical pathway) by these catalysts in detail, which involve (i) bimetallic synergism for radical generation, (ii) the role of carbonaceous materials in radical generation, (iii) singlet oxygen ( 1 O 2 ) production and several special nonradical mechanisms. In addition, the catalytic performance of LDH-based catalysts for contaminants are also summarized. Finally, challenges and future prospects of LDH-based composites in environmental remediation are proposed. We expect this review could bring new insights for the development of LDH-based catalyst and exploration of reaction mechanism., (Copyright © 2021 Elsevier B.V. All rights reserved.)

A highly reactive hollow tubular g-C 3 N 4 isotype heterojunction (SCN-CN) was designed to enhance visible light absorption and manipulate the directed transfer of electrons and holes. The results of UV-vis DRS, XPS valence band and DFT theoretical calculations indicated S doping increases the visible-light absorption capacity and changed the ba nd gap structure of g-C 3 N 4 (CN), resulting in the transfer of electrons from the CN to the SCN and holes from the SCN to the CN under visible light. In addition, the tubular structure of the SCN-CN facilitated the transfer of electrons in the longitudinal direction, which reduced charge carrier recombination. Furthermore, the optical properties, electronic structure, and electron transfer of SCN-CN were also studied by experiments and theoretical calculations. The antibiotic tetracycline hydrochloride (TCH) and dye Rhodamine B (RHB) were subjected to evaluate the photocatalytic performance of SCN-CN. The scavenger tests and ESR data showed that the h + , ·O 2 - and ·OH worked together in the photocatalytic process. Moreover, the photocatalytic degradation pathway was analyzed by LC-MS. This study synthesized a hollow tubular CN isotype heterojunction with high visible-light photocatalytic performance and provided a theoretical basis for CN isotype heterojunction., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Recently, a large quantity of carbon nanotubes (CNTs) enters the environment due to the increasing production and applications. More and more researches are focused on the fate and possible ecological risks of CNTs. Some literatures summarized the effects of CNTs on the chemical behavior and fate of pollutants. However, little reviewed the effects of CNTs on the biodegradation of pollutants. In general, the effects of CNTs on the biodegradation of pollutants and the related mechanisms were summarized in this review. CNTs have positive or negative effects on the biodegradation of contaminants by affecting the functional microorganisms, enzymes and the bioavailability of pollutants. CNTs may affect the microbial growth, activity, biomass, community composition, diversity and the activity of enzymes. The decrease of the bioavailability of pollutants due to the sorption on CNTs also causes the reduction of the biodegradation of contaminants. In addition, the roles of CNTs are controlled by multiple mechanisms, which are divided into three aspects i.e., properties of CNTs, environment condition, and microorganisms themself. The better understanding of the fate of CNTs and their impacts on the biochemical process in the environment is conducive to determine the release of CNTs into the environment., (Copyright © 2019 Elsevier Inc. All rights reserved.)

Particles with a diameter of <2.5 μm (PM 2.5 ) have serious adverse-effects on human health, which have caused widespread public concern in recent decades. Currently, most of the existing research on PM 2.5 have used linear regression analysis; very few studies on the subject have been conducted using non-linear models. This study adopts a panel threshold model, which is seldom used in environmental studies, to examine the non-linear effects of environmental regulation and economic growth on PM 2.5 in 30 OECD countries, and we also explore the key driving socio-economic factors for PM 2.5 emissions. The results of our analysis show that, along with an increase in environmental policy stringency, PM 2.5 emissions first rise and then show no significant correlations, and thus a reduction in emissions can be expected if current trends continue. As for GDP per capita, significant and negative correlations are found across the three phases divided by the panel threshold model, indicating a promoting effect for PM 2.5 mitigation. In addition, public expenditure on the air sector correlated positively with PM 2.5 concentrations, expanding the share of service economy reward to reduce air pollution, and urban population ratio exhibits an inverted U-shaped pattern. Future studies may shed more light on the regulation-PM 2.5 nexus, and more studies are needed to confirm the existence of bi-directional correlations between economic development and air pollution., (Copyright © 2018 Elsevier B.V. All rights reserved.)