Search

This study investigated the effect of different hydrocolloids on the improvement of the printability and post-processing stability of minced chicken meat, each hydrocolloid was prepared with 1 % formulation and compared with the control. The effects of these hydrocolloids on the rheological properties of chicken mince and complex model printing capability were explored separately, while the cooking loss and microstructure changes of the samples before and after heating were analyzed. The results showed that the chicken mince gel containing carrageenan was more suitable for printing, increased the yield stress and apparent viscosity of the samples, and the printing process was easier to mold. In addition, carrageenan increased the hardness of the samples, and the microstructures were compact and changed little during the heating process, and the water was locked in the gel matrix, reducing shape changes during the heating process. The use of hydrocolloids improves the stability of post-processing of chicken 3D printing., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The impact of various field strength (2, 3, 4 kV/cm) and treatment time (60s and 90s) combinations on NaCl content and diffusion coefficient of beef were evaluated in the current study. Weight change, water content, water holding capacity, and texture of beef after brining were also explored. The results demonstrated pulsed electric field (PEF) pre-treatment significantly increased NaCl uptake when the brining time was 150 min (P < 0.05). The maximum NaCl content increased by 19.50% and the diffusion coefficient increased by 58.50%. Relatively mild PEF (60s) could improve beef qualities, but longer treatment time (90s) was detrimental to these qualities. Meanwhile, more complete myofibrillar structure and lower lipid oxidation extent were observed in the samples treated by PEF, contributing to the higher a* values. In conclusion, short processing time (60s) and high field strength (4 kV/cm) treatment is a potential strategy for meat brining acceleration and quality improvement in practical industrial production., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

This study investigated the effect of high-pressure processing (HPP) at 100 to 400 MPa for 2 min on the stability of reduced-fat reduced-salt (RFRS) meat batter. Total expressible fluid (TEF) of RFRS batter reached its minimum value at 200 MPa. The results of Raman spectra revealed that α-helix reached its random coils increased as the pressure level was increased, and pressure up to 200 MPa remarkably increased protein unfolding but 400 MPa increased aggregation. Finally, Raman spectra and magnetic resonance imaging (MRI) revealed that 200 MPa significantly increased tryptophan, tyrosine doublet, CH 3 and/or CH stretching and proton intensities related to water and fats; but decreased β structures, SS stretching (475) and (g-g-t or t-g-t, 540), as compared with the control. RFRS batter treated at 200 MPa is beneficial for the meat industry from the technological point of view and for consumers from the health point of view, as the improved emulsion stability contributed by the modified secondary and tertiary structures., (Copyright © 2021. Published by Elsevier Ltd.)

Development of healthier meat products is needed to meet consumers' request. The effects of dietary fiber addition on the water distribution, water binding capacity (WBC), and textural properties of a fat-reduced model meat system enriched with inulin, cellulose, carboxymethyl cellulose (CMC), chitosan, pectin, respectively, were investigated in this study. The fibers were incorporated in powder form to constitute 2% (w/w) of the meat batter. In general, fiber enrichment resulted in significant lower cooking loss and improved WBC, while the impact on texture was dependent on the specific dietary fiber. Low-field NMR relaxometry revealed that chitosan impacted the heating-induced changes in water distribution differently from other fibers and that CMC had a higher capability to counteract the impact of heat-induced protein denaturation on water expulsion than the other fiber types. It is anticipated that this knowledge is useful in the development of novel strategies where dietary fiber enrichment is optimized to promote specific and desired technological attributes of healthy meat products., (Copyright © 2017 Elsevier Ltd. All rights reserved.)

The selection of broilers for augmented growth rate and breast has brought about wooden-breast (WB) muscle abnormalities, which caused substantial economic losses. The objective of this study was to compare water holding capacity, water mobility and distribution, salt-soluble protein (SSP) content, and protein profiles of normal and WB chicken meat with different additions of NaCl. Thirty WB and 30 normal chicken breasts were selected from a deboning line of a major Chinese processing plant at 2 to 3 h post mortem. Two different meat batters were formulated to 150 mg/g meat protein and different NaCl contents (0%, 1%, 2%, 3%, and 4%). Results indicated that as NaCl contents increased, the cooking loss of meat batters decreased (P < 0.05). Increasing the NaCl content to 3% or more increased the solubility of myofibrillar protein and the extraction of SSPs, which resulted in the improving of cooking yield. Over a range of salt concentrations, normal and WB meat showed different protein profiles, with myosin heavy chain exhibiting a higher intensity at ≥3% salt level. Low-field nuclear magnetic resonance (LF-NMR)revealed an increased T22 and higher P22 in raw WB meat compared to normal meat (P < 0.05). Regarding the meat batters, WB meat batters had reduced T21 and lower immobilized water proportions at low NaCl contents (<2%). After heating, T2 shifted towards higher relaxation times with increasing NaCl contents in meat gels. Meat gels prepared from WB had a lower proportion of water within the myofibrillar protein matrix and a greater proportion of exuded bulk water at NaCl contents <3% (P < 0.05), while at higher NaCl contents the difference was eliminated, thus improving water retention capacity. In conclusion, for raw meat, meat batters and gels, water distribution and mobility of WB exhibited significant differences compared to normal meat. The addition of NaCl affected water mobility and distributions in meat batters, with a level of 3% NaCl eliminating the differences between processed normal and WB meat products., (© 2017 Poultry Science Association Inc.)

This study investigated the role of high-pressure processing (HPP) for improving the functional properties of meat batters and the textural properties of reduced-fat sausages. Application of 200MPa pressure at 10°C for 2min to pork batters containing various fat contents (0-30%) affected their rheological properties, cooking losses, color, textual properties and their protein imaging. The results revealed that both application of 200MPa and increasing fat content decreased cooking loss, as well as improved the textural and rheological properties. Cooking losses, texture and sensory evaluation of 200MPa treated sausages having 20% fat were similar to those of the 0.1MPa treated sausages having 30% fat. Principal component analysis revealed that certain quality attributes were affected differently by the levels of fat addition and by HPP. These findings indicated the potential of HPP for improving yield and texture of emulsion-type sausages having reduced fat contents., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

The purpose of this study was to evaluate the effects of sugarcane dietary fiber (SDF) and pre-emulsified sesame oil for pork fat replacement on batter characteristics. Replacing pork fat with SDF and pre-emulsified sesame oil significantly affected color, water- and fat-binding properties, texture, dynamic rheology, microstructure and sensory analysis. With SDF and pre-emulsified sesame oil, the batters had improved textures and gave good sensory scores. These batters containing SDF had reduced the cholesterol and fat contents. With increasing levels of SDF, the batters had higher water- and fat-binding properties, improved texture (hardness, gumminess and chewiness), dynamic rheology and a more balanced nutritional composition. However, when the level of SDF reached 3%, the pores formed by SDF in batter were too large to hinder aggregation and the hardness of batter was unacceptable, which result the allover acceptability to be unsatisfactory. The sample 2% SDF had comparable overall acceptability to the control batter., (Copyright © 2015. Published by Elsevier Ltd.)

High pressure processing (HPP) was used to explore novel methods for modifying the textural properties of pork sausages with reduced-salt, reduced-fat and no fat replacement additions. A 2×7 factorial design was set up, incorporating two pressure levels (0.1 or 200 MPa) and seven fat levels (0, 5, 10, 15, 20, 25 and 30%). Sausages treated at 200 MPa exhibited improved tenderness at all fat levels compared with 0.1 MPa treated samples, and the shear force of sausages treated at 200 MPa with 15 or 20% fat content was similar to the 0.1 MPa treated sausages with 30% fat. HPP significantly changed the P₂ peak ratio of the four water components in raw sausages, resulting in improved textural properties of emulsion-type sausages with reduced-fat and reduced-salt. Significant correlations were found between pH, color, shear force and water proportions. The scanning and transmission micrographs revealed the formation of smaller fat globules and an improved network structure in the pressure treated sausages. In conclusion, there is potential to manufacture sausages with reduced-fat and reduced-salt by using HPP to maintain textural qualities., (Copyright © 2014. Published by Elsevier Ltd.)