Search

Using Shimadzu AGS-100KN universal tensile testing machine, tensile tests were conducted on copper containing antibacterial stainless steel at 25 °C, −20 °C, −60 °C, −100 °C, and −140 °C. The fracture morphology and microstructure evolution of the material were then analyzed using various techniques including scanning electron microscopy (SEM), electron backscatter diffraction (EBSD), X-ray diffraction (XRD), and transmission electron microscopy (TEM) techniques. The experimental findings showed that with the decrease of deformation temperature, the ultimate tensile strength(UTS) increased by about 49.7 %, the yield strength (YS) increased by about 35.5 %, and the elongation(EI) decreased by about 27.3 %, showed obvious low temperature strengthening effect. The High-angle grain boundaries (HAGBs) increased with decreasing temperature, while low-angle grain boundaries (LAGBs) decreased. The plasticity gradually decreased and the strength gradually increased, resulting in an increase in its ability to resist deformation. The number of precipitated phases gradually increased, and the size also gradually becomes larger, and the interaction between the diffusely distributed precipitated phases and dislocations led to precipitation strengthening. With the decrease of temperature, the stacking fault energy gradually decreased, the SFE was 21.26 mJ/m2 at the temperature of −140 °C. The main plastic deformation mechanism of copper-containing austenitic stainless steel in the low-temperature tensile process was transformed from deformation twins to strain-induced martensitic phase transformation.

Limu smoked chicken is a traditional Chinese delicacy; however, polycyclic aromatic hydrocarbons (PAHs) are generated during the smoking process. We developed a pyrolysis process for pear wood liquid smoke with minimal PAH generation. Pear wood liquid smoke products were prepared under different pyrolysis conditions in a self-made pyrolysis reactor, and the total phenol, carbonyl compound, total acid, and PAH contents and PAH toxicity risk were evaluated. With increasing temperatures, the toxicity equivalent ΣPAH of the smoke liquid reached 3.004 μg/kg. With increasing particle sizes, the total phenol content reached 1.6 mg/mL; the phenol content was 5.95 mg/mL. With increasing particle sizes, the toxicity equivalent ΣPAHs of the smoke liquor reached 2.441 μg/kg. The optimal parameters for treating pear wood smoke liquid in the thermal reaction device were a pyrolysis temperature of pear wood of >350 °C, particle size of S2, and sucrose content of 8%.

In this study, 304 antimicrobial stainless steel coatings were prepared by the electron beam melting of antimicrobial stainless steel powder, in an attempt to enhance the surface properties of Q345R steel. Besides, the effect of Cu-containing 304 powder coatings on the microstructure, mechanical properties, and electrochemical properties of the Q345R surface was investigated. The results indicated that the coating grain was refined, the dislocation density was increased, and both the plasticity and toughness were enhanced after the electron beam surface coating (EBSC) treatment. Additionally, the hardness of coatings was also enhanced under the three beam currents due to grain refinement and dislocation strengthening. At a beam current of 28 mA, the coating hardness reached a maximum of 384.078 HV, representing a two-fold increase compared with the base material (BM) hardness of 131.048 HV. Moreover, the abrasion resistance of the coating was superior to that of the BM. At a beam current of 28 mA, the wear volume and wear rate were minimized to only 10 % of the wear volume of substrates. In galvanic corrosion measurements, the coatings displayed better corrosion resistance than the substrates, and these samples at a beam current of 28 mA exhibited the best corrosion resistance. Overall, the E-beam surface melting 304 stainless steel coating can effectively improve the properties of Q345R carbon steel.

This study conducted isothermal hot compression experiments on Incoloy825 superalloy, spanning temperatures from 1000 to 1150 °C, strain rates from 0.01 to 10 s−1, and a true strain of 0.69. Employing Electron Backscatter Diffraction and Transmission Electron Microscopy for characterization, the research systematically explored the alloy's thermal-mechanical behavior, hot processing maps, microstructural evolution, and dynamic recrystallization (DRX) mechanisms during hot deformation. True stress-strain curves were obtained for various deformation conditions, corrected, and used to establish a highly precise constitutive model. A hot processing map was constructed using the Dislocation Migration Model theory. Through comparative analysis with microstructures, it identified the optimal hot processing parameters for Incoloy825 superalloy within the range of 1110–1150 °C, 0.01–0.3 s−1, and 3.3–10 s−1. Microstructural analysis revealed a positive correlation between temperature and the extent of DRX in the alloy, with an acceleration in the transformation from Low-Angle Grain Boundaries (LAGB) to High-Angle Grain Boundaries (HAGB). The temperature of 1100 °C served as a critical point for the influence of strain rate on the microstructure. Below this temperature, DRX and HAGB proportions initially decreased and then increased with higher strain rates, while at higher temperatures, they directly correlated with strain rates. The study also investigated DRX mechanisms, determining Dynamic Discontinuous Recrystallization (DDRX) as the primary mechanism, more active at higher temperatures and strain rates. Continuous Dynamic Recrystallization (CDRX) served as a supplementary mechanism, especially in high-temperature and low-strain-rate deformation. Twins acted as favorable nucleation sites for DRX, facilitating both DDRX and Twin-DRX (TDRX) processes in Incoloy825 superalloy.

Blastocystis is a parasitic protist that can infect humans and various domestic and wild animals. However, there is limited research on the prevalence of this parasite among rodents, particularly those living in pig farm settings. Therefore, to investigate the occurrence, molecular characterization, and zoonotic potential of Blastocystis among rodents within pig farm environments, we conducted an investigation of 227 rodents and shrews from 34 pig farms located in Henan, Shaanxi, and Shanxi provinces of China using nested PCR of the SSU rRNA gene of Blastocystis. The potential transmission and public health implications were also assessed from a One Health perspective. Blastocystis was detected in 86 (37.9%) fecal samples. The highest infection rate was observed among Ruttus norvegicus (73.7%, 42/58), followed by Ruttus tanezumi (30.1%, 41/136), and Mus musculus (12.0%, 3/25). However, it was not detected among individuals with Apodemus agrarius (n = 1) and Crocidura shantungensis (n = 7). Five known zoonotic Blastocystis subtypes (ST1–ST5) were identified, with ST4 (51.2%, 44/86) and ST5 (40.7%, 35/86) being the predominant ones, followed by ST1 (3.5%, 3/86), ST3 (3.5%, 3/86), and ST2 (1.2%, 1/86). ST4 was prevalent among R. norvegicus (83.3%, 35/42), while ST5 dominated R. tanezumi (70.7%, 29/41). Furthermore, ST5 exhibited the widest distribution at pig farm level, accounting for 65.0% (13/20) of Blastocystis-positive pig farms. This investigation presents the first documented Blastocystis infection in R. tanezumi and M. musculus, highlighting the predominant presence of the zoonotic ST5 subtype in rodents for the first time. The results demonstrate that sympatric rodents can serve as natural reservoirs for Blastocystis and play a role in its transmission. These findings provide information on the dynamics of rodent transmission and emphasize the potential public health threat posed by zoonotic Blastocystis subtypes spillover from pig farms.

In total knee arthroplasty (TKA), the mechanical mismatch between cobalt-chromium (CoCr) alloy tibial implant and bone has been implicated in stress shielding and subsequent implant failure and bone resorption. This study investigates the biomechanical advantages of poly-ether-ether-ketone (PEEK) tibial implant, which exhibit properties analogous to those of the surrounding bone. A finite element analysis (FEA) was employed to assess and compare the biomechanical performances of PEEK and CoCr tibial implants in patients with and without osteoporosis. Four FEA models were constructed with PEEK and CoCr alloy implants in normal and osteoporotic tibias. Based on previous literature and our clinical experience, stresses measurements were taken at 16 points on the tibial plateau and 8 points on the two surfaces which were 10 mm and 20 mm apart from the tibial plateau, with specific regions quantified for stress shielding. The results showed significant differences in stress distribution between PEEK and CoCr implants. The PEEK implants exhibited higher equivalent stresses on the tibial plateau in all models (normal bone: 0.22 ± 0.07 MPa vs. 0.13 ± 0.06 MPa, p

Objective: To comprehensively evaluate the effectiveness and safety of lorecivivint inhibitors in the treatment of osteoarthritis through meta-analysis. Methods: A comprehensive literature search on lorecivivint inhibitors in osteoarthritis was performed using electronic databases such as PubMed, Embase, Web of Science, and CochraneLibrary up to July 30, 2022. Two reviewers independently screened, evaluated, and reviewed the eligible studies. Data analysis and processing were carried out using RevMan 5.4 software. Results: A total of six studies involving 3056 participants were included. Meta-analysis showed that compared with the control group, lorecivivint significantly increased WOMAC discomfort (0.03 mg Week 12) (MD = −0.21, 95% CI [-1.94 – 1.53]; P = 0.81), WOMAC function (0.07 mg Week 24) (MD = −1.81, 95% CI [-4.74 – 1.12]; P = 0.23) and Joint space width (0.23 mg Week 24) (MD = −1.16, 95% CI [-3.69 – 1.38]; P = 0.37). Conclusion: A new treatment method combining Wnt pathway modulators with intra-articular CLK2/DYRK1A inhibitors could be a promising therapy for treating osteoarthritis. Lorecivivint was found to significantly improve WOMAC discomfort, WOMAC function, and joint space width in osteoarthritis patients. It is anticipated to be a reliable, safe, and effective treatment option for osteoarthritis with significant therapeutic utility and potential applications.

The hot deformation behavior of nickel-base superalloy at different temperatures (950–1150 °C) and strain rates (0.01–10 s−1) was investigated by using Gleeble-3800 thermal simulation machine. And the strain compensation Arrhenius model was established according to the obtained stress and strain with the calculated values of the correlation coefficient and the average absolute relative error of 0.986 and 7.17953%, respectively. Meanwhile, the recrystallization fraction model was also established. EBSD was utilized to characterize the microstructure of the experimental materials, and it is found that with the increase of deformation temperature, the recrystallization fraction shows a gradual increasing trend, and the grain grows gradually, while with the increase of strain rate, the recrystallization fraction first decreases and then increases. In addition, the recrystallization mechanism of the test materials is dominated by discontinuous dynamic recrystallization and supplemented by continuous dynamic recrystallization. Recrystallization is initially formed at the original grain boundary, and then gradually develop from the grain boundary to the interior of the grain. The twins inside the grain hinder the dislocation movement, which is conducive to DRX nucleation at the twin boundary. As the recrystallization fraction increases, Σ3 twin boundary fraction increases first and then decreases, and the reason for this change is further discussed.

In this study, the first evaluated and analyzed the local strain evolution and macro fracture morphology of AZ31/6061 explosive composite plate during uniaxial tension by the digital image correlation (DIC) method. The materials used are double-layer AZ31/6061 composite plates prepared by the explosive welding process. In order to meet the subsequent forming requirements, annealing at different temperatures is carried out. The fracture damage mechanism of AZ31/6061 explosive clad plate was comprehensively studied through mechanical tests at different annealing temperatures, microstructure characterization and fracture behavior analysis during the tensile process. The results showed that the thickness of the intermetallic compound at the interface increased with the increase of temperature, and the interface bonding strength reached the highest at 150 °C. Under the condition of 200 °C/2 h annealing, the composite plate has the best comprehensive properties, the tensile strength is 253.51 MPa, and the failure elongation is 25.16%. Combined with the SEM observation of tensile fracture and the evolution of strain distribution measured by digital image correlation (DIC), it is shown that the composite plate is mainly a brittle fracture mechanism before annealing and a ductile-brittle mixed fracture mechanism after annealing. Revealed the effect of temperature on the interfacial strengthening mechanism and fracture behavior of Mg/Al composite plate during fracture.

Cement can be reinforced with cancellous screws for repairing tibial defect in total knee arthroplasty (TKA). However, it is still unknown which size (diameter, length) of screws is better, and the purpose of this study was to perform a finite element analysis (FEA) to determine it. Twelve FEA models were set to represent the cement-screw technique with different diameters (3.5 mm, 5 mm and 6.5 mm) and lengths (20 mm, 25 mm, 30 mm and 35 mm). Contact stresses on the surface of cancellous bone in different areas were calculated. Compared to screws with diameter of 3.5 mm, stresses on the surface of bone defect reduced 5.75% of 5 mm and 10.68% of 6.5 mm for the screw length of 20 mm, 4.23% of 5 mm and 9.16% of 6.5 mm for 25 mm, 6.65% of 5 mm and 12.30% of 6.5 mm for 30 mm, and 5.05% of 5 mm and 12.16% of 6.5 mm for 35 mm. Compared to screws with diameter of 5 mm, stresses on the surface of defect reduced 5.24%, 5.15%, 6.05%, and 7.49% of 6.5 mm for the screw length of 20, 25, 30, and 35 mm. However, it did not show any significant difference in other comparisons. For the treatment of tibial defect in TKA with cement-screw technique, longer screw may not achieve better stability, but the thicker screw can reduce more stresses on the surface of tibial defect and achieve better stability. However, the depth of bone defect must be considered when making a choice.

Haemonchus contortus is one of the most important parasitic nematodes of small ruminants around the world, particularly in tropical and subtropical regions. The control of haemonchosis relies mainly on anthelmintics, but the excessive and prolonged use of anthelmintics is causing serious drug resistance issues in many countries. As benzimidazole (BZ) anthelmintics have been broadly used in China, we hypothesized that resistance is widespread. Given the link between three known single nucleotide polymorphisms (SNPs, designated F167Y, E198A and F200Y) in the isotype-1 β-tubulin gene and BZ resistance, our goal here was to explore the presence of these mutations in H. contortus from small ruminants (sheep and goats) from eight provinces in China using PCR-coupled sequencing. In addition, the genetic diversity and genetic relationship of isotype-1 β-tubulin sequence haplotypes were also investigated. Among 192 H. contortus adult individuals representing the eight populations, we identified six distinct sequence types, five of which had SNP E198A (GCA) and/or F200Y (TAC). Sequence analysis showed that the frequencies of SNPs E198A and F200Y were 0–70% and 0–31%, respectively. SNP F167Y (TAC) was not detected in any population. In addition, high haplotype diversities (0.455–0.939) and nucleotide diversities (0.018–0.039) were calculated. A network analysis of the isotype-1 β-tubulin gene sequences showed that SNPs E198A and F200Y occurred in multiple distinct groupings, suggesting multiple independent origins of these SNPs. The findings of this first study of SNPs in the isotype-1 β-tubulin gene of H. contortus populations suggest that BZ resistance is prevalent in some regions of China, and that any control strategy might focus on monitoring BZ resistance in this country.

Repairing skin wounds has always been challenging in clinical practice. The new skin tissue engineering scaffold provides innovative ways to address these challenges with a good chance of success because of its stable mechanical properties, biodegradability, and antibacterial properties. This paper presents the fabrication and evaluation of a three-dimensional composite scaffold made with sulfated silk fibroin, chitosan, and hydroxyapatite (SSF/CS/HAP). An electron microscope shows that the scaffold has an aperture of 15-20 μm, while an absorption performance test shows that its expansion index reaches 779%. The co-culture of L929 cells and the CCK-8 experiments demonstrated good cell compatibility and low scaffold cytotoxicity, respectively. Meanwhile, in vivo experiments demonstrate that rats with SSF/CS/HAP scaffold-treated neck wounds heal faster. In the wound skin tissue of the SSF/CS/HAP scaffold group, immunohistochemistry indicates a more rapid and mature development of hair follicles. This study successfully developed a novel skin tissue engineering scaffold material with high moisture retention, high tissue compatibility, and low cytotoxicity, demonstrating its ability to improve wound repair with promising potential for tissue engineering applications., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier Inc. All rights reserved.)