Search

Batch washing experiments were used to evaluate the feasibility of using biosurfactants for the removal of heavy metals from sediments. Surfactin from Bacillus subtilis, rhamnolipids from Pseudomonas aeruginosa and sophorolipid from Torulopsis bombicola were evaluated using a metal-contaminated sediment (110mg/kg copper and 3300mg/kg zinc). A single washing with 0.5% rhamnolipid removed 65% of the copper and 18% of the zinc, whereas 4% sophorolipid removed 25% of the copper and 60% of the zinc. Surfactin was less effective, removing 15% of the copper and 6% of the zinc. The technique of ultrafiltration and zeta potential measurements were used to determine the mechanism of metal removal by the surfactants. It was then postulated that metal removal by the biosurfactants occurs through sorption of the surfactant on to the soil surface and complexation with the metal, detachment of the metal from the soil into the soil solution and hence association with surfactant micelles. Sequential extraction procedures were used on the sediment to determine the speciation of the heavy metals before and after surfactant washing. The carbonate and oxide fractions accounted for over 90% of the zinc present in the sediments. The organic fraction constituted over 70% of the copper. Sequential extraction of the sediments after washing with the various surfactants indicated that the biosurfactants, rhamnolipid and surfactin could remove the organically-bound copper and that the sophorolipid could remove the carbonate and oxide-bound zinc. Therefore, heavy metal removal from sediments is feasible and further research will be conducted.

Sediments dewatering is frequently necessary after dredging to remediate and treat contaminants. Methods include draining of the water in lagoons with or without coagulants and flocculants, or using presses or centrifuges. Treatment methods are similar to those used for soil and include pretreatment, physical separation, thermal processes, biological decontamination, stabilization/solidification and washing. However, compared to soil treatment, few remediation techniques have been commercially used for sediments. In this paper, a review of the methods that have been used and an evaluation of developed and developing technologies is made. Sequential extraction technique can be a useful tool for determining metal speciation before and after washing. Solidification/stabilization techniques are successful but significant monitoring is required, since the solidification process can be reversible. In addition, the presence of organics can reduce treatment efficiency. Vitrification is applicable for sediments but expensive. Only if a useful glass product can be sold will this process be economically viable. Thermal processes are only applicable for removal of volatile metals, such as mercury and costs are high. Biological processes are under development and have the potential to be low cost. Since few low cost metal treatment processes for sediments are available, there exists significant demand for further development. Pretreatment may be one of the methods that can reduce costs by reducing the volumes of sediments that need to be treated.

Certain studies on basophils require highly purified functionally intact cell preparations. Here, a three-step procedure is described that meets these requirements. The procedure consists of a Ficoll density gradient step, counterflow elutriation and negative selection by magnetic cell sorting (MACS). The mean purity of basophils obtained from 30 donors was 97.6+/-3.96% with a viability of 99.6+/-0.83%. The recovery rate was 49.7+/-15.6%. The cells had a normal morphological appearance as assessed by May-Grünwald-stained cytospins and were functionally intact as shown by their unaltered capacity to release histamine and interleukin 4 (IL-4) following immunological activation. This procedure is a clear improvement over currently available techniques and should facilitate future investigations on basophils.

Although other aromatic compounds (e.g., benzene, toluene, polycyclic aromatic hydrocarbons (PAH), etc.) have been thoroughly studied over the years, styrene has been given little attention probably due to its lower rate of industrial use. In addition, it is less toxic than benzene and PAH, proven carcinogens. However, it is classified as a mutagen and thus potentially carcinogenic. Its main use is in the production of the polymer polystyrene and in the production of plastics, rubber, resins, and insulators. Entry into the environment is mainly through industrial and municipal discharges. In this review, the toxicological effects of styrene on humans, animals, and plants are discussed. Its mode of entry and methods of monitoring its presence are examined. Although its effects on humans and aquatic life have been studied, the data on short- or long-term exposures to plants, birds, and land animals are insufficient to be conclusive. Since exposure to workers can result in memory loss, difficulties in concentration and learning, brain and liver damage, and cancer, development of accurate methods to monitor its exposure is essential. In addition, the review outlines the present state of styrene in the environment and suggests ways to deal with its presence. It might appear that the quantities are not sufficient to harm humans, but more data are necessary to evaluate its effect, especially on workers who are regularly exposed to it.

A method for the determination of aspartame (N-L-alpha-aspartyl-L-phenylalanine methyl ester) and its metabolites, applicable on a routine quality assurance basis, is described. Liquid samples (diet Coke, 7-Up, Pepsi, etc.) were injected directly onto a mini-cartridge reversed-phase column on a high-performance liquid chromatographic system, whereas solid samples (Equal, hot chocolate powder, pudding, etc.) were extracted with water. Optimising chromatographic conditions resulted in resolved components of interest within 12 min. The by-products were confirmed by mass spectrometry. Although the method was developed on a two-pump HPLC system fitted with a diode-array detector, it is straightforward and can be transformed to the simplest HPLC configuration. Using a single-piston pump (with damper), a fixed-wavelength detector and a recorder/integrator, the degradation of products can be monitored as they decompose. The results obtained were in harmony with previously reported tedious methods. The method is simple, rapid, quantitative and does not involve complex, hazardous or toxic chemistry.

The purpose of this study was to compare hospital charges for carotid endarterectomy on a surgeon-specific basis. The cost of carotid endarterectomy is influenced by preoperative evaluation, operating time, use of the intensive care unit, length of hospital stay, and surgical results. Length of stay and average hospital charges for 18 doctors performing 344 carotid endarterectomies at three hospitals were analyzed. Outcome data were also reviewed. The results demonstrated a wide variation in hospital charges among surgeons. Surgeons using the most cost-effective measures achieved comparable or superior outcomes. In an era of managed care, severe cost constraints mandate that surgeons perform similar studies in their own communities so that cost-effective clinical pathways can be developed. With the use of appropriate guidelines, carotid endarterectomy can be performed at relatively low cost without sacrificing quality.

A simple scheme was developed for the rapid purification of antimicrobial peptides from the skin of Xenopus laevis. An extract of the frog skin was prepared using an acidic medium designed to maximize the solubilization of low-molecular-weight peptides. This extract was subjected to an enrichment procedure using C18 Sep Pak cartridges to yield a salt-free fraction, devoid of high-molecular-weight proteins. This fraction was in turn subjected to heparin affinity high-performance liquid chromatography on a Shodex AF-Pak column. All the antibacterial activity bound to the column and could be eluted using a linear gradient of increasing sodium chloride concentration. Antibacterial activity emerged from the column in fractions corresponding to a sodium chloride concentration of 0.45 M. Reversed-phase high-performance liquid chromatography resolved this material into a series of compounds which could be readily characterized using a combination of amino acid analysis and ion-spray mass spectrometry. Each peptide was found to be antimicrobial and each was positively identified as belonging to a family of amphipathic helix-forming peptides characterized by other investigators. Listed in their order of elution from the reversed-phase column the peptides were magainin 2, magainin 1, peptide-glycine-leucine amide, xenopsin precursor fragment, levitide precursor fragment, and a mixture of fragments derived from the caerulein precursor. These peptides owe their antimicrobial properties to a predeliction to forming amphipathic alpha-helical structures when associated with lipid membranes.(ABSTRACT TRUNCATED AT 250 WORDS)

Persistent sciatic artery (PSA) is a rare congenital malformation that is complicated by aneurysm formation in more than 25% of the reported cases. Two cases of aneurysm of the PSA are presented. Twenty-six aneurysms of the PSA, including our two cases, have been reported in the English literature in the last three decades. Early surgical treatment is warranted to decrease the 25% amputation rate associated with thromboembolic complications. The posterior, transgluteal repair of this aneurysm affords excellent exposure and avoids a long bypass graft, multiple incisions, and staged procedures. Magnetic resonance imaging may be helpful in preoperative evaluation of the feasibility of proximal, extrapelvic vascular control.

The efficacy of carotid endarterectomy in preventing stroke is clearly related to appropriate patient selection and low surgical morbidity and mortality. It has been suggested that since results at some centers are better than nationwide statistics, perhaps the operation should be limited to those institutions. In this paper we present an experience with carotid endarterectomy over the past twelve years. These 566 consecutive cases were performed by two vascular surgeons in a large metropolitan area using thirteen different hospitals ranging from 150 to 500 beds. Our mortality of 0.5% and permanent stroke incidence of 1.6% did not vary significantly from hospital to hospital. Where the results of surgical audits were available from the individual hospitals, the overall complication rates were significantly higher. We conclude that individual surgeons, not institutions, determine the efficacy of carotid endarterectomy in community practice.