Search

The analysis of impurities in a uranium ore concentrate (UOC) could provide information regarding the source, production history, and potential intended use of the UOC. This study involves the analysis of UOC samples for phosphorus and sulfur. Concentrations were determined by triple quadrupole inductively coupled plasma - mass spectrometry and compared with results from a pyrohydrolysis method as well as previously reported results. The sulfur and phosphorus concentrations, determined by the mass spectrometer, were used to explore possible trends in a series of UOC material, and the uncertainties were calculated using GUM workbench software. The triple quadrupole inductively coupled plasma - mass spectrometer method allows for the removal of interferences in the analysis of species., (Published by Elsevier B.V.)

The adoption of silver nanoparticles in consumer goods has raised concerns about the potential environmental harm of their widespread use. We studied chemical transformations that Ag NPs may undergo as they pass through sulfide-rich conditions common in waste water treatment plants (WWTPs), which may limit the release of Ag + from Ag NPs due to the formation of low-solubility silver sulfide (Ag 2 S). However, it is uncertain whether sulfidation is complete and if sulfidized Ag NPs continue to release Ag + . To address these uncertainties, we monitored the reaction of Ag NPs with various levels of sulfide with an ion selective electrode and UV/visible spectrophotometry over the course of two months. We characterized the products of the sulfidation reactions with a purge-and-trap acid volatile sulfide (AVS) analysis, which served as a measure of the stability of the sulfidized products because sulfide would be readily lost to oxidation unless it is stabilized as Ag 2 S. The Ag NP surface plasmon resonance (SPR) absorbance peak was initially diminished and then returned over the course of several days after reaction with limited amounts of sulfide, suggesting a dynamic system that may retain some characteristics of the pristine Ag NPs. However, ICP-MS analysis of sulfidized Ag NP suspensions over a two-month period demonstrates that sulfidation limits the release of Ag + ions from nanosilver that pass through a WWTP, even when sulfide concentrations are limited relative to silver., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Purpose: The treatment of distal radius fractures with volar locked plating (VLP) has gained popularity. Many different designs and sizes of plates afford a wide variety of configurations of locking screws that can be placed into the distal fracture fragment. The purpose of this study was to determine whether using half of the distal locking screws decreased stability when compared with using all possible distal locking screws with 4 different VLP systems., Methods: Twenty-four identical synthetic distal radius sawbone models were instrumented with 1 of 4 designs of VLP devices over a standardized dorsal wedge osteotomy to simulate a dorsally comminuted, extra-articular distal radius fracture. Distal locking screws were placed in varying configurations. Six radii per plate model with different screw configurations then underwent axial loading, volar bending, and dorsal bending using a servohydraulic machine. Distal fragment displacement was recorded using a differential variable reluctance transducer., Results: There was no significant difference in fracture fragment displacement when using half of the distal locking screw set compared with using the full screw set. Mean differences in displacement between half and full screws were less than 0.1 mm. All configurations had the greatest magnitude of displacement during axial loading. Mean displacement was less in plates containing 2 rows of distal locking screws (-0.4 mm) compared with plates containing 1 row (-0.6 mm)., Conclusions: Using half of the distal locking screws in VLP in an extra-articular, nonosteoporotic distal radial fracture model with noncyclical, nondestructive loading does not decrease construct stability compared with using all of the screws. Not filling all holes in VLP is more cost effective and does not sacrifice plate stiffness or construct stability. Plates with 2 rows of distal locking screws create more stable fixation than plates with 1 row of distal locking screws., (Copyright © 2013 American Society for Surgery of the Hand. Published by Elsevier Inc. All rights reserved.)