Search

Fiber-reinforced biocomposites were widely considered as the optimal sustainable alternative to traditional petroleum-based polymers due to their renewable, degradable, and environmentally friendly characteristics, along with economic benefits. However, the poor interfacial bonding between the matrix and natural fiber reinforcement remained a key issue limiting their mechanical and thermal properties. Focusing on cost-effective, convenient, and low-pollution chemical methods, this work proposed a strategy for in-situ synthesis of composite structures on bamboo fiber (BF) surfaces. Crude chitosan (CS) and reclaimed tannic acid (TA) were utilized as the raw materials, to construct stereo-netlike chitosan @ tannin structures (CS@TA) via a one-pot method facilitated by hydrogen bonding and complexation. The influence of reactant concentration and pH value on the process was further investigated and optimized. The CS@TA structure improved the interfacial bonding between the BF reinforcement and matrix poly(3-hydroxybutyrate) (PHB), and this non-amino-driven construction provided a potential reaction platform for functionalizing the interfacial layer. The modified biocomposite showed improvements in tensile and impact strengths (51.58 %, 41.18 %), also in tensile and flexural moduli (13.59 %, 26.88 %). Enhancements were also observed in thermal properties and heat capacity. This work presents a simple and promising approach to increase biocomposite interface bonding., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

In order to achieve an aerogel with both rigid pore structures and desired flexibility, stiff carboxyl-functionalized cellulose nanofiber (CNFs) were introduced into a flexible polyvinyl alcohol-polyethyleneimine (PVA-PEI) crosslinking network, with 4-formylphenylboronic acid (4FPBA) bridging within the PVA-PEI network to enable dynamic boroxine and imine bond formation. The strong covalent bonds and hydrogen connections between CNF and the crosslinking network enhanced the wet stability of the aerogel while also contributed to its thermal stability. Importantly, the harmonious coordination between the stiff CNF and the flexible polymer chains not only facilitated aerogel flexibility but also enhanced its increased specific surface area by improving pore structure. Moreover, the inclusion of CNF enhanced the adsorption capacity of the aerogel, rendering it effective for removing heavy metal ions. The specific surface area and adsorption capacity for copper ions of the aerogel increased significantly with a 3 wt% addition CNF suspension, reaching 19.74 m 2  g -1 and 60.28 mg g -1 , respectively. These values represent a remarkable increase of 590.21 % and 213.96 %, respectively, compared to the blank aerogel. The CNF-enhanced aerogel in this study, characterized by its well-defined pore structures, and desired flexibility, demonstrates versatile applicability across multiple domains, including environmental protection, thermal insulation, electrode fabrication, and beyond., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Natural plant fiber-reinforced bio-based polymer composites are widely attracting attention because of their economical, readily available, low carbon, and biodegradable, and showing promise in gradually replacing petroleum-based composites. Nevertheless, the fragile interfacial bonding between fiber and substrate hinders the progression of low-cost and abundant sustainable high-performance biocomposites. In this paper, a novel high-performance sustainable biocomposite was built by introducing a high density strong hydrogen-bonded bridging interface based on tannic acid (TA) between bamboo fibers (BFs) and PBSA. Through comprehensive analysis, this strategy endowed the biocomposites with better mechanical properties, thermal stability, dynamic thermo-mechanical properties and water resistance. The optimum performance of the composites was achieved when the TA concentration was 2 g/L. Tensile strength as well as modulus, flexural strength as well as modulus, and impact strength improved by 22 %, 10 %, 15 %, 35 %, and 25 % respectively. Additionally, the initial degradation temperature(T onset ) and maximum degradation temperature(T max ) increased by 12.07 °C and 14.8 °C respectively. The maximum storage modulus(E'), room temperature E', and loss modulus(E")elevated by 199 %, 75 %, and 181 % respectively. Moreover, the water absorption rate decreased by 59 %. The strong hydrogen-bonded bridging interface serves as a novel model and theory for biocomposite interface engineering. At the same time, it offers a promising future for the development of high performance sustainable biocomposites with low cost and abundant biomass resources and contributes to their wide application in aerospace, automotive, biomedical and other field., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Marine biological resources, serving as a renewable and sustainable reservoir, holds significant import for the utilization of composite material. Hence, we produced bamboo fiber/poly(3-hydroxybutyrate) (BF/PHB) biocomposites with exceptional performance and economic viability, drawing inspiration from the resilience of crustacean shells. Polyaminoethyl modified chitin (PAECT) was synthesized using the alkali freeze-thaw method and introduced into the interface between BF and PHB to improve interfacial adhesion. The resulting chitin fibers, characterized by their intertwined helical chains, constructed a flexible mesh structure on the BF surface through an electrostatic self-assembly approach. The interwoven PAECT filaments infiltrated the dual-phase structure, acting as a promoter of interfacial compatibility, while the flexible chitin network provided a greater capacity for deformation accommodation. Consequently, both impact and tensile strength of the BF/PHB composites were notably enhanced. Additionally, this flexible layer ameliorated the thermal stability and crystalline properties of the composites. This investigation aimed to leverage the distinctive helical configuration of chitin to facilitate the advancement of bio-reinforced composites., Competing Interests: Declaration of competing interest The authors declare that they have no conflicts of interest., (Copyright © 2024. Published by Elsevier B.V.)

Bamboo fiber (BF) reinforced polyhydroxybutyrate (PHB) has become popular in developing an eco-friendly and sustainable biocomposite, while the weak interfacial compatibility between them is a major problem to overcome. This work, inspired by mussel super adhesion, creates a facile, highly efficient, and environmentally friendly solution based on in situ laccase-catalysed dopamine polymerization under a naturally acidic environment. The result indicates that a stabilized polydopamine coating is successfully grafted onto the lignin of BF, and it also enhances the thermal stability of the BF and biocomposite. Furthermore, modification of BF via laccase-catalysed polydopamine is superior to the conventional method of polydopamine under alkaline condition, and has outstanding advantages in terms of BF integrity protection. The optimal composition of biocomposite with BF treated by polydopamine under 1 U/mL concentration of laccase shows improvement in the impact strength, tensile strength, tensile modulus, bending strength, and modulus of elastic by 33.85 %, 9.27 %, 31.74 %, 11.76 %, and 12.92 %, respectively, compared to the unmodified counterpart. This work provides an insightful understanding of the mechanism and benefits of laccase-catalysed polydopamine modification of BF in a natural environment. It contributes to the efficient and environmentally friendly utilization of polydopamine for fabricating high-performance lignocellulosic fiber reinforced biocomposites., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Shuangbao Zhang, Zhenghao Chen, Keke Du, Mustapha Boukhair report financial support was provided by National Natural Science Foundation of China (32171707). Shuangbao Zhang, Zhenghao Chen, Keke Du, Mustapha Boukhair report financial support was provided by Beijing Natural Science Foundation (6202024). Zhenghao Chen, Hui Li report financial support was provided by The China Scholarship Council (202206510012)., (Copyright © 2023. Published by Elsevier B.V.)