Search

An electrochemical free chlorine sensor was developed by modifying a lab-made screen-printed carbon electrode (SPCE) with gold nanoparticles synthesized with polyvinylpyrrolidone (AuNPs-PVP). The electrode was made by screen printing carbon ink on a waste digital versatile disc (SPC-wDVD). PVP was used to stabilize AuNPs. Scanning electron microscopy showed that AuNPs aggregated without the stabilizer. The electrochemical behavior of the SPC-wDVD was evaluated by comparison with commercial SPCEs from two companies. Electrochemical characterization involved cyclic voltammetry and electrochemical impedance spectroscopy. The detection of free chlorine in water samples was continuous, facilitated by a flow-injection system. In the best condition, the developed sensor exhibited linearity from 0.25 to 3.0 and 3.0 to 500 mg L -1 . The limit of detection was 0.1 mg L -1 . The stability of the sensor enabled the detection of free chlorine at least 475 times with an RSD of 3.2 %. The AuNPs-PVP/SPC-wDVD was able to detect free chlorine in drinking water, tap water and swimming pool water. The agreement between the results obtained with the proposed method and the standard spectrophotometric method confirmed the precision of the developed sensor., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

In this work, flower-like ZnO nanoparticles (ZnONPs) were synthesized using zinc nitrate (Zn(NO 3 ) 2 6H 2 O) as a precursor with KOH. The morphology of the ZnONPs was controlled by varying the synthesis temperature at 50, 75 and 95 °C. The morphology and structure of ZnONPs were characterized using Scanning Electron Microscopy, and X-Ray Diffraction and Brunauer-Emmett Teller analysis. ZnONPs were successfully synthesized by a simple chemical precipitation method. A synthesis temperature of 75 °C produced the most suitable flower-like ZnONPs, which were combined with graphene nanoplatelets to develop a label-free electrochemical immunosensor for the detection of the colon cancer biomarker carcinoembryonic antigen in human serum. Under optimum conditions, the developed immunosensor showed a linear range of 0.5-10.0 ng mL -1 with a limit of detection of 0.44 ng mL -1 . The label-free electrochemical immunosensor exhibited good selectivity, reproducibility, and repeatability, and recoveries were excellent. The immunosensor is used with a Near-Field Communication potentiostat connected to a smartphone to facilitate point-of-care cancer detection in low-resource locations., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

A novel label-free electrochemical immunosensor was prepared for the detection of carbohydrate antigen 19-9 (CA19-9) and carcinoembryonic antigen (CEA) as biomarkers of cholangiocarcinoma (CCA). A nanocomposite of gold nanoparticles, molybdenum trioxide, and chitosan (Au-MoO 3 -Chi) was layer-by-layer assembled on the porous graphene (PG) modified a dual screen-printed electrode using a self-assembling technique, which increased surface area and conductivity and enhanced the adsorption of immobilized antibodies. The stepwise self-assembling procedure of the modified electrode was further characterized morphologically and functionally. The electroanalytical detection of biomarkers was based on the interaction between the antibody and antigen of each marker via linear sweep voltammetry using ferrocyanide/ferricyanide as an electrochemical redox indicator. Under optimized conditions, the fabricated immunosensor showed linear relationships between current change (ΔI) and antigen concentrations in two ranges: 0.0025-0.1 U mL -1 and 0.1-1.0 U mL -1 for CA19-9, and 0.001-0.01 ng mL -1 and 0.01-1.0 ng mL -1 for CEA. The limits of detection (LOD) were 1.0 mU mL -1 for CA19-9 and 0.5 pg mL -1 for CEA. Limits of quantitation (LOQ) were 3.3 mU mL -1 for CA19-9 and 1.6 pg mL -1 for CEA. The selectivity of the developed immunosensor was tested on mixtures of antigens and was then successfully applied to determine CA19-9 and CEA in human serum samples, producing satisfactory results consistent with the clinical method., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

A compact and low-cost multi-electrode array (MEA) is presented, comprising four working electrodes with shared reference and auxiliary electrodes. Prussian blue was electrodeposited on the MEA using chronoamperometry with a positive potential of 0.3 V. Prussian blue nanocubes (PBNCs) were formed, which were observed using scanning electron microscopy. The precision of the four working electrodes was demonstrated using ferric/ferro cyanide (RSD <5.8%). The surface roughness of the working electrodes of the fabricated MEA was investigated by atomic force microscopy and compared with that of a commercial MEA. The PBNCs were the platform for a label-free immunosensor that detected four breast cancer tumor markers (CEA, CA125, CA153, and CA199) using specific antibodies. The processes of antibody immobilization were investigated using cyclic voltammetry and electrochemical impedance spectroscopy. The immunosensor was evaluated using real human serum samples, yielding acceptable recoveries (95.1-104.1%, RSD < 3.9) for the four tumor markers. These findings confirmed that our label-free immunosensor based on PBNCs could be a promising device for point-of-care testing and could pave the way for the establishment of new platforms for the screening of various breast cancer tumor markers., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

A novel multiplexed label-free electrochemical immunosensor was fabricated using graphene/methylene blue-chitosan/antibody and bovine serum albumin on indium tin oxide glass electrode for the simultaneous determination of three types of tumor markers including carcinoembryonic antigen (CEA), cancer antigens 153 (CA153), and cancer antigen 125 (CA125). Cyclic voltammetry, electrochemical impedance spectroscopy, and scanning electron microscopy were employed to monitor each fabrication step. Under the optimized experiment conditions, the immunosensor exhibited good reproducibility and selectivity with linear ranges of 0.10-1.00 pg mL -1 and 1.00-100.00 pg mL -1 for CEA, 0.10-2.50 mU mL -1 and 2.50-100.00 mU mL -1 for CA153, 0.10-2.50 mU mL -1 and 2.50-100.00 mU mL -1 for CA125, a detection limit of 0.04 pg mL -1 for CEA, 0.04 mU mL -1 for CA153, and 0.04 mU mL -1 for CA125. This electrochemical immunosensor was successfully applied to detect three tumor markers in blood serum samples with good recoveries. The reliability of the electrochemical immunosensor to detect three tumor markers in blood serum samples was in good agreement (P > 0.05) with that of the enzyme-linked fluorescent assay method., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier B.V. All rights reserved.)