Search

Purpose: This study evaluated the effects of 3D-printing build orientation on accuracy, flexural modulus (FM), flexural strength (FS), and microhardness of selected, commercial 3D-printed provisional resins (3DRs)., Material and Methods: PMMA CAD/CAM provisional material (Vita Temp/Vita) served as Control. Four 3DRs (Cosmos-SLA/Yller, Cosmos-DLP/Yller, PriZma-Bioprov/Makertech, Nanolab/Wilcos) were used in three printing orientations (0°, 45°, and 90°). Printed samples were cleaned with isopropyl alcohol prior to post-curing in specific post-curing units. For each group, 20 bar-shaped samples (25 × 2x2 mm) and ten disc-shaped samples (15-mm diameter, 2.5-mm thick) were obtained. The dimensions of bar samples were measured and the mean percent errors were compared to the reference (digital) values to obtain "accuracy" (n = 20). Samples were then aged in distilled water at 37 °C and half were submitted to a three-point bend test in a universal testing machine after 24 h and the other half after 1 year (n = 10). Disc samples were polished prior to microhardness evaluation (n = 10). Microstructure and elemental composition of filler particles in the 3DRs were analyzed using scanning electron microscopy (SEM) and energy dispersive x-ray spectroscopy (EDS) (n = 3). Accuracy and microhardness were submitted to two way-, and FM and FS to three way-ANOVA, followed by Tukey's tests. Results of experimental groups were compared to a milled PMMA Control using Dunnett's tests, and Student's t-tests compared FM and FS to Control at different aging periods (α = 0.05)., Results: Except for Cosmos-DLP, the 90° orientation demonstrated the best overall accuracy in all dimensions evaluated. The overall accuracy of Cosmos-SLA was not significantly different from Control and higher than other 3DRs. The FM of all 3DRs was lower than Control, regardless of orientation and aging period. After 1 year of aging, FS of 45°-Cosmos-SLA and all orientations of PriZma were not different from Control, while 90°-Cosmos-SLA was higher. Build orientation had no influence on microhardness of the 3DRs: Nanolab was the only resin harder than Control. Very few nanometric spherical filler particles were found in Cosmos-SLA, Cosmos-DLP, and PriZma, while Nanolab presented higher number of particles having irregular shapes and sizes., Conclusions: In general, although build orientation did not influence microhardness results, the 90° -orientation resulted in the best overall accuracy for most 3DRs. After 1-year water storage, Cosmos-SLA printed vertically showed the highest FS, while the PMMA Control obtained the highest FM for both aging periods., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

Introduction: Orbital compartment syndrome (OCS) is a rare condition characterized by increased intraorbital pressure and hypoperfusion of critical neural structures. It is usually associated with external ophthalmoplegia. We report a case of postoperative OCS following a frontotemporal craniotomy and review pertinent literature., Case Description: A 3-year-old female patient presented with a 3-year history of refractory epilepsy and diagnosis of right frontobasal cortical dysplasia. She underwent an elective frontotemporal craniotomy to allow resection of dysplastic cortex. The intraoperative period was uneventful. Postoperatively, following removal of operating fields, we noticed proptosis and right periorbital swelling. A diagnosis of orbital compartment syndrome was made. At the pediatric intensive care unit, the patient underwent an emergency right lateral canthotomy with wide inferior and superior cantholysis. Nowadays she is in the fourth month of postoperative follow-up. There is still slight and almost indistinguishable exophthalmos, but her extrinsic eye movement ranges and reaction to light are normal., Discussion: OCS is a rare ophthalmologic emergency characterized by an acute rise in orbital pressure and may result in complete irreversible blindness if not rapidly treated. The frontotemporal or "pterional" craniotomy exposure requires a myocutaneous flap to be retracted anteriorly and inferiorly near the orbit. There may be orbital compression due to this flap leading to potential harmful complications. Attention to factors such as direct ocular pressure from skin flaps, congestion from head positioning, and adequate intraoperative eye protection may reduce the risk or allow faster management., (Copyright © 2017 Elsevier Inc. All rights reserved.)

Background: Child and maternal health outcomes have notably improved in Mexico since 1990, whereas rising adult mortality rates defy traditional epidemiological transition models in which decreased death rates occur across all ages. These trends suggest Mexico is experiencing a more complex, dissonant health transition than historically observed. Enduring inequalities between states further emphasise the need for more detailed health assessments over time. The Global Burden of Diseases, Injuries, and Risk Factors Study 2013 (GBD 2013) provides the comprehensive, comparable framework through which such national and subnational analyses can occur. This study offers a state-level quantification of disease burden and risk factor attribution in Mexico for the first time., Methods: We extracted data from GBD 2013 to assess mortality, causes of death, years of life lost (YLLs), years lived with disability (YLDs), disability-adjusted life-years (DALYs), and healthy life expectancy (HALE) in Mexico and its 32 states, along with eight comparator countries in the Americas. States were grouped by Marginalisation Index scores to compare subnational burden along a socioeconomic dimension. We split extracted data by state and applied GBD methods to generate estimates of burden, and attributable burden due to behavioural, metabolic, and environmental or occupational risks. We present results for 306 causes, 2337 sequelae, and 79 risk factors., Findings: From 1990 to 2013, life expectancy from birth in Mexico increased by 3·4 years (95% uncertainty interval 3·1-3·8), from 72·1 years (71·8-72·3) to 75·5 years (75·3-75·7), and these gains were more pronounced in states with high marginalisation. Nationally, age-standardised death rates fell 13·3% (11·9-14·6%) since 1990, but state-level reductions for all-cause mortality varied and gaps between life expectancy and years lived in full health, as measured by HALE, widened in several states. Progress in women's life expectancy exceeded that of men, in whom negligible improvements were observed since 2000. For many states, this trend corresponded with rising YLL rates from interpersonal violence and chronic kidney disease. Nationally, age-standardised YLL rates for diarrhoeal diseases and protein-energy malnutrition markedly decreased, ranking Mexico well above comparator countries. However, amid Mexico's progress against communicable diseases, chronic kidney disease burden rapidly climbed, with age-standardised YLL and DALY rates increasing more than 130% by 2013. For women, DALY rates from breast cancer also increased since 1990, rising 12·1% (4·6-23·1%). In 2013, the leading five causes of DALYs were diabetes, ischaemic heart disease, chronic kidney disease, low back and neck pain, and depressive disorders; the latter three were not among the leading five causes in 1990, further underscoring Mexico's rapid epidemiological transition. Leading risk factors for disease burden in 1990, such as undernutrition, were replaced by high fasting plasma glucose and high body-mass index by 2013. Attributable burden due to dietary risks also increased, accounting for more than 10% of DALYs in 2013., Interpretation: Mexico achieved sizeable reductions in burden due to several causes, such as diarrhoeal diseases, and risks factors, such as undernutrition and poor sanitation, which were mainly associated with maternal and child health interventions. Yet rising adult mortality rates from chronic kidney disease, diabetes, cirrhosis, and, since 2000, interpersonal violence drove deteriorating health outcomes, particularly in men. Although state inequalities from communicable diseases narrowed over time, non-communicable diseases and injury burdens varied markedly at local levels. The dissonance with which Mexico and its 32 states are experiencing epidemiological transitions might strain health-system responsiveness and performance, which stresses the importance of timely, evidence-informed health policies and programmes linked to the health needs of each state., Funding: Bill & Melinda Gates Foundation, Instituto Nacional de Salud Pública., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

Background: The Global Burden of Disease, Injuries, and Risk Factor study 2013 (GBD 2013) is the first of a series of annual updates of the GBD. Risk factor quantification, particularly of modifiable risk factors, can help to identify emerging threats to population health and opportunities for prevention. The GBD 2013 provides a timely opportunity to update the comparative risk assessment with new data for exposure, relative risks, and evidence on the appropriate counterfactual risk distribution., Methods: Attributable deaths, years of life lost, years lived with disability, and disability-adjusted life-years (DALYs) have been estimated for 79 risks or clusters of risks using the GBD 2010 methods. Risk-outcome pairs meeting explicit evidence criteria were assessed for 188 countries for the period 1990-2013 by age and sex using three inputs: risk exposure, relative risks, and the theoretical minimum risk exposure level (TMREL). Risks are organised into a hierarchy with blocks of behavioural, environmental and occupational, and metabolic risks at the first level of the hierarchy. The next level in the hierarchy includes nine clusters of related risks and two individual risks, with more detail provided at levels 3 and 4 of the hierarchy. Compared with GBD 2010, six new risk factors have been added: handwashing practices, occupational exposure to trichloroethylene, childhood wasting, childhood stunting, unsafe sex, and low glomerular filtration rate. For most risks, data for exposure were synthesised with a Bayesian meta-regression method, DisMod-MR 2.0, or spatial-temporal Gaussian process regression. Relative risks were based on meta-regressions of published cohort and intervention studies. Attributable burden for clusters of risks and all risks combined took into account evidence on the mediation of some risks such as high body-mass index (BMI) through other risks such as high systolic blood pressure and high cholesterol., Findings: All risks combined account for 57·2% (95% uncertainty interval [UI] 55·8-58·5) of deaths and 41·6% (40·1-43·0) of DALYs. Risks quantified account for 87·9% (86·5-89·3) of cardiovascular disease DALYs, ranging to a low of 0% for neonatal disorders and neglected tropical diseases and malaria. In terms of global DALYs in 2013, six risks or clusters of risks each caused more than 5% of DALYs: dietary risks accounting for 11·3 million deaths and 241·4 million DALYs, high systolic blood pressure for 10·4 million deaths and 208·1 million DALYs, child and maternal malnutrition for 1·7 million deaths and 176·9 million DALYs, tobacco smoke for 6·1 million deaths and 143·5 million DALYs, air pollution for 5·5 million deaths and 141·5 million DALYs, and high BMI for 4·4 million deaths and 134·0 million DALYs. Risk factor patterns vary across regions and countries and with time. In sub-Saharan Africa, the leading risk factors are child and maternal malnutrition, unsafe sex, and unsafe water, sanitation, and handwashing. In women, in nearly all countries in the Americas, north Africa, and the Middle East, and in many other high-income countries, high BMI is the leading risk factor, with high systolic blood pressure as the leading risk in most of Central and Eastern Europe and south and east Asia. For men, high systolic blood pressure or tobacco use are the leading risks in nearly all high-income countries, in north Africa and the Middle East, Europe, and Asia. For men and women, unsafe sex is the leading risk in a corridor from Kenya to South Africa., Interpretation: Behavioural, environmental and occupational, and metabolic risks can explain half of global mortality and more than one-third of global DALYs providing many opportunities for prevention. Of the larger risks, the attributable burden of high BMI has increased in the past 23 years. In view of the prominence of behavioural risk factors, behavioural and social science research on interventions for these risks should be strengthened. Many prevention and primary care policy options are available now to act on key risks., Funding: Bill & Melinda Gates Foundation., (Copyright © 2015 Elsevier Ltd. All rights reserved.)

Objective: This study sought to compare the effects and outcomes of two ophthalmic viscosurgical devices, 1.6% hyaluronic acid/4.0% chondroitin sulfate and 2.0% hydroxypropylmethylcellulose, during phacoemulsification., Methods: This prospective, randomized clinical trial comprised 78 eyes (39 patients) that received phacoemulsification performed by the same surgeon using a standardized technique. Patients were randomly assigned to receive either 1.6% hyaluronic acid/4.0% chondroitin sulfate or 2.0% hydroxypropylmethylcellulose on the first eye. The other eye was treated later and received the other viscoelastic agent. Preoperative and postoperative examinations (5, 24 and 48 hours; 7 and 14 days; 3 and 6 months) included measurements of the total volume of the ophthalmic viscosurgical device, ultrasound and washout times to completely remove the ophthalmic viscosurgical device, intraocular pressure, central corneal thickness and best-corrected visual acuity. The corneal endothelial cell count was measured at baseline and at six months postoperatively. ClinicalTrials.gov: NCT01387620., Results: There were no statistically significant differences between groups in terms of cataract density or ultrasound time. However, it took longer to remove 2.0% hydroxypropylmethylcellulose than 1.6% hyaluronic acid/ 4.0% chondroitin sulfate, and the amount of viscoelastic material used was greater in the 2.0% hydroxypropylmethylcellulose group. In addition, the best-corrected visual acuity was significantly better in the hyaluronic acid/ chondroitin sulfate group, but this preferable outcome was only observed at 24 hours after the operation. There were no statistically significant differences between the two ophthalmic viscosurgical devices regarding the central corneal thickness or intraocular pressure measurements at any point in time. The corneal endothelial cell count was significantly higher in the hyaluronic acid/chondroitin sulfate group., Conclusion: The ophthalmic viscosurgical device consisting of 1.6% hyaluronic acid/4.0% chondroitin sulfate was more efficient during phacoemulsification and was easier to remove after IOL implantation than 2.0% hydroxypropylmethylcellulose. In addition, the corneal endothelial cell count was significantly higher following the use of hyaluronic acid/chondroitin sulfate than with hydroxypropylmethylcellulose, which promoted an improved level of corneal endothelium protection.