Search

Fused Filament Fabrication (FFF)-based 3D printing is an efficient technique for developing medical implants, but it is not very useful in developing small yet mechanically robust design-specific fixtures such as dental implants (<15 mm). Specifically, it is challenging to 3D print robust Polyetheretherketone (PEEK) small implants due to PEEK's high melting temperature and melt viscosity. However, in this study, we efficiently utilize high-temperature FFF to develop the first-of-its-kind patient-specific robust PEEK dental implants with high print resolution. Specifically, we explore the effects of critical FFF processing conditions on the mechanical properties of the implants and subsequently determine an optimized set of processing conditions that are essential in developing durable dental implant systems. Our results indicate that the 3D printed dental implants exhibit good fatigue properties and suffice the clinical and industrial requirements for dental implants. Furthermore, we prove that the 3D printed implants exhibit adequate mechanical durability even after simulated (accelerated) aging of 30 years., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

This article demonstrates our efforts in developing and evaluating all-ceramic, biodegradable composites of calcium phosphate cements (CPCs) reinforced with silver (Ag)-doped magnesium phosphate (MgP) crystals. Two primary goals of this study were to 1) enhance CPC's poor mechanical properties with micro-platelet reinforcement, and 2) impart antibacterial functionalities in composites with the aim to inhibit surgical site infections (SSI). The work embodies three novel features. First, as opposed to well-known reinforcements with whisker or fiber-like morphology, we explored micro-platelets for the first time as the strengthening phase in the CPC matrix. Second, in contrast to conventional polymeric or calcium phosphate (CaP) fibrous reinforcements, newberyite (NB, MgHPO 4 .3H 2 O) micro-platelets belonging to the less explored yet promising MgP family, were evaluated as reinforcements for the first time. Third, NB micro-platelets were doped with Ag + ions (AgNB, Ag content: 2 wt%) for enhancing antibacterial functionalities. Results indicated that 1 wt% of AgNB micro-platelet incorporation in the CPC matrix enhanced the compressive and flexural strengths by 200% and 140% respectively as compared to the un-reinforced ones. Besides, antibacterial assays revealed effective bactericidal functionalities (>99% bacteria kill) of the AgNB reinforced CPCs against Escherichia coli. Finally, cytocompatibility studies confirmed favorable pre-osteoblast cell proliferation and differentiation in vitro. Hence, this effort was successful in developing a self-setting and injectable AgNB reinforced CPC composition with favorable mechanical and antibacterial properties., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

One of the most damaging pathologies that affects the health of both soft and hard tissues around the tooth is periodontitis. Clinically, periodontal tissue destruction has been managed by an integrated approach involving elimination of injured tissues followed by regenerative strategies with bone substitutes and/or barrier membranes. Regrettably, a barrier membrane with predictable mechanical integrity and multifunctional therapeutic features has yet to be established. Herein, we report a fiber-reinforced hydrogel with unprecedented tunability in terms of mechanical competence and therapeutic features by integration of highly porous poly(ε-caprolactone) fibrous mesh(es) with well-controlled 3D architecture into bioactive amorphous magnesium phosphate-laden gelatin methacryloyl hydrogels. The presence of amorphous magnesium phosphate and PCL mesh in the hydrogel can control the mechanical properties and improve the osteogenic ability, opening a tremendous opportunity in guided bone regeneration (GBR). Results demonstrate that the presence of PCL meshes fabricated via melt electrowriting can delay hydrogel degradation preventing soft tissue invasion and providing the mechanical barrier to allow time for slower migrating progenitor cells to participate in bone regeneration due to their ability to differentiate into bone-forming cells. Altogether, our approach offers a platform technology for the development of the next-generation of GBR membranes with tunable mechanical and therapeutic properties to amplify bone regeneration in compromised sites. STATEMENT OF SIGNIFICANCE: In this study, we developed a fiber-reinforced hydrogel platform with unprecedented tunability in terms of mechanical competence and therapeutic features for guided bone regeneration. We successfully integrated highly porous poly(ε-caprolactone) [PCL] mesh(es) into amorphous magnesium phosphate-laden hydrogels. The stiffness of the engineered hydrogel was significantly enhanced, and this reinforcing effect could be modulated by altering the number of PCL meshes and tailoring the AMP concentration. Furthermore, the fiber-reinforced hydrogel showed favorable cellular responses, significantly higher rates of mineralization, upregulation of osteogenic-related genes and bone formation. In sum, these fiber-reinforced membranes in combination with therapeutic agent(s) embedded in the hydrogel offer a robust, highly tunable platform to amplify bone regeneration not only in periodontal defects, but also in other craniomaxillofacial sites., Competing Interests: Declaration of Competing Interest The authors declare no competing financial interest or with respect to the authorship and/or publication of this article., (Copyright © 2020 Acta Materialia Inc. All rights reserved.)

The main theme of this paper is to review microwave-assisted synthesis and processing of calcium and magnesium phosphate bioceramics. Microwave processing of advanced materials has been an active field of research for the last three decades and has been already reviewed in the literature. Microwave processing of bioceramics is being pursued for almost the same period of time. Unfortunately, to the best of our knowledge, we are not aware of any comprehensive review in the literature. Our group has been a significant contributor to the field, and we feel that it is an appropriate time for reviewing the state-of-the-art of the field. The paper is divided into several sections. After rationalizing the motivation behind writing this paper in the introduction, the second section builds on some fundamental aspects of microwave-matter interactions. The third section, representing the synthesis aspects, is subdivided into five sub-sections focusing on various calcium and magnesium phosphates in both crystalline and amorphous forms. The fourth section focuses on magnesium phosphate-based bioceramics. The fifth and the sixth section describe results on the utility of microwave assistance in developing multi-functional coatings on medical implants and orthopedic cements respectively. The subsequent section reviews results on microwave sintering of calcium and magnesium phosphates. The paper concludes with remarks on unresolved issues and future directions of research. It is expected that this comprehensive review on the interdisciplinary topic will further propel the exploration of other novel applications of microwave technology in processing biomaterials by a diverse group of scientists and engineers. STATEMENT OF SIGNIFICANCE: 1. This review highlights the broad-spectrum capabilities of microwave applications in processing orthopedic bioceramics. 2. The article covers "processing" in the broadest sense of the word, comprising of material synthesis, sintering, coating formation, and setting of orthopedic cements. It also expands beyond conventional calcium phosphates to include the emergent family of magnesium phosphates. 3. In vitro/in vivo responses of microwave-processed bioceramics are discussed thus providing an integral understanding of biological aspects of these materials. 4. The comprehensive review on this interdisciplinary topic will help researchers in various disciplines to appreciate the significance and usefulness of microwaves in biomaterials processing. Further, we also believe that it will propel the exploration of other novel applications of microwave technology in the biomaterials sector., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020. Published by Elsevier Ltd.)

Polyetheretherketone (PEEK) with great thermal and chemical stability, desirable mechanical properties and promising biocompatibility is being widely used as orthopedic and dental implant materials. However, the bioinert surface of PEEK can hinder direct osseointegration between the host tissue and PEEK based implants. The important signatures of this paper are as follows. First, we report for the formation of osseointegrable amorphous magnesium phosphate (AMP) coating on PEEK surface using microwave energy. Second, coatings consist of nano-sized AMP particles with a stacked thickness of 800nm. Third, coatings enhance bioactivity in-vitro and induce significantly high amount of bone-like apatite coating, when soaked in simulated body fluid (SBF). Fourth, the as-deposited AMP coatings present no cytotoxicity effects and are beneficial for cell adhesion at early stage. Finally, the high levels of expression of osteocalcin (OCN) in cells cultured on AMP coated PEEK samples indicate that AMP coatings can promote new bone formation and hence osseointegration., (Copyright © 2017 Elsevier B.V. All rights reserved.)

Magnesium ions are directly involved in numerous biological mechanisms; for example, they play an important part in the regulation of ion channels, DNA stabilization, enzyme activation and stimulation of cell growth and proliferation. This alkaline earth metal has gained great popularity in orthopedic applications in recent years. Magnesium-based bioceramics include a large group of magnesium containing compounds such as oxides, phosphates and silicates, that are involved in orthopedic applications like bone cements, bone scaffolds or implant coatings. This article aims to give a comprehensive review on different magnesium-based bioceramics, e.g. magnesium phosphates (MgO-P 2 O 5 ), calcium magnesium phosphates (CaO-MgO-P 2 O 5 ), and magnesium glasses (SiO 2 -MgO) with a strong focus on the chemistry and properties of magnesium phosphate containing cements as the main application form. In addition, the processing of magnesium phosphate minerals into macroporous scaffolds for tissue engineering applications by either using traditional porogens or by additive manufacturing approaches are reflected. Finally, the biological in vitro and in vivo properties of magnesium phosphates for bone regeneration are summarized, which show promising results regarding the application as bone replacement material, but still lack in terms of testing in large animal models, load-bearing application sites and clinical data., Statement of Significance: Though bone substitutes from calcium phosphates have been investigated for a long time, a new trend is visible in the biomaterials sector: magnesium based bioceramics from magnesium phosphates and silicates due to the special biological significance of magnesium ions in enzymatic activation, cell growth and proliferation, etc. In contrast to pure magnesium implants, such formulations do not release hydrogen during degradation. As with calcium based bioceramics, magnesium based bioceramics are used for the development of diverse applications such as cements, macroporous scaffolds and coatings. From this perspective, we present a systematic overview on diverse kinds of magnesium based bioceramics, their processing regimes for different clinical purposes and their behavior both in vitro and in vivo., (Copyright © 2017 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

Purpose: The purpose of this work was to develop, characterize and compare electrospun nanofiber inserts (ENIs) and solvent cast polymeric inserts (SCIs) for ocular drug delivery., Methods: ENI and SCI of 1%, 5% and 10% w/w dexamethasone were fabricated using a blend of poly-lactic acid (PLA) and poly-vinyl alcohol (PVA). Inserts were characterized for morphology, thickness, pH, drug content, drug crystallinity, in vitro drug release, sterility, dimethylformamide (DMF) and chloroform content, and cytotoxicity., Results: The thickness of 1%, 5%, and 10% dexamethasone-loaded ENIs were found to be 50μm, 62.5μm, and 93.3μm, respectively, with good folding endurance. SCIs were brittle, with thickness values >200μm. Drug release rates from 1%, 5% and 10% ENIs were found to be 0.62μg/h, 1.46μg/h, and 2.30μg/h, respectively, while those from SCIs were erratic. DMF content in ENIs and SCIs were 0.007% w/w and 0.123% w/w, respectively, while chloroform was not detected. No cytotoxicity was observed from ENIs in cultured bovine corneal endothelial cells for up to 24h., Conclusion: We conclude that ENIs are better than SCIs and could be utilized as a potential delivery system for treating anterior segment ocular diseases., (Copyright © 2017. Published by Elsevier B.V.)

This paper is a sequel to our previous effort in developing Mg-phosphate orthopedic cements using amorphous Mg-phosphate (AMP) as the precursor. In this paper, we report a new real-time in situ technique to create macroporous bone growth substitute (BGS). The method uses biodegradable Mg-particles as the porogen. As opposed to the conventional wisdom of providing corrosion protection layers to biodegradable Mg-alloys, the present method uses the fast corrosion kinetics of Mg to create macropores in real time during the setting of the cement. An aqueous solution of PVA was used as the setting solution. Using this technique, a macroporous cement containing up to 91% porosity is obtained, as determined by pycnometry. Due to formation of H 2 gas bubbles from corrosion of Mg, the cement becomes macroporous. The pore sizes as big as 760μm were observed. The results of SBF soaking indicated change in crystallinity as confirmed via scanning electron microscopy (SEM) and X-ray diffraction (XRD). Our in vitro cytocompatibility evaluation also revealed that the macroporous bone growth substitute composed of bobierrite is cytocompatible and can improve gene expression., (Copyright © 2017 Elsevier B.V. All rights reserved.)

Biocompatible amorphous magnesium calcium phosphate (AMCP) particles were synthesized using ethanol in precipitation medium from moderately supersaturated solution at pH10. Some synthesis parameters such as, (Mg+Ca):P, Mg:Ca ratio and different drying methods on the structure and stability of as-produced powder was studied and characterized using SEM, XRD and cell cytocompatibility. The results showed that depending on the Mg(2+) concentration, nano crystalline Struvite (MgNH4PO4·6H2O) can also be alternatively formed. However, the as-formed AMCP preserved its amorphous structure after 7 days of incubation in SBF for tested phosphate concentration, and equally ionic concentration of magnesium and calcium., (Copyright © 2015 Elsevier B.V. All rights reserved.)

This work represents further effort from our group in developing monetite based calcium phosphate cements (CPC). These cements start with a calcium phosphate powder (MW-CPC) that is manufactured using microwave irradiation. Due to the robustness of the cement production process, we report that the starting materials can be derived from egg shells, a waste product from the poultry industry. The CPC were prepared with MW-CPC and aqueous setting solution. Results showed that the CPC hardened after mixing powdered cement with water for about 12.5±1 min. The compressive strength after 24h of incubation was approximately 8.45±1.29 MPa. In addition, adding colloidal nanosilica to CPC can accelerate the cement hardening (10±1 min) process by about 2.5 min and improve compressive strength (20.16±4.39 MPa), which is more than double the original strength. The interaction between nanosilica and CPC was monitored using an environmental scanning electron microscope (ESEM). While hardening, nanosilica can bond to the CPC crystal network for stabilization. The physical and biological studies performed on both cements suggest that they can potentially be used in orthopedics., (Copyright © 2015 Elsevier B.V. All rights reserved.)

Due to their unique biodegradability, magnesium alloys have been recognized as suitable metallic implant materials for degradable bone implants and bioresorbable cardiovascular stents. However, the extremely high degradation rate of magnesium alloys in physiological environment has restricted its practical application. This paper reports the use of a novel microwave assisted coating technology to improve the in vitro corrosion resistance and biocompatibility of Mg alloy AZ31. Results indicate that a dense calcium deficient hydroxyapatite (CDHA) layer was uniformly coated on a AZ31 substrate in less than 10min. Weight loss measurement and SEM were used to evaluate corrosion behaviors in vitro of coated samples and of non-coated samples. It was seen that CDHA coatings remarkably reduced the mass loss of AZ31 alloy after 7days of immersion in SBF. In addition, the prompt precipitation of bone-like apatite layer on the sample surface during immersion demonstrated a good bioactivity of the CDHA coatings. Proliferation of osteoblast cells was promoted in 5days of incubation, which indicated that the CDHA coatings could improve the cytocompatibility of the AZ31 alloy. All the results suggest that the CDHA coatings, serving as a protective layer, can enhance the corrosion resistance and biological response of magnesium alloys. Furthermore, this microwave assisted coating technology could be a promising method for rapid surface modification of biomedical materials., (Copyright © 2015 Elsevier B.V. All rights reserved.)

As biocompatible materials, magnesium phosphates have received a lot of attention for orthopedic applications. During the last decade multiple studies have shown advantages for magnesium phosphate such as lack of cytotoxicity, biocompatibility, strong mechanical properties, and high biodegradability. The present study investigates the role of Mg(+2) and Ca(+2) ions in the structure of magnesium phosphate and calcium phosphate nanoparticles. To directly compare the effect of Mg(+2) and Ca(+2) ions on structure of nanoparticles and their biological behavior, three groups of nanoparticles including amorphous magnesium phosphates (AMPs) which release Mg(+2), calcium magnesium phosphates (CMPs) which release Mg(+2) and Ca(+2), and hydroxyapatites (HAs) which release Ca(+2) were studied. SEM, TEM, XRD, and FTIR were used to evaluate the morphology, crystallinity, and chemical properties of the particles. AMP particles were homogeneous nanospheres, whereas CMPs were combinations of heterogeneous nanorods and nanospheres, and HAs which contained heterogeneous nanosphere particles. Cell compatibility was monitored in all groups to determine the cytotoxicity effect of particles on studied MC3T3-E1 preosteoblasts. AMPs showed significantly higher attachment rate than the HAs after 1 day and both AMPs and CMPs showed significantly higher proliferation rate when compared to HAs after 7days. Gene expression level of osteoblastic markers ALP, COL I, OCN, OPN, RUNX2 were monitored and they were normalized to GAPDH housekeeping gene. Beta actin expression level was monitored as the second housekeeping gene to confirm the accuracy of results. In general, AMPs and CMPs showed higher expression level of osteoblastic genes after 7 days which can further confirm the stimulating role of Mg(+2) and Ca(+2) ions in increasing the proliferation rate, differentiation, and mineralization of MC3T3-E1 preosteoblasts., (Copyright © 2015 Elsevier B.V. All rights reserved.)

The interest in developing calcium phosphate cement (CPC) as a drug delivery system has risen because of its capability to achieve local and controlled treatment to the site of the bone disease. The purpose of this study was to investigate the release pattern of drug-carrying carboxylic acid-functionalized multi-walled carbon nanotube (MWCNT)-reinforced monetite (DCPA, CaHPO4)-based CPC. Z-Leu-Leu-Leu-al (MG132), a small peptide molecule inhibiting NF-κB-mediated osteoclastic resorption, was used as a model drug. MG132 was added into the cement during setting and released into the medium used to culture indicator cells. Significant cell death was observed in osteoblast MC3T3-E1 cells cultured in the medium incubated with MG132-loaded CPC; however, with the presence of MWCNTs in the cement, the toxic effect was not detectable. NF-κB activation was quantified using a NF-κB promoter-driving luciferase reporter in human embryonic kidney 293 cells. The medium collected after incubation with drug-incorporated CPC with or without MWCNT inhibited TNFα-induced NF-κB activation indicating that the effective amount of MG132 was released. CPC/drug complex showed a rapid release within 24h whereas incorporation of MWCNTs attenuated this burst release effect. In addition, suppression of TNFα-induced osteoclast differentiation in RAW 264.7 cell culture also confirmed the sustained release of MWCNT/CPC/drug. Our data demonstrated the drug delivery capability of this cement composite, which can potentially be used to carry therapeutic molecules to improve bone regeneration in conjunction with its fracture stabilizing function. Furthermore, it suggested a novel approach to lessen the burst release effect of the CPC-based drug delivery system by incorporating functionalized MWCNTs., (Copyright © 2014 Elsevier B.V. All rights reserved.)

Fluorapatite (FA) has potential applications in dentistry and orthopedics, but its synthesis procedures are time consuming. The goal of the present study is to develop a quick microwave assisted solution combustion synthesis method (MASCS) for the production of FA particles. With this new processing, FA particles were successfully synthesized in minutes. Additionally, unique structures including nanotubes, hexagonal crystals, nanowhiskers, and plate agglomerates were prepared by controlling the solution composition and reaction time. In particular, the as-synthesized FA nanotubes presented a "Y" shape inner channel along the crystal axis. It is supposed that the channel formation is caused by the crystal growth and removal of water soluble salts during processing. The as-synthesized FA nanotubes showed good cytocompatibility, the cells cultured with a higher FA concentration demonstrated greater growth rate. With this new and easily applied MASCS processing application, FA nanoparticles have increased potential in dental and orthopedic applications., (Copyright © 2014 Elsevier B.V. All rights reserved.)

In this work we report a novel microwave assisted technology to deposit a uniform, ultra-thin apatite coating without any cracks on titanium implants in minutes. This method comprises of conventional biomimetic coating in synergism with microwave irradiation to result in alkaline earth phosphate nucleation. The microwave assisted coating process mainly follows the initial stages of biomimetic coating until the step of the Ca-P nuclei formation. After that, due to microwave irradiation more Ca-P nuclei are formed to cover the whole surface of the implant instead of the growth of deposited Ca-P nuclei to Ca-P globules and coatings. It is interesting to note the doping of Mg(2+) to Ca-P apatite coating can significantly change the properties and performances of as-deposited coatings. The hydrophilicity, physical properties, bioactivity, cell adhesion, and growth capability of as-deposited microwave assisted coatings were investigated. The study shows that this coating technology has great potential in biomedical applications. Additionally, since biomimetic coating can be applied to series of implant materials such as polymer, metals and glass, it is expected this microwave assisted coating technology can also be applied to these materials if they can remains stable at 100 °C, the boiling point of water., (© 2013.)

There are two interesting features of this paper. First, we report herein a novel microwave assisted technique to prepare phosphate based orthopedic cements, which do not generate any exothermicity during setting. The exothermic reactions during the setting of phosphate cements can cause tissue damage during the administration of injectable compositions and hence a solution to the problem is sought via microwave processing. This solution through microwave exposure is based on a phenomenon that microwave irradiation can remove all water molecules from the alkaline earth phosphate cement paste to temporarily stop the setting reaction while preserving the active precursor phase in the formulation. The setting reaction can be initiated a second time by adding aqueous medium, but without any exothermicity. Second, a special emphasis is placed on using this technique to synthesize magnesium phosphate cements for orthopedic applications with their enhanced mechanical properties and possible uses as drug and protein delivery vehicles. The as-synthesized cements were evaluated for the occurrences of exothermic reactions, setting times, presence of Mg-phosphate phases, compressive strength levels, microstructural features before and after soaking in (simulated body fluid) SBF, and in vitro cytocompatibility responses. The major results show that exposure to microwaves solves the exothermicity problem, while simultaneously improving the mechanical performance of hardened cements and reducing the setting times. As expected, the cements are also found to be cytocompatible. Finally, it is observed that this process can be applied to calcium phosphate cements system (CPCs) as well. Based on the results, this microwave exposure provides a novel technique for the processing of injectable phosphate bone cement compositions., (© 2013.)

In this study, we present results of our research on biodegradable monetite (DCPA, CaHPO4) cement with surface-modified multi-walled carbon nanotubes (mMWCNTs) as potential bone defect repair material. The cement pastes showed desirable handling properties and possessed a suitable setting time for use in surgical setting. The incorporation of mMWCNTs shortened the setting time of DCPA and increased the compressive strength of DCPA cement from 11.09±1.85 MPa to 21.56±2.47 MPa. The cytocompatibility of the materials was investigated in vitro using the preosteoblast cell line MC3T3-E1. An increase of cell numbers was observed on both DCPA and DCPA-mMWCNTs. Scanning electron microscopy (SEM) results also revealed an obvious cell growth on the surface of the cements. Based on these results, DCPA-mMWCNTs composite cements can be considered as potential bone defect repair materials., (© 2013.)

Biocompatible nanoparticles possessing fluorescent properties offer attractive possibilities for multifunctional bioimaging and/or drug and gene delivery applications. Many of the limitations with current imaging systems center on the properties of the optical probes in relation to equipment technical capabilities. Here we introduce a novel high aspect ratio and highly crystalline europium-doped calcium phosphate nanowhisker produced using a simple microwave-assisted solution combustion synthesis method for use as a multifunctional bioimaging probe. X-ray diffraction confirmed the material phase as europium-doped hydroxyapatite. Fluorescence emission and excitation spectra and their corresponding peaks were identified using spectrofluorimetry and validated with fluorescence, confocal and multiphoton microscopy. The nanowhiskers were found to exhibit red and far red wavelength fluorescence under ultraviolet excitation with an optimal peak emission of 696 nm achieved with a 350 nm excitation. Relatively narrow emission bands were observed, which may permit their use in multicolor imaging applications. Confocal and multiphoton microscopy confirmed that the nanoparticles provide sufficient intensity to be utilized in imaging applications., (Copyright © 2013 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

Fibrous bionanocomposites consisting of amorphous magnesium phosphate (AMP) nanospheres and polylactic acid (PLA) were fabricated by electrospinning. There are two important signatures of this paper. First, AMP, as an alternative to well-known calcium phosphate (CaP) materials, is added to PLA as the second phase. To the best of our knowledge, it is the first attempt to fabricate magnesium phosphate (MgP)/biopolymer composite. This is made possible by our previously reported research on the successful synthesis of AMP nanospheres via microwave processing. Second, the sustained release of magnesium and phosphate ions from PLA matrix can stimulate a series of cell responses. The structure of the composites and their bone-like apatite-forming abilities in simulated body fluid (SBF) were examined. Additionally, the effects on the proliferation and differentiation of preosteoblast cells were evaluated by performing in vitro cell culture and monitoring markers such as Osteocalcin (OCN), Osteopontin (OPN), Alkaline phosphatase (ALP) and Collagen type-I (Col I) using real-time polymerase chain reaction (PCR). For better dispersion of AMP in the fibers, a surfactant, 12-hydroxysteric acid (HSA), as previously reported in the literature, was used. However, HSA significantly inhibited the proliferation and differentiation of preosteoblast cells, indicating the potential risk in using HSA in the combination of AMP or MgP in tissue engineering applications., (Copyright © 2013 Elsevier B.V. All rights reserved.)

Compounds belonging to the calcium phosphate (CaP) system are known to be major constituents of bone and are bioactive to different extents in vitro and in vivo. Their chemical similarity makes them prime candidates for implants and bone tissue engineering scaffolds. CaP nanoparticles of amorphous hydroxyapatite (aHA) and dicalcium phosphate dihydrate (DCPD) were synthesized using chemical precipitation. Uniaxially pressed aHA and DCPD powders were subjected to microwave radiation to promote solid state phase transformations resulting in crystalline hydroxyapatite (HA), tricalcium phosphate (TCP) and biphasic compositions: HA/TCP and TCP/calcium pyrophosphate (CPP) and their subsequent densification. Phase composition of microwave sintered compacts was confirmed via X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR). Solution pH during crystal growth was found to have a profound effect on particle morphology and post-sintered phases, despite constant sintering temperature. Cytocompatibility assessment using 7F2 cells, corresponding to adult mouse osteoblasts, on microwave and conventional, furnace sintered samples demonstrated that manufacturing method does not impact cellular viability after 24 h or proliferation over 7 days. New CaP deposition and extracellular matrix components were observed in vitro via scanning electron microscopy (SEM)., (Copyright © 2012 Elsevier B.V. All rights reserved.)

For several decades, composites made of polylactic acid-calcium phosphates (PLA-CaP) and polylactic acid-co-glycolic acid-calcium phosphates (PLGA-CaP) have seen widespread uses in orthopedic applications. This paper reviews the fabrication aspects of these composites, following the ubiquitous materials science approach by studying "processing-structure-property" correlations. Various fabrication processes such as microencapsulation, phase separation, electrospinning, supercritical gas foaming, etc., are reviewed, with specific examples of their applications in fabricating these composites. The effect of the incorporation of CaP materials on the mechanical and biological performance of PLA/PLGA is addressed. In addition, this paper describes the state of the art on challenges and innovations concerning CaP dispersion, incorporation of biomolecules/stem cells and long-term degradation of the composites., (Copyright © 2012 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)