Search

The prime aim of this research is to discover new, eco-friendly approaches to reducing agents for manufacturing silver nanoparticles (AgNPs) from fresh fruiting bodies of the edible mushroom Hypsizygus ulmarius (Hu). The confirmation of Hu-mediated AgNPs has been characterized by UV visible spectroscopy, XRD, FTIR, SEM with EDX, HRTEM, AFM, PSA, Zeta poetical and GCMS analysis. The absorption peak of Hu-AgNPs at 430 nm has been confirmed by UV-visible spectroscopy analysis. The findings of the particle size study show that AgNPs have a size distribution with an average of 20 nm. The Zeta potential of NPs reveals a significant build-up of negative charges on their surface. The additional hydrate layers that occurred at the surface of AgNPs are shown in the HR-TEM morphology images. The antibacterial activity results showed that Hu-AgNPs were highly effective against both bacterial pathogens, with gram-positive (+) and gram-negative (-) pathogens having a moderate inhibition effect on K. pneumoniae (5.3 ± 0.3 mm), E. coli (5.3 ± 0.1), and S. aureus (5.2 ± 0.3 mm). Hu-AgNPs (IC 50 of 50.78 μg/mL) were found to have dose-dependent cytotoxic action against human lung cancer cell lines (A549). Inhibited cell viability by up to 64.31% after 24 h of treatment. To the best of our knowledge, this is the hand information on the myco-synthesis of AgNPs from the H. ulmarius mushroom extract and the results suggest that it can an excellent source for developing a multipurpose and eco-friendly nano product in future., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Inc. All rights reserved.)

Aim of the Study: The aim of this laboratory study was to evaluate the effect of ethanol treatment on the surface roughness (S a ), nano-mechanical properties (NMP) and surface characterization of dental fiber reinforced composite (FRC) with semi-interpenetrating polymer network (IPN)., Materials and Methods: A total of 240 FRC specimens with bisphenol A-glycidyl methacrylate - triethyleneglycol dimethacrylate - Poly (methylmetahcrylate) (bis-GMA-TEGDMA-PMMA) IPN matrix system were light cured for 40 s and divided into 2 groups (L and LH). The group LH was further post-cured by heat at 95 °C for 25 min. The specimens were exposed to 99.9%, 70% and 40% for 15, 30, 60 and 120 s respectively. The treated specimens were evaluated for S a using non-contact profilometer. NMP were determined using nanoindentation technique and chemical characterization was assessed by Fourier Transform-Infrared (FTIR) spectroscopic analyses. Scanning electron microscopic (SEM) images were made to evaluate the surface topographical changes., Results: Both the L and LH group showed changes in the S a and NMP after being treated by different concentrations of ethanol and at different time interval. The highest S a was observed with L-group (0.733 μm) treated with 99.9% ethanol for 120 s. Specimens in LH-group treated with 99.9% ethanol for 120 s (1.91 GPa) demonstrated increased nano-hardness, and group treated with 40% ethanol for 120 s demonstrated increased Young's modulus of elasticity (22.90 GPa). FTIR analyses revealed changes in the intensity and bandwidth in both the L and LH groups., Conclusion: The present study demonstrated that both light-cured and heat post-cured FRC were prone for ethanol induced alteration in the surface roughness (S a ), nano-mechanical properties (NMP) and chemical characterization. The interphase between the glass fibers and the organic matrix was affected by ethanol. The changes were considerably less in magnitude in the heat post-cured FRC specimens., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

Aim of the Study: The aim of this study was to evaluate the effect of solvent/disinfectant ethanol on the surface of denture base polymers. Changes in surface roughness, topography and some nanomechanical properties were assessed by SEM and nanoindentation plotted against different concentrations of ethanol on heat cured and autopolymerized polymetyl methacrylate based acrylic denture base polymers., Materials and Methods: Test specimens (10×10×3mm(3)) of heat-curing (HC) and auto-polymerizing (AP) acrylic resin were prepared and polished to obtain uniform smoothness which were further grouped into 3 sub-groups HC1, HC2, HC3 and AP1, AP2, AP3 respectively 10 specimens (n) in each group. HC1 and AP1, HC2 and AP2, HC3 and AP3 were treated with 99.9%, 70% and 40% respectively for 30, 60 and 120s followed by analysis of surface roughness (Sa), topographical changes and some nanomechanical properties., Results: Both HC and AP resins showed changes in their Sa and nanomechanically measured modulus of elasticity and surface hardness after being treated at different concentrations of ethanol and at different lengths of time. Surface changes were most clearly seen in autopolymerizing denture base polymer, especially at the interface region between the PMMA polymer bead and polymer matrix. There was a correlation (R2=0.83, r=0.91, P<0.001) between the time of treatment by ethanol and thickness of the affected area of denture base polymer., Conclusion: The present study demonstrated that denture base polymers, especially autopolymerized denture base polymer is prone for surface crazing and dissolving by solvent/disinfectant ethanol. The interphase region between the PMMA polymer bead and the polymer matrix was most affected by the ethanol., (Copyright © 2015 Elsevier Ltd. All rights reserved.)