Search

A nanocomposite of tannic acid and cellulose nanowhiskers (CNW)-reinforced polysulfone (PSF) was used to develop a metallochromic nanofibrous membrane sensor for iron(III) in aqueous media. Tannic acid was used as an active detecting probe, whereas the CNW@PSF composite was employed as a hosting material. Cellulose nanowhiskers (7-12 nm) were obtained from microcrystalline cellulose (MCC). According to the coloration parameters, a bathochromic shift from colorless (415 nm) to purple (561 nm) occurs when ferric cations bind to the phenolic hydroxyls of the tannic acid probe. The concentration of ferric was found to be directly correlated to the extent of the color change, demonstrating a detection limit of 0.1-250 ppm. This could be attributed to the creation of a coordinative complex between ferric ions and phenolic tannic acid. The generated nanofibers were inspected by energy-dispersive X-ray (EDX) and scanning electron microscopy (SEM). The electrospun nanofibrous membrane showed an average diameter between 75 and 150 nm. The tannic acid-containing nanofibers are remarkably reusable and simple. The tannic acid-encapsulated polysulfone nanofibrous membrane was used to detect various metal ions, demonstrating a high selectivity for Fe 3+ . The ideal pH range for the identification of Fe 3+ was determined to be in the range of 4.25-6.75., Competing Interests: Declaration of competing interest The authors declare that they have no competing interests., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The colorless and odorless nerve agents can cause paralysis and even death. The development of novel composite-based microporous strips has allowed for the rapid and visual detection of diisopropyl phosphorofluoridate (DIPF) nerve agent mimics. The active methyl-containing tricyanofuran and 4-aminobenzotrifluoride diazonium salt were azo-coupled in a straightforward manner to produce a new benzotrifluoride (BFT)-comprising tricyanofuran (TCF) hydrazone colorimetric probe. The molecular structure of the benzotrifluoride-bearing hydrazone (BFTH) was explored by different spectroscopic techniques. Microfibrillated cellulose (MFC) was produced using a green process from sugarcane bagasse, an agriculture waste that is notorious for being a solid pollution. Consequently, discovering a straightforward procedure to convert bagasse into valuable materials has been of utmost importance. MFC displayed diameters of 0.25-2 μm, whereas the sensory films exhibited pore diameters of 0.5-2.25 μm. Various quantities of the BFTH chromophore were used to create benzotrifluoride-bearing hydrazone/microfibrillated cellulose/carboxymethyl cellulose (BFTH/MFC@CMC) composites. The absorbance band of the hydrazone-immobilized composite increased from 435 nm to 580 nm as the content of DIPF was raised. When exposed to DIPF, the dipstick color shifted from orange to pink, according to the CIE Lab measurements. The sensor strip showed a detection limit to DIPF between 5 and 200 ppm., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Smart packaging materials have been used to protect human health from environmental hazards by sending real-time colorimetric signals for changes in the food packaging environment. However, the colorimetric material sensors use synthetic sensor dyes, which are toxic, expensive, non-biodegradable, and difficult to prepare. Herein, a simple strategy is presented for the development of an environmentally-friendly halochromic wood able to change color upon exposure to spoilage of food. A combination of anthocyanin (Ac)/aluminum (Al) mordant (Ac/Al) nanoparticles and cellulose nanowhiskers (CNW)-reinforced polyvinyl alcohol (PVA) was infiltrated into a delignified wood to produce a translucent wood with halochromic properties. CNW were employed as reinforcement agent to improve the mechanical performance of PVA. Additionally, CNW function as a dispersing agent to prevent agglomeration of Ac/Al nanoparticles. The diameters of CNW are in the range of 12-19 nm, whereas Ac/Al particles showed diameters of 9-22 nm. The smart wood changed color from purplish to colorless when exposed to food spoilage. A hypsochromic change from 539 nm to 370 nm was shown by the anthocyanin receptor when the spoilage level of food increased. This could be attributed to the pH-driven molecular switching of anthocyanin, leading to charge delocalization., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Smart polymer glue with photoluminescence and water-repellent properties was developed. The luminescent adhesive continues emitting light for up to 120 min after turning the excitation source off. Nanoparticles of lanthanide strontium aluminum oxide (LSAO) (8-13 nm) were consistently immobilized into carboxymethyl cellulose-reinforced gum Arabic (CMC/GA) adhesive. Using various concentrations of LSAO, the generated adhesives showed emission intensity at 519 nm and an excitation band at 365 nm. Depending on LSAO content, both of afterglow and fluorescence emission were monitored. Photochromism was detected as the transparent adhesive film changes color to green under ultraviolet irradiation. A greenish-yellow lightening in a darkened place was also observed. The nanocomposite resistance to scratches and hydrophobicity were found to enhance as the LSAO content was increased in the carboxymethyl cellulose-reinforced gum Arabic matrix. The LSAO@CMC/GA nanocomposite showed high durability and photostability. The present strategy proved the viability of a potential mass production toward photoluminescent adhesives for various smart applications, such as smart packaging, anti-counterfeiting printing, smart windows, and safety signs., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Multifunctional transparent woods have recently attracted a great interest as efficient products for many applications, such as smart window and smart packaging. Herein, a transparent wood with several desirable properties, including flame-retardant activity, ultraviolet shielding, superhydrophobicity, good roughness, durability and photostability was developed. The current photoluminescent wood showed a remarkable capacity to keep releasing light in the dark for extended durations. Multifunctional transparent wood was prepared by infiltrating a delignified wooden bulk with a combination of polyvinyl alcohol (PVA), ammonium polyphosphate (APP), cellulose nanocrystals, and rare-earth strontium aluminate nanoparticles (RSAN). Cellulose nanocrystals were prepared from microcrystalline cellulose, and used as reinforcement nanofiller to enhance the mechanical strength of the polyvinyl alcohol matrix and a dispersant agent to avoid agglomeration of RSAN. RSAN displayed diameters of 8-16 nm, while cellulose nanocrystals displayed lengths of 75-150 nm and diameters of 5-10 nm. According to photoluminescence spectra and the colorimetric space coordinates reported by the CIE Lab parameters, the transparent wood changed color to bright green when exposed to UV irradiation. For the produced phosphorescent wood surfaces, an absorption band was detected at 365 nm to generate an emission band at 519 nm., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The colorless ammonia gas has been a significant intermediate in the industrial sector. However, prolonged exposure to ammonia causes harmful effects to organs or even death. Herein, an environmentally friendly solid-state ammonia sensor was developed utilizing colorimetric polycaprolactone-co-polylactic acid nanofibrous membrane. Pomegranate (Punica granatum L.) peel contains anthocyanin (ACN) as a naturally occurring spectroscopic probe. A mordant (potassium aluminum sulfate) is used to immobilize the anthocyanin direct dyestuff inside nanofibers, generating mordant/anthocyanin (M/ACN) coordinated complex nanoparticles. When exposed to ammonia, the color change of anthocyanin-encapsulated polycaprolactone-co-polylactic acid nanofibrous membrane from purple to transparent was examined by absorbance spectra and CIE Lab color parameters. With a quick colorimetric shift, the polycaprolactone-co-polylactic acid fabric exhibits a detection limit of 5-150 mg/L. The absorbance spectra showed a hypsochromic shift when exposed to ammonia, displaying an absorption shift from 559 nm to 391 nm with an isosbestic point of 448 nm. Scanning electron microscopy (SEM) images revealed that the polycaprolactone-co-polylactic acid nanofibers had a diameter of 75-125 nm, whereas transmission electron microscopy (TEM) images revealed that M/ACN nanoparticles exhibited diameters of 10-20 nm., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

An inorganic/organic nanocomposite was used to develop an afterglow and color-tunable smart window. A combination of polylactic acid (PLA) plastic waste as an environmentally-friendly hosting agent, and lanthanide-activated strontium aluminum oxide nanoparticles (SAON) encapsulated with silica nanoparticles (SAON@Silica) as a photoluminescent efficient agent resulted in a smart organic/inorganic nanocomposite. In order to prepare SAON-encapsulated silica nanoparticles (SAON@Silica), the SAON nanoparticles were coated with silica using the heterogeneous precipitation method. By using transmission electron microscopy (TEM), SAON showed a diameter range of 5-12 nm, while the SAON@Silica nanoparticles showed a diameter range of 50-100 nm. In order to ensure the development of a colorless plastic film, a homogeneous dispersion of the phosphorescent Phosphor@Silica nanoparticles throughout the plastic bulk was confirmed. CIE Lab coordinates and luminescence spectra were used to study the color shift characteristics. Under visible light conditions, the plastic films were transparent. The photoluminescent films emitted green light at 525 nm when excited at 375 nm. The hydrophobicity and ultraviolet protection were enhanced without altering the fundamental physico-mechanical performance of the plastic sheet. The current color-tunable plastic can be used in many potential applications, such as warning signs, anti-counterfeiting barcodes, smart windows, and protective apparel., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

It is generally believed that the most challenging impediment for the utilization of cellulose acetate (CA) in the medical field is its hydrophobicity and disability to poison the harmful microbes. Therefore, in this contribution, we aimed to prepare an environmentally scaffold-based CA loaded with copper nanoparticles (CuONPs), which are expected to not only improve the hydrophilicity of the prepared nanofibers, but also have an effective ability to kill such harmful and infectious microbes that are abundant in wounds. The obtained results attested that the generated nanofibers became thicker with increasing the content of CuONPs in CA nanofibers. The roughness average increased from 143.2 to 157.1 nm, whereas the maximum height of the roughness (R t ) increased from 400.8 to 479.9 nm as going from the lowest to the highest content of CuONPs. Additionally, the contact angle of the prepared nanofibers decreased from 105.3° (CA alone) to 85.4° for CuONPs@CA. Significantly, biological studies revealed that cell viability and anti-bacterial potency were improved upon incorporating CuONPs into CA solution. Correspondingly, their inhibition zones reached 18 ± 3 mm, and 16 ± 2 mm for nanofibrous scaffolds having 12.0CuO@CA, besides raising the cell viability from 91.3 ± 4% to 96.4 ± 4% for 0.0CuO@CA, and 12.0CuO@CA, respectively, thereby implying that the fabricated CuONPs@CA nanocomposite has biocompatibility towards fibroblast cells. Thus, introducing biological activity into CA nanofibers via loading with CuONPs makes it suitable for numerous biomedical applications, particularly as an environmentally benign wound dressing fibers., (Copyright © 2021. Published by Elsevier B.V.)