Search

Electrically conductive hydrogels have attracted enormous attention due to the rapid development of flexible electronics. In this paper, the application of layered double hydroxides (LDHs) in the field of conductive hydrogel for strain sensing is firstly explored. LDHs are introduced to the polyacrylamide (PAM)/starch (St) semi-interpenetrating network (SIPN) to fabricate conductive PAM/St/LDHs (PSL) hydrogels for strain sensing applications. The results show that LDHs incorporated into PAM/St SIPN as inorganic nano fillers not only improve the mechanical strength, but also innovatively endow the hydrogel with electrical conductivity properties. The PSL hydrogels exhibit excellent mechanical properties (with an elongation strain of 1750 % and a fracture strength of 0.22 MPa) and decent sensing properties (with a gauge factor of 2.73). As a proof of concept, an 8*8 sensing array based on PSL hydrogels is designed to realize the visualization of pressure sensing, demonstrating the broad prospect of PSL hydrogels in applications of human-computer interaction, flexible wearable and soft robotics., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Agro-industrial wastes and by-products are the natural and abundant resources of biomaterials to obtain various value-added items such as biopolymer films, bio-composites and enzymes. This study presents a way to fractionate and to convert an agro-industrial residue, sugarcane bagasse (SB), into useful materials with potential applications. Initially cellulose was extracted from SB which was then converted into methylcellulose. The synthesized methylcellulose was characterized by scanning electron microscopy and FTIR. Biopolymer film was prepared by using methylcellulose, polyvinyl alcohol (PVA), glutaraldehyde, starch and glycerol. The biopolymer was characterized to exhibit 16.30 MPa tensile strength, 0.05 g/m 2  h of water vapor transmission rate, 366 % of water absorption to its original weight after 115 min of immersion, 59.08 % water solubility, 99.05 % moisture retention capability and 6.01 % of moisture absorption after 144 h. Furthermore, in vitro studies on absorption and dissolution of model drug by biopolymer showed 2.04 and 104.59 % of swelling ratio and equilibrium water content, respectively. Biocompatibility of the biopolymer was checked by using gelatin media and it was observed that swelling ratio was higher in initial 20 min of contact. The extracted hemicellulose and pectin from SB were fermented by a thermophilic bacterial strain, Neobacillus sedimentimangrovi UE25 that yielded 12.52 and 6.4 IU mL -1 of xylanase and pectinase, respectively. These industrially important enzymes further augmented the utility of SB in this study. Therefore, this study emphasizes the possibility for industrial application of SB to form various products., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Rozina Rashid reports financial support was provided by Higher Education Commission Pakistan. The financial support from Taif University Researchers Supporting Project is also declared., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Mechanically-robust nanocomposite membranes have been developed via crosslinking chemistry and electrospinning technique based on the rational selection of dispersed phase materials with high Young's modulus (i.e., graphene and multiwalled carbon nanotubes) and Cassie-Baxter design and used for oil and water separation. Proper selection of dispersed phase materials can enhance the stiffness of nanocomposite fiber membranes while their length has to be larger than their critical length. Chemical modification of the dispersed phase materials with fluorochemcials and their induced roughness were critical to achieve superhydrophobocity. Surface analytic tools including goniometer, X-ray photoelectron spectroscopy (XPS), Fourier transform infrared (FTIR) spectroscopy, Raman spectroscopy, atomic force microscopy (AFM) and scanning electron microscope (SEM) were applied to characterize the superhydrophobic nanocomposite membranes. An AFM-based nanoindentation technique was used to measure quantitativly the stiffness of the nanocomposite membranes for local region and whole composites, compared with the results by a tensile test technique. Thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) techniques were used to confirm composition and formation of nanocomposite membranes. These membranes demonstrated excellent oil/water separation. This work has potential application in the field of water purification and remediation., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Authors. Published by Elsevier Inc. All rights reserved.)

Polycarboxylate (PCE) is a high performance superplasticizer for modern concrete. With the high quality sand becoming precious, more and more low quality sands are used in concrete. However, low quality sands generally contain a relatively high content of montmorillonite (MMT), which could seriously reduce the efficiency of PCE. In order to develop PCE suitable for concrete with low quality sands, the absorption behavior on MMT of PCE with different side chains and acid/ether ratio was investigated. In order to explore the effect of MMT on PCE, two macromonomers were selected, isoprene glycol ether 400(TPEG400) and isoprene glycol ether 2400 (TPEG2400), to synthesize six long and short side chain comb-type PCEs with acid-ether ratios of 1.5:1, 2.5:1 and 3.5:1, respectively. The MMT tolerance mechanism of comb-type PCE in MMT-containing cement slurry was examined by FT-IR, DLS, TOC and other analysis. The PCE with long side chain is much easier to be inserted into the layered structure of MMT, resulting in intercalation absorption. The absorption amount of two kinds of side chain PCE on the MMT particles decreased as the acid ether ratio increases. PCE with long side chains showed shear-thickening properties in MMT-containing cement slurry, on the contrary, short side chains showed shear-thinning properties., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier Inc. All rights reserved.)