Search

Objective: To test the null hypothesis that when the equivalent total light energy is irradiated to three orthodontic adhesive resins, there is no difference between the microhardness and water sorption values regardless of the curing light sources., Materials and Methods: Samples were divided into six groups according to the combination of three orthodontic adhesives (Kurasper F, Light-Bond, Transbond XT) and two light intensities (quartz tungsten halogen [QTH] and high intensity quartz tungsten halogen [HQTH]). One half of each of the 40 samples of three adhesive pastes was polymerized for 20 seconds by a QTH light source, and the other half was polymerized for 10 seconds by a HQTH light source. Water sorption was determined and Vickers hardness was established with three measurements per sample at the top, center, and bottom. Statistical analysis was performed using two-way analysis of variance (ANOVA) with multiple comparisons (Tukey-HSD)., Results: Statistically significant differences were found among all adhesives for water sorption and hardness values cured with QTH and HQTH. The HQTH curing unit resulted in higher values than did the QTH. The highest water sorption values were observed for Kurasper F cured with HQTH and the lowest value was observed for Transbond XT cured with QTH. For microhardness Light-Bond cured with HQTH produced the highest values, and Transbond XT cured with QTH produced the lowest., Conclusions: When the equivalent total light energy is irradiated to three orthodontic adhesive resins, there are significant differences between the microhardness and water sorption values cured with the QTH and HQTH light source. The null hypothesis is rejected.

The objectives of this study were to compare the polymerization shrinkage of three orthodontic adhesives. In addition we wanted to determine the effectiveness of the high-intensity quartz tungsten halogen (HQTH) in curing orthodontic adhesives on polymerization shrinkage with that of the quartz tungsten halogen (QTH). A total of 120 glass ring molds were prepared using a low-speed saw. The internal surface of the glass rings were roughened and etched. Adhesive pastes were placed into the glass molds, which were sandwiched between two glass slides. Samples were divided into six groups according to the combination of three orthodontic adhesives (Kurasper F, Light Bond, and Transbond XT) and two light intensities. One half of each 40 samples of three adhesive pastes was polymerized for 20 seconds by a QTH (Hilux 350), and the other half was polymerized for 10 seconds by a HQTH (Optilux 501). The volumetric polymerization shrinkage for each system was measured through the specific density method modified by Puckett and Smith. Statistical analysis was performed using two-way analysis of variance for intergroup comparisons. The HQTH-curing unit resulted in a more polymerization shrinkage than did the QTH for all investigated adhesives. However, no statistically significant differences were found. The highest shrinkage was observed for Light Bond cured with HQTH (1.59 +/- 0.82%), and the lowest value was observed for Transbond XT cured with QTH (1.23 +/- 0.60%). There are no significant differences in polymerization shrinkage of the three investigated orthodontic adhesives when polymerized with a QTH or a HQTH.

The purpose of this study was to determine whether the application of two antibacterial mouth rinses to etched and unetched enamel affects the shear bond strength (SBS) of an orthodontic composite resin. Eighty-five lower human incisors were divided into five groups, ie, group 1: control group, no mouth rinse was used; groups 2 and 3: mouth rinses were applied to the intact enamel surface before etching; groups 4 and 5: mouth rinses were applied to the etched enamel. A bonding agent and a composite resin were applied to the teeth surface. For shear bond testing, the specimens were mounted in a universal testing machine, and an apparatus attached to a compression load cell was applied to each specimen until failure occurred. The data were analyzed using analysis of variance and Tukey honestly significance tests. Fracture modes were analyzed by Mann-Whitney U-test. There was no statistically significant difference between the SBS values of group 1 (31.64 +/- 3.62 MPa) and group 4-five experimental applications (P > or = .05). However, the SBS value of group 3 (36.56 +/- 5.95 MPa) was significantly larger than those of group 4 (30.00 +/- 4.97 MPa) and group 5 (30.26 +/- 7.30 MPa). In addition, no significant differences were observed between group 1 and groups 2 (34.33 +/- 7.26 MPa) and 3 (36.56 +/- 5.95 MPa) (P > or = .05). Because the application of chlorhexidine and povidone-iodine before acid etching did not cause any decrease in bond strength, it is advisable for use under the orthodontic resin composite to obtain an antibacterial effect or to prevent the risk of bacteremia.