Search

LHCb is one of the 4 experiments at the LHC accelerator at CERN. During the upgrade phase of the experiment, several new electronic boards and Front End chips that perform the data acquisition for the experiment will be added by the different sub-detectors. These new devices will be controlled and monitored via a system composed of GigaBit Transceiver (GBT) chips that manage the bi-directional slow control traffic to the Slow Control Adapter(s) (SCA) chips. The SCA chips provide multiple field buses to interface the new electronics devices (I2C, GPIO, etc). These devices will need to be integrated in the Experiment Control System (ECS) that drives LHCb. A set of tools was developed that provide an easy integration of the control and monitoring of the devices in the ECS. A server (GbtServ) provides the low level communication layer with the devices via the several user buses in the GBT-SCA chip and exposes an interface for control to the experiment SCADA (WinCC OA), the fwGbt component provides the interface between the SCADA and the GbtServ and the fwHw component, a tool that allows the abstraction of the devices models into the ECS. Using the graphical User Interfaces or XML files describing the structure and registers of the devices it creates the necessary model of the hardware as a data structure in the SCADA. It allows then the control and monitoring of the defined registers using their name, without the need to know the details of the hardware behind. The fwHw tool also provides the facility of defining and applying recipes named sets of configurations which can be used to easily configure the hardware according to specific needs.

LHCb is one of the 4 experiments at the LHC accelerator at CERN, specialized in B-physics. During the next long shutdown period, the LHCb experiment will be upgraded to a trigger-less readout system with a full software trigger in order to be able to record data with a much higher instantaneous luminosity. To achieve this goal, the upgraded systems for Timing and Fast Control (TFC) and Data Acquisition (DAQ) will have new electronic boards and a new software stack will be introduced for data acquisition. In the development stage, all these components are housed in servers named MiniDAQ. These new components will need to be integrated in an upgraded Experiment Control System (ECS) based on the WinCC OA SCADA and the CERN JCOP framework. The ECS provides full monitoring and control for all these subsystems and many important features like configuration recipes and automated actions. This paper describes the implementation of the upgraded ECS and its component fwMiniDAQ, which integrates all the new developments and can be easily distributed to the sub-detector developers and configured for their various setups.

LHCb is one of the 4 LHC experiments and continues to revolutionise data acquisition and analysis techniques. Already two years ago the concepts of “online” and “offline” analysis were unified: the calibration and alignment processes take place automatically in real time and are used in the triggering process such that Online data are immediately available offline for physics analysis (Turbo analysis), the computing capacity of the HLT farm has been used simultaneously for different workflows : synchronous first level trigger, asynchronous second level trigger, and Monte-Carlo simulation. Thanks to the same software environment, LHCb can switch seamlessly and fast from Online to Offline workflows, run them simultaneously and thus maximize the usage of the HLT farm computing resources.