Search

The current study is devoted to simulating cuttings transport by drilling fluid through a horizontal section of borehole with an annular cross section. Drill pipe rotates in fixed eccentric position. Steady-state flow is considered. Cuttings are rigid spheres with equal diameters. The carrying fluid is drilling mud with Herschel-Bulkley rheology. Suspension rheology depends on local shear rate and particles concentration. Continuous mixture model with algebraic equation for particles slipping velocity is used. Two hydrodynamic regimes are considered: axial flow without drill pipe rotation and with drill pipe rotation. In the case of axial flow was shown that increasing of power index n and consistency factor k increases pressure gradient and decreases cuttings concentration. Increasing of yield stress leads to increasing of pressure gradient and cuttings concentration. Cuttings concentration achieves constant value for high yield stress and not depends on it. Rotation of the drill pipe significantly changes the flow structure: pressure loss occurs and particles concentration decreases in the cross section. Two basic regimes of rotational flow are observed: domination of primary vortex around drill pipe and domination secondary vorticity structures. Transition between regimes leads to significant changes of flow integral parameters.

The article describes the concept of the methodology of intellectual labor automation, a formal description of the conceptual model (CM) at the object level, and also a description of the analytical processing of CM. The conceptual model is the basis for the design of the system. The conceptual model of an applied task reflects the semantics (the system of knowledge) of the subject field in the form of static and dynamic structures and their linkage. The elements of the static structure are subject categories defined by classes: cycle, process, task, component, object, feature, value. The dynamic structure reflects the system of subject dependences which describes the process of performing a subject task. The main stage of conceptual model analytical processing is the restructuring of the dynamic component. The method and technique of descriptions restructuring of subject dependences system at the level of features are developed. The method allows to provide reduction of time and spatial expenses on performance of process of the decision of the applied task in the computing environment at early stages of information-active systems design

This paper overviews and analyzes progressive trends in modern data center, and existing solutions to build the distributed cloud data center. Authors present the hierarchical distributed agent-based control plane architecture to build a web-scale control layer based on software-defined domains. The goal of this approach is to design the simple extensible agent that could be used for any management purposes, just by adding some specific code. Using of this approach makes easier the scalability and increases the efficiency of the management of a multi-site environment. There are five main use-cases of using this approach: distributed cloud, hybrid cloud, hyperscale data center, IoT, Continuous Integration.

Results of unsteady two-dimensional numerical simulations for the turbulent flow over the semi-cylindrical profile at Reynolds number 45000 are presented. Three different turbulence RANS eddy viscosity models are used for the simulation. The calculations show the formation of alternating large-scale vortices shed in the wake of the body. The calculated averaged pressure distribution on the contour demonstrate a good agreement with the experimental data. A series of calculations have been performed for the estimation of influence of mesh resolution in the wake of streamlined body on the unsteady solution accuracy. It was found that a mesh size ~0.04 of chord length is sufficient to resolve the vortex street.