Search

The article offers information on Beamex's enhanced services, including the Health Check audit for optimizing metrology processes and the Hypercare support for personalized post-implementation guidance, aimed at improving calibration management and operational efficiency.

The article offers information on the LCB50 multifunction basic temperature calibrator from Wimesure.

The article informs on a technical day organized by the French College of Metrology on the optimization of calibration periodicities on September 20, 2022. It mentions that Bernard Larquier, commercial and strategic director at BEA Métrologie presented the concept of optimization and some associated methods, and extending the calibration periodicity of certain equipment while implementing monitoring processes.

The article presents the discussion on aerospace and cosmetic industries, offering on-the-ground analyses of the implementation of these optimization methods. Topics include optimization of calibration intervals is a critical aspect of metrology, influencing the efficiency and precision of measurement processes across diverse industries; and contributed to a comprehensive understanding of the challenges and opportunities associated with calibration interval optimization.

The article discusses business performance of Trescal. It mentions Trescal group is to be as close as possible to its customers to best meet their expectations, and this in many areas: verification, calibration and repair of measuring instruments; expertise for setting up and acquiring measurement systems.

The article offers information on the MC6 calibrators from Beamex.

The article offers information on the HygroGen2, a portable device for calibrating hygrometers, from Process Sensing Technologies.

Information on the technical day organized by metrology association Collège de français de métrologie (CFM) that was held in Paris, France is presented. Topics discussed include calibration intervals, company's competitiveness, monitoring of measurement processes, transparency in enterprise resource planning (ERP).

The article informs on Digital Certification Calibration (DCC). It mentions that DCC contains information that is readable and interpretable by machines, and creation and processing of DCCs can be carried out with a high degree of automation and thus meet the challenges of Industry 4.0. knowledge of the calibration data and to be able to use and process them otherwise.

The article offers information on Maximum Permissible Error (MTE). It mentions that measurement error is the difference between the measured value of a quantity and a reference value, and the concept of error can be hen there is a single reference value to refer to, which occurs if a calibration is carried out using a standard whose measured value has an uncertainty of negligible measurement or if a conventional value is taken, the error then being known.

The article offers information on a technical day organized by the Collège de français de Métrologie in Lyon, France on February 12, 2020. Topics discussed inlcude optimized calibration intervals, its economic aspects, its role in connecting measuring instruments, their reclassification and cost of metrology.

The article reports that on December 3, 2019, the French College of Metrology (CFM) organized its last technical day of 2019 in Paris, France, in collaboration with Zeiss on the theme "Tomography and RX technologies for measurement." It included speakers from Zeiss, experts in the field, a representative of the company Volume Graphics, specialized in the processing of tomographic images, industrial experience feedback from two companies using the technology.

The article reports that on November 7, 2019, the French College of Metrology organized a technical day in Paris on the subject of calibration and verification with a program defined in collaboration with Patrick Leblois of Comma Consulting. The quality and reliability of measurements are based on mastery of the entire measurement process: measurement instrument, environment in which it is used, competence of the personnel, measurement method and object subject to measurement.

The article offers a preview of the "Analytics Dashboard", a tool designed for visualizing key metrological performance indicators, optimizing calibration frequencies, from Beamex.

The article offers a preview of the "AP-12.5Y", an innovative multi-channel pipette calibration system designed by Radwag.

The article analyze a calibration process by establishing an uncertainty balance. It mentions this analysis can be carried out using the so-called 5 M method, the different components are expressed using standard uncertainty or their square. It also mentions this factor is expressed differently at each measurement, and temperature, for a dimensional measurement, also induces a random error.

The article proposes an example of how to apply inference in the context of the calibration of a standard smooth ring. It is said that the more years go by, the more calibration results are piling up. While metrologists are sensitized, uncertainties of measurement arise. While they know that there is measurement uncertainty, they insist on relying exclusively on the latest available value.

The article offers information on the TP calibrator range for automatic calibration by camera temperature sensors from Sika France.

The article focuses on training solutions provided by the software firm Deltamu in the evolution of metrology. It highlights the skills and operational efficiency of trainers in training organizations for the metrology. It discusses the several aspects of practical trainings which include the fundamentals and good practices of metrology, calibration procedures and measurement system analysis (MSA), as of February 2021.

A review is presented of Cofrac calibrator from Etalonair.

The article focuses on new service contract from Hottinger Brüel & Kjaer for calibration.

The article focuses on Centrical calibration bench from Beamex.

The article offers information on a technical day organized by the Collège de français de Métrologie in Lyon, France on February 12, 2020. Topics discussed inlcude optimized calibration intervals, its economic aspects, its role in connecting measuring instruments, their reclassification and cost of metrology.

A review is presented of HC3 and HC4 calibration benches for precise and fast verification from rimos.

The article reports that E+E Elektronik France welcomes its visitors in its new headquarters social at Sèvres, France and sales team doubled compared to 2020 and the current installation of a laboratory calibration.

The article discusses Hygrometry Checks and calibrations: what means to use? which includes partial pressure ratio water vapor on water vapor pressure saturated with humid air saturated at the same pressure and temperature, in other words the relative humidity, is measured by different techniques, mechanical hygrometer; hygrometer with variation of impedance.

The article discusses Calibration of loops temperature, which includes The use of a oven, temperature calibration bath takes time, but you have to think about the importance of testing all devices involved in taking a measurement given.

The article discusses Liquid flowmeter Cetiat innovates with two benches unique in France, which includes national domain reference for carrying out calibration flowmeters and water meters, the laboratory of Cetiat liquid flow measurement is the laboratory associated with LNE for maintenance and development of the stallion of "liquid flow".

The article discusses Process: Have confidence in your measurements, it's essential, which includes French College of Metrology hosted MSE fair of the Measurement Network, by organizing conferences techniques with Benoît Savanier and Jacques-Olivier Favreau from Cetiat on measurement uncertainties and measurements temperature, and Bernard Larquier, BEA Métrologie, on the optimization of calibration intervals.

The article discusses The Measurement Network in brief, which includes the Measurement Network is a association created in 2002 which currently has more than 180 member companies in the fields of measurement, control, calibration and the instrumentation.

The article presents the author's opinion on the use of thermometer for managing automation in temperature calibration processes. Topics discussed include accuracy of metrology instruments, calibration of temperature sensors, launch of Wika CTR3000 Multifunction Precision Thermometer and temperature measurement chains.

The article presents information on ISO / IEC 17025, a standard which defines the requirements of competence of testing laboratories and calibration. It informs that laboratories use this standard in order to develop a quality management system and organize their technical activities to produce valid results.

The article evaluates the Ralston FieldLab Instruments pressure calibrator by the Dimelco.

The article evaluates the Beamex CMX and the Beamex Logical software developed by the Beamex for automation of calibration process in metrology.

The article offers information on the efforts of the metrology laboratory Aerometrology to reduce the calibration time of equipment involved in anemometry, gas flow measurement and hygrometry under the accreditation of the COFRAC (Comite francais d'accreditation), as of February 2021.

The article reports that arometrology has lowered its uncertainties in calibrating Pt100 probes over the 250 degree centigrade to 420 degree centigrade.

The article evaluates MC6-T oven as a multifunctional calibrator offering a panel of unique features.

Information on the new portable and automatic pressure calibrator ADT761A from Additel Corp. is presented.

Information on the MC6-Ex, Atex Calibrator for pressure, temperature and several electrical signals is presented.

The article offers information on the Collège français de métrologie (CFM), a metrology institute focused on promoting the use of metrology in laboratories, academics and manufacturers. Topics discussed include annual progression of CFM, use of metrology and measurement in industrial processes, and calibration of periodicity.

The article evaluates the new all-in-one pressure calibrator Wika CPH7000 from Wika GmbH.

The article evaluates the new 35 ppm 9010 Lab Multifunction Calibrator.

The article presents the author's views on technological innovations in metrology. Topics discussed include calibration in metrology sector, standards of measurement processes, growth of quantum technologies, use of technology in telemedicine and remote surgery, robotization and shortage of technicians.