Search

Accurate vehicle localization in forest environments is still an unresolved problem. Global navigation satellite systems (GNSS) have well known limitations in dense forest, and have to be combined with for instance laser based SLAM algorithms to provide satisfying accuracy. Such algorithms typically require accurate detection of trees, and estimation of tree center locations in laser data. Both these operations depend on accurate estimations of tree trunk diameter. Diameter estimations are important also for several other forestry automation and remote sensing applications. This paper evaluates several existing algorithms for diameter estimation using 2D laser scanner data. Enhanced algorithms, compensating for beam width and using multiple scans, were also developed and evaluated. The best existing algorithms overestimated tree trunk diameter by ca. 40%. Our enhanced algorithms, compensating for laser beam width, reduced this error to less than 12%.

Accurate vehicle localization in forest environments is still an unresolved problem. Global navigation satellite systems (GNSS) have well known limitations in dense forest, and have to be combined with for instance laser based SLAM algorithms to provide satisfying accuracy. Such algorithms typically require accurate detection of trees, and estimation of tree center locations in laser data. Both these operations depend on accurate estimations of tree trunk diameter. Diameter estimations are important also for several other forestry automation and remote sensing applications. This paper evaluates several existing algorithms for diameter estimation using 2D laser scanner data. Enhanced algorithms, compensating for beam width and using multiple scans, were also developed and evaluated. The best existing algorithms overestimated tree trunk diameter by ca. 40%. Our enhanced algorithms, compensating for laser beam width, reduced this error to less than 12%.

Accurate vehicle localization in forest environments is still an unresolved problem. Global navigation satellite systems (GNSS) have well known limitations in dense forest, and have to be combined with for instance laser based SLAM algorithms to provide satisfying accuracy. Such algorithms typically require accurate detection of trees, and estimation of tree center locations in laser data. Both these operations depend on accurate estimations of tree trunk diameter. Diameter estimations are important also for several other forestry automation and remote sensing applications. This paper evaluates several existing algorithms for diameter estimation using 2D laser scanner data. Enhanced algorithms, compensating for beam width and using multiple scans, were also developed and evaluated. The best existing algorithms overestimated tree trunk diameter by ca. 40%. Our enhanced algorithms, compensating for laser beam width, reduced this error to less than 12%.

Accurate vehicle localization in forest environments is still an unresolved problem. Global navigation satellite systems (GNSS) have well known limitations in dense forest, and have to be combined with for instance laser based SLAM algorithms to provide satisfying accuracy. Such algorithms typically require accurate detection of trees, and estimation of tree center locations in laser data. Both these operations depend on accurate estimations of tree trunk diameter. Diameter estimations are important also for several other forestry automation and remote sensing applications. This paper evaluates several existing algorithms for diameter estimation using 2D laser scanner data. Enhanced algorithms, compensating for beam width and using multiple scans, were also developed and evaluated. The best existing algorithms overestimated tree trunk diameter by ca. 40%. Our enhanced algorithms, compensating for laser beam width, reduced this error to less than 12%.

Accurate vehicle localization in forest environments is still an unresolved problem. Global navigation satellite systems (GNSS) have well known limitations in dense forest, and have to be combined with for instance laser based SLAM algorithms to provide satisfying accuracy. Such algorithms typically require accurate detection of trees, and estimation of tree center locations in laser data. Both these operations depend on accurate estimations of tree trunk diameter. Diameter estimations are important also for several other forestry automation and remote sensing applications. This paper evaluates several existing algorithms for diameter estimation using 2D laser scanner data. Enhanced algorithms, compensating for beam width and using multiple scans, were also developed and evaluated. The best existing algorithms overestimated tree trunk diameter by ca. 40%. Our enhanced algorithms, compensating for laser beam width, reduced this error to less than 12%.

Accurate vehicle localization in forest environments is still an unresolved problem. Global navigation satellite systems (GNSS) have well known limitations in dense forest, and have to be combined with for instance laser based SLAM algorithms to provide satisfying accuracy. Such algorithms typically require accurate detection of trees, and estimation of tree center locations in laser data. Both these operations depend on accurate estimations of tree trunk diameter. Diameter estimations are important also for several other forestry automation and remote sensing applications. This paper evaluates several existing algorithms for diameter estimation using 2D laser scanner data. Enhanced algorithms, compensating for beam width and using multiple scans, were also developed and evaluated. The best existing algorithms overestimated tree trunk diameter by ca. 40%. Our enhanced algorithms, compensating for laser beam width, reduced this error to less than 12%.

Accurate vehicle localization in forest environments is still an unresolved problem. Global navigation satellite systems (GNSS) have well known limitations in dense forest, and have to be combined with for instance laser based SLAM algorithms to provide satisfying accuracy. Such algorithms typically require accurate detection of trees, and estimation of tree center locations in laser data. Both these operations depend on accurate estimations of tree trunk diameter. Diameter estimations are important also for several other forestry automation and remote sensing applications. This paper evaluates several existing algorithms for diameter estimation using 2D laser scanner data. Enhanced algorithms, compensating for beam width and using multiple scans, were also developed and evaluated. The best existing algorithms overestimated tree trunk diameter by ca. 40%. Our enhanced algorithms, compensating for laser beam width, reduced this error to less than 12%.

Wheel slip may increase the risk for wheel rutting and tear up ground vegetation and superficial roots and thereby decreasing the bearing capacity of the ground, but also reducing the growth of nearby standing forest trees. With increased slip, more energy is consumed for making wheel ruts in the ground, with increased fuel consumption as a result. This paper proposes a novel method for measuring slip in an uneven forest terrain with an 8WD forestry machine. This is done by comparing the wheel velocity reported by the machine and velocity measured with an accurate DGPS system. Field tests with a forestry machine showed that slip could be calculated accurately with the suggested method. The tests showed that there was almost no slip on asphalt or gravel surfaces. In a forest environment, 10–15% slip was common. A future extension of the method enabling estimation of the slip of each wheel pair in the bogies is also suggested.

In conventional mechanized cut-to-length systems, a harvester fells and cuts trees into logs that are stored on the ground until a forwarder picks them up and carries them to landing sites. A proposed improvement is to place logs directly into the load spaces of transporting machines as they are cut. Such integrated loading could result in cost reductions, shorter lead times from stump to landing, and lower fuel consumption. However, it might also create waiting times for the machines involved, whereas multifunctional machines are likely to be expensive. Thus, it is important to analyze whether or not the advantages of any changes outweigh the disadvantages. The conventional system was compared with four potential systems, including two with autonomous forwarders, using discrete-event simulation with stochastic elements in which harvests of more than 1000 final felling stands (containing in total 1.6 million m3) were simulated 35 times per system. The results indicate that harwarders have substantial potential (less expensive on ≥80% of the volume and fuel consumption decreased by ≥18%) and may become competitive if key innovations are developed. Systems with cooperating machines have considerably less potential, limited to very specific stand conditions. The results conform with expected difficulties in integrating processing and transporting machines’ work in variable environments., Included in thesis in manuscript form.

Wheel slip may increase the risk for wheel rutting and tear up ground vegetation and superficial roots and thereby decreasing the bearing capacity of the ground, but also reducing the growth of nearby standing forest trees. With increased slip, more energy is consumed for making wheel ruts in the ground, with increased fuel consumption as a result. This paper proposes a novel method for measuring slip in an uneven forest terrain with an 8WD forestry machine. This is done by comparing the wheel velocity reported by the machine and velocity measured with an accurate DGPS system. Field tests with a forestry machine showed that slip could be calculated accurately with the suggested method. The tests showed that there was almost no slip on asphalt or gravel surfaces. In a forest environment, 10–15% slip was common. A future extension of the method enabling estimation of the slip of each wheel pair in the bogies is also suggested.

In conventional mechanized cut-to-length systems, a harvester fells and cuts trees into logs that are stored on the ground until a forwarder picks them up and carries them to landing sites. A proposed improvement is to place logs directly into the load spaces of transporting machines as they are cut. Such integrated loading could result in cost reductions, shorter lead times from stump to landing, and lower fuel consumption. However, it might also create waiting times for the machines involved, whereas multifunctional machines are likely to be expensive. Thus, it is important to analyze whether or not the advantages of any changes outweigh the disadvantages. The conventional system was compared with four potential systems, including two with autonomous forwarders, using discrete-event simulation with stochastic elements in which harvests of more than 1000 final felling stands (containing in total 1.6 million m3) were simulated 35 times per system. The results indicate that harwarders have substantial potential (less expensive on ≥80% of the volume and fuel consumption decreased by ≥18%) and may become competitive if key innovations are developed. Systems with cooperating machines have considerably less potential, limited to very specific stand conditions. The results conform with expected difficulties in integrating processing and transporting machines’ work in variable environments., Included in thesis in manuscript form.

In conventional mechanized cut-to-length systems, a harvester fells and cuts trees into logs that are stored on the ground until a forwarder picks them up and carries them to landing sites. A proposed improvement is to place logs directly into the load spaces of transporting machines as they are cut. Such integrated loading could result in cost reductions, shorter lead times from stump to landing, and lower fuel consumption. However, it might also create waiting times for the machines involved, whereas multifunctional machines are likely to be expensive. Thus, it is important to analyze whether or not the advantages of any changes outweigh the disadvantages. The conventional system was compared with four potential systems, including two with autonomous forwarders, using discrete-event simulation with stochastic elements in which harvests of more than 1000 final felling stands (containing in total 1.6 million m3) were simulated 35 times per system. The results indicate that harwarders have substantial potential (less expensive on ≥80% of the volume and fuel consumption decreased by ≥18%) and may become competitive if key innovations are developed. Systems with cooperating machines have considerably less potential, limited to very specific stand conditions. The results conform with expected difficulties in integrating processing and transporting machines’ work in variable environments., Included in thesis in manuscript form.

Wheel slip may increase the risk for wheel rutting and tear up ground vegetation and superficial roots and thereby decreasing the bearing capacity of the ground, but also reducing the growth of nearby standing forest trees. With increased slip, more energy is consumed for making wheel ruts in the ground, with increased fuel consumption as a result. This paper proposes a novel method for measuring slip in an uneven forest terrain with an 8WD forestry machine. This is done by comparing the wheel velocity reported by the machine and velocity measured with an accurate DGPS system. Field tests with a forestry machine showed that slip could be calculated accurately with the suggested method. The tests showed that there was almost no slip on asphalt or gravel surfaces. In a forest environment, 10–15% slip was common. A future extension of the method enabling estimation of the slip of each wheel pair in the bogies is also suggested.

In conventional mechanized cut-to-length systems, a harvester fells and cuts trees into logs that are stored on the ground until a forwarder picks them up and carries them to landing sites. A proposed improvement is to place logs directly into the load spaces of transporting machines as they are cut. Such integrated loading could result in cost reductions, shorter lead times from stump to landing, and lower fuel consumption. However, it might also create waiting times for the machines involved, whereas multifunctional machines are likely to be expensive. Thus, it is important to analyze whether or not the advantages of any changes outweigh the disadvantages. The conventional system was compared with four potential systems, including two with autonomous forwarders, using discrete-event simulation with stochastic elements in which harvests of more than 1000 final felling stands (containing in total 1.6 million m3) were simulated 35 times per system. The results indicate that harwarders have substantial potential (less expensive on ≥80% of the volume and fuel consumption decreased by ≥18%) and may become competitive if key innovations are developed. Systems with cooperating machines have considerably less potential, limited to very specific stand conditions. The results conform with expected difficulties in integrating processing and transporting machines’ work in variable environments., Included in thesis in manuscript form.

Wheel slip may increase the risk for wheel rutting and tear up ground vegetation and superficial roots and thereby decreasing the bearing capacity of the ground, but also reducing the growth of nearby standing forest trees. With increased slip, more energy is consumed for making wheel ruts in the ground, with increased fuel consumption as a result. This paper proposes a novel method for measuring slip in an uneven forest terrain with an 8WD forestry machine. This is done by comparing the wheel velocity reported by the machine and velocity measured with an accurate DGPS system. Field tests with a forestry machine showed that slip could be calculated accurately with the suggested method. The tests showed that there was almost no slip on asphalt or gravel surfaces. In a forest environment, 10–15% slip was common. A future extension of the method enabling estimation of the slip of each wheel pair in the bogies is also suggested.

Wheel slip may increase the risk for wheel rutting and tear up ground vegetation and superficial roots and thereby decreasing the bearing capacity of the ground, but also reducing the growth of nearby standing forest trees. With increased slip, more energy is consumed for making wheel ruts in the ground, with increased fuel consumption as a result. This paper proposes a novel method for measuring slip in an uneven forest terrain with an 8WD forestry machine. This is done by comparing the wheel velocity reported by the machine and velocity measured with an accurate DGPS system. Field tests with a forestry machine showed that slip could be calculated accurately with the suggested method. The tests showed that there was almost no slip on asphalt or gravel surfaces. In a forest environment, 10–15% slip was common. A future extension of the method enabling estimation of the slip of each wheel pair in the bogies is also suggested.

In conventional mechanized cut-to-length systems, a harvester fells and cuts trees into logs that are stored on the ground until a forwarder picks them up and carries them to landing sites. A proposed improvement is to place logs directly into the load spaces of transporting machines as they are cut. Such integrated loading could result in cost reductions, shorter lead times from stump to landing, and lower fuel consumption. However, it might also create waiting times for the machines involved, whereas multifunctional machines are likely to be expensive. Thus, it is important to analyze whether or not the advantages of any changes outweigh the disadvantages. The conventional system was compared with four potential systems, including two with autonomous forwarders, using discrete-event simulation with stochastic elements in which harvests of more than 1000 final felling stands (containing in total 1.6 million m3) were simulated 35 times per system. The results indicate that harwarders have substantial potential (less expensive on ≥80% of the volume and fuel consumption decreased by ≥18%) and may become competitive if key innovations are developed. Systems with cooperating machines have considerably less potential, limited to very specific stand conditions. The results conform with expected difficulties in integrating processing and transporting machines’ work in variable environments., Included in thesis in manuscript form.

In conventional mechanized cut-to-length systems, a harvester fells and cuts trees into logs that are stored on the ground until a forwarder picks them up and carries them to landing sites. A proposed improvement is to place logs directly into the load spaces of transporting machines as they are cut. Such integrated loading could result in cost reductions, shorter lead times from stump to landing, and lower fuel consumption. However, it might also create waiting times for the machines involved, whereas multifunctional machines are likely to be expensive. Thus, it is important to analyze whether or not the advantages of any changes outweigh the disadvantages. The conventional system was compared with four potential systems, including two with autonomous forwarders, using discrete-event simulation with stochastic elements in which harvests of more than 1000 final felling stands (containing in total 1.6 million m3) were simulated 35 times per system. The results indicate that harwarders have substantial potential (less expensive on ≥80% of the volume and fuel consumption decreased by ≥18%) and may become competitive if key innovations are developed. Systems with cooperating machines have considerably less potential, limited to very specific stand conditions. The results conform with expected difficulties in integrating processing and transporting machines’ work in variable environments., Included in thesis in manuscript form.

Wheel slip may increase the risk for wheel rutting and tear up ground vegetation and superficial roots and thereby decreasing the bearing capacity of the ground, but also reducing the growth of nearby standing forest trees. With increased slip, more energy is consumed for making wheel ruts in the ground, with increased fuel consumption as a result. This paper proposes a novel method for measuring slip in an uneven forest terrain with an 8WD forestry machine. This is done by comparing the wheel velocity reported by the machine and velocity measured with an accurate DGPS system. Field tests with a forestry machine showed that slip could be calculated accurately with the suggested method. The tests showed that there was almost no slip on asphalt or gravel surfaces. In a forest environment, 10–15% slip was common. A future extension of the method enabling estimation of the slip of each wheel pair in the bogies is also suggested.

Autonomous navigation in forest terrain, where operation paths are rarely straight or flat and obstacles are common, is challenging. This paper evaluates a system designed to autonomously follow previously demonstrated paths in a forest environment without loading/unloading timber, a pre-step in the development of fully autonomous forwarders. The system consisted of a forwarder equipped with a high-precision global positioning system to measure the vehicle’s heading and position. A gyro was used to compensate for the influence of the vehicle’s roll and pitch. On an ordinary clear-cut forest area with numerous stumps, the vehicle was able to follow two different tracks, three times each at a speed of 1 m s-1, with a mean path tracking error of 6 and 7 cm, respectively. The error never exceeded 35 cm, and in 90% of the observations it was less than 14 and 15 cm, respectively. This accuracy is well within the necessary tolerance for forestry operations. In fact, a human operator would probably have a hard time following the track more accurately. Hence, the developed systems function satisfactorily when using previously demonstrated paths. However, further research on planning new paths in unknown unstructured terrain and on loading/unloading is required before timber transports can be fully automated.

Autonomous navigation in forest terrain, where operation paths are rarely straight or flat and obstacles are common, is challenging. This paper evaluates a system designed to autonomously follow previously demonstrated paths in a forest environment without loading/unloading timber, a pre-step in the development of fully autonomous forwarders. The system consisted of a forwarder equipped with a high-precision global positioning system to measure the vehicle’s heading and position. A gyro was used to compensate for the influence of the vehicle’s roll and pitch. On an ordinary clear-cut forest area with numerous stumps, the vehicle was able to follow two different tracks, three times each at a speed of 1 m s-1, with a mean path tracking error of 6 and 7 cm, respectively. The error never exceeded 35 cm, and in 90% of the observations it was less than 14 and 15 cm, respectively. This accuracy is well within the necessary tolerance for forestry operations. In fact, a human operator would probably have a hard time following the track more accurately. Hence, the developed systems function satisfactorily when using previously demonstrated paths. However, further research on planning new paths in unknown unstructured terrain and on loading/unloading is required before timber transports can be fully automated.

Autonomous navigation in forest terrain, where operation paths are rarely straight or flat and obstacles are common, is challenging. This paper evaluates a system designed to autonomously follow previously demonstrated paths in a forest environment without loading/unloading timber, a pre-step in the development of fully autonomous forwarders. The system consisted of a forwarder equipped with a high-precision global positioning system to measure the vehicle’s heading and position. A gyro was used to compensate for the influence of the vehicle’s roll and pitch. On an ordinary clear-cut forest area with numerous stumps, the vehicle was able to follow two different tracks, three times each at a speed of 1 m s-1, with a mean path tracking error of 6 and 7 cm, respectively. The error never exceeded 35 cm, and in 90% of the observations it was less than 14 and 15 cm, respectively. This accuracy is well within the necessary tolerance for forestry operations. In fact, a human operator would probably have a hard time following the track more accurately. Hence, the developed systems function satisfactorily when using previously demonstrated paths. However, further research on planning new paths in unknown unstructured terrain and on loading/unloading is required before timber transports can be fully automated.

Autonomous navigation in forest terrain, where operation paths are rarely straight or flat and obstacles are common, is challenging. This paper evaluates a system designed to autonomously follow previously demonstrated paths in a forest environment without loading/unloading timber, a pre-step in the development of fully autonomous forwarders. The system consisted of a forwarder equipped with a high-precision global positioning system to measure the vehicle’s heading and position. A gyro was used to compensate for the influence of the vehicle’s roll and pitch. On an ordinary clear-cut forest area with numerous stumps, the vehicle was able to follow two different tracks, three times each at a speed of 1 m s-1, with a mean path tracking error of 6 and 7 cm, respectively. The error never exceeded 35 cm, and in 90% of the observations it was less than 14 and 15 cm, respectively. This accuracy is well within the necessary tolerance for forestry operations. In fact, a human operator would probably have a hard time following the track more accurately. Hence, the developed systems function satisfactorily when using previously demonstrated paths. However, further research on planning new paths in unknown unstructured terrain and on loading/unloading is required before timber transports can be fully automated.

Autonomous navigation in forest terrain, where operation paths are rarely straight or flat and obstacles are common, is challenging. This paper evaluates a system designed to autonomously follow previously demonstrated paths in a forest environment without loading/unloading timber, a pre-step in the development of fully autonomous forwarders. The system consisted of a forwarder equipped with a high-precision global positioning system to measure the vehicle’s heading and position. A gyro was used to compensate for the influence of the vehicle’s roll and pitch. On an ordinary clear-cut forest area with numerous stumps, the vehicle was able to follow two different tracks, three times each at a speed of 1 m s-1, with a mean path tracking error of 6 and 7 cm, respectively. The error never exceeded 35 cm, and in 90% of the observations it was less than 14 and 15 cm, respectively. This accuracy is well within the necessary tolerance for forestry operations. In fact, a human operator would probably have a hard time following the track more accurately. Hence, the developed systems function satisfactorily when using previously demonstrated paths. However, further research on planning new paths in unknown unstructured terrain and on loading/unloading is required before timber transports can be fully automated.

Autonomous navigation in forest terrain, where operation paths are rarely straight or flat and obstacles are common, is challenging. This paper evaluates a system designed to autonomously follow previously demonstrated paths in a forest environment without loading/unloading timber, a pre-step in the development of fully autonomous forwarders. The system consisted of a forwarder equipped with a high-precision global positioning system to measure the vehicle’s heading and position. A gyro was used to compensate for the influence of the vehicle’s roll and pitch. On an ordinary clear-cut forest area with numerous stumps, the vehicle was able to follow two different tracks, three times each at a speed of 1 m s-1, with a mean path tracking error of 6 and 7 cm, respectively. The error never exceeded 35 cm, and in 90% of the observations it was less than 14 and 15 cm, respectively. This accuracy is well within the necessary tolerance for forestry operations. In fact, a human operator would probably have a hard time following the track more accurately. Hence, the developed systems function satisfactorily when using previously demonstrated paths. However, further research on planning new paths in unknown unstructured terrain and on loading/unloading is required before timber transports can be fully automated.