Search

In order to improve the evaluation ability of bearing capacity of offshore large-diameter monopile, the initial high strain detection and repeated high strain detection with an interval of 10-84 days were carried out on 6 large-diameter monopiles with a diameter of 7.2m-7.4m in the offshore wind field dominated by cohesive soil layer. The results show that the time-dependent increase of tip resistance, pile side resistance and total resistance of large-diameter monopiles in the same offshore wind farm has great discreteness, and the axial force increment of pile has a consistent change trend. This paper puts forward the prediction interval of 95% guarantee rate of bearing capacity increment of offshore large-diameter single pile based on depth, which provides a basis for the design of large-diameter monopile.

In order to explore the variation law of soil particle displacement and pile force around piles during penetration process, the DEM (Discrete Element Method) model is used to test the penetration of pile foundation in layered soft soil foundation. The variation law of pile penetration force, radial pressure at pile-soil interface, friction resistance at pile side, displacement field and force field between particles during penetration process is analyzed. Research shows: (1) The penetration force increases with the increase of penetration depth and pile diameter. The increase of pile diameter is beneficial to overcome the influence of unfavorable strata. (2) At the same penetration depth, with the continuous penetration of the pile body, the radial pressure gradually decreases, showing a significant degradation phenomenon. The reason for the degradation of lateral friction is essentially the degradation of the radial pressure. (3) The distribution of contact force chain in different soil layers is similar, but the range of action is different. The contact force in silt layer is obviously larger than that in silty clay layer. The compressive stress of the soil at the end of the pile transfers radially with tensile stress. With the increase of pile diameter, the compressive stress and tensile stress in soil layer are gradually increasing, and the influence range of compressive stress and tensile stress is also gradually increasing. (4) The displacement of the soil below the pile tip is triangular, and the soil at the pile tip is squeezed around under the action of the pile tip. The influence range of particle displacement in each soil layer is different, and the influence range of particle displacement in silt layer is obviously smaller than that in silty clay layer.

At present, the constructionindustry is in urgent need of a big transformation from the traditional extensive development model to achieve transformation and upgrading. The cooperative application mode of lean construction and BIM is the important driving method of this change. It effectively solved the information technology problems in the process of lean construction implementation. Meanwhile, the lean construction system also provides a better application environment for BIM and fully realizes the technical value. From the perspective of multiple applications, this paper introduces in detail how BIM uses its technical advantages to enhance the application value of lean construction in the construction industry.