Search

Background Preoperative planning and postoperative evaluation of component position in total hip arthroplasty (THA) utilize specialized software that must be able to provide measurements that are both accurate and precise. A new software program for use in THA has recently been developed. We sought to evaluate the accuracy of this new software in comparison with two current, widely used software programs. Methodology Postoperative anteroposterior (AP) pelvic radiographs from 135 THA patients were retrospectively reviewed. Reference values for acetabular anteversion, inclination, and leg length were established using validated software programs (TraumaCad ® as the primary reference value [PRV] and OsiriX Lite TM as the secondary reference value [SRV]). Measurements from the new software program (Intellijoint VIEW TM ) were compared with reference values using Student's t-test and chi-square test. Results For anteversion, mean values for the PRV (27.34° ± 7.27°) and the new software (27.29° ± 7.21°) were not significantly different (p = 0.49). The new software differed from the PRV by a mean of 0.05° ± 0.93°. Similar results were noted for inclination, where the new software differed from the PRV and SRV by -0.13° ± 0.65° and 0.25° ± 1.26°, respectively (mean values: PRV: 43.62° ± 6.02°; SRV: 43.99° ± 6.27°; new software: 43.74° ± 6.17°; p = 0.87), and for leg length, where the new software differed from the PRV and SRV by 0.05 mm ± 0.46 mm and 0.22 mm ± 0.52 mm, respectively (mean values: PRV: 10.61 mm ± 11.60 mm; SRV: 10.77 mm ± 11.70 mm; new software: 10.56 mm - ± 11.61 mm; p = 0.98). Measurements were highly correlated across multiple reviewers (intraclass correlation coefficient ≥0.987). Conclusions The new software measurement tool is accurate and precise for assessing the acetabular component position and leg length measurements following THA in AP pelvic radiographs compared to currently used image measurement software., Competing Interests: The authors have declared financial relationships, which are detailed in the next section., (Copyright © 2021, Muir et al.)

Background Anteroposterior (AP) pelvic radiographs remain the standard for pre- and postoperative imaging during total hip arthroplasty (THA), despite the known limitation of plain films, including the inability to adequately account for distortion caused by variations in pelvic orientation such as pelvic tilt. The purpose of this study was to develop a reliable method for correcting pelvic tilt on AP pelvic radiographs in patients undergoing THA. Methods CT scans from 20 patients/cadaver specimens (10 male, 10 female) were used to create 3D renderings, from which synthetic radiographs of each pelvis were generated. For each pelvis, 13 synthetic radiographs were generated, showing the pelvis at between -30° and 30° of pelvic tilt, in 5° increments. On each image, eight unique parameters/distances were measured to determine the most appropriate parameters for the calculation of pelvic tilt. The most reliable and accurate of these parameters was determined via regression analysis and used to create gender-specific nomograms from which pelvic tilt measurements could be calculated. The accuracy and reliability of the nomograms and correction method were subsequently validated using both synthetic radiographs (n=50) and stereoradiographic images (n=58). Results Of the eight parameters measured, the vertical distance between the superior margin of the pubic symphysis and the transischial line (PSTI) was determined to be the most reliable (r=-0.96, ICC=0.94). Using that parameter and applying the associated nomograms to 50 synthetic radiographs of random pelvic tilt, the mean difference between the actual pelvic tilt and that calculated using the correction method was 0.1°±5.1° (p=0.98, r=0.96). In 58 stereoradiographic images, the mean difference between actual and measured pelvic tilt was -0.2°±6.4° (p=0.74, r=0.77). The pooled results indicate no significant difference between actual (2.2°±13.9°) and measured pelvic tilt (2.1°±14.3°, p=0.93, r=0.91). No significant differences were noted based on gender. Conclusions Our method of correcting for pelvic tilt using the vertical distance from the pubic symphysis to the transischial line provides a reliable method for correcting for pelvic tilt on AP pelvic radiographs., Competing Interests: The authors have declared that no competing interests exist., (Copyright © 2019, Muir et al.)

Lumbar discectomy is a mainstay surgical treatment for herniation of the lumbar discs and is effective at treating radicular symptomology. Despite the overall success of the procedure; the potential for reherniation and reoperation is significant. To avoid this potential recurrence, surgeons often perform discectomy more aggressively, removing a larger volume of nuclear material in the hopes of minimizing the likelihood of reherniation. This approach, while beneficial in minimizing the chance of reherniation, is associated with a volumetric reduction of the nucleus within the disc space, making the disc more prone to collapse and thus inducing a significant post-operative loss of disc height. While potentially minor in isolation, the loss of disc height, in fact, impacts several aspects of overall patient well-being. We hypothesize that the loss of disc height following discectomy causes an increase in pain and subsequent disability, the combination of which ultimately impacts socioeconomic factors affecting both the patient and the healthcare system as a whole. In this report, we outline the evidence in support of this disability cascade and provide recommendations on methods for limiting its impact. Given the current focus on cost-effectiveness in healthcare decision-making, methods for limiting this potentially damaging sequence of events must be investigated., Competing Interests: The authors have declared financial relationships, which are detailed in the next section.

Background  Appropriate component positioning in total hip arthroplasty (THA) is imperative for long-term survivorship. C-arm fluoroscopy provides visual guidance in the direct anterior approach (DAA), but it is limited by qualitative properties. Conversely, imageless computer-assisted navigation systems (CAS) provide surgeons with intraoperative, three-dimensional (3D) quantitative measurements for cup position, although the accuracy of such systems has not been extensively addressed in the DAA. We evaluated the ability of an imageless CAS to deliver measurements for acetabular cup position with accuracy in the DAA. Materials and methods  A retrospective analysis of 69 primary THA procedures was conducted. Acetabular cup position measurements (anteversion and inclination) obtained intraoperatively by imageless navigation were compared to standard, postoperative anteroposterior pelvic radiographic measurements. Statistical comparisons were made using the Bland-Altman technique. Results  The mean difference between device and radiographic measurements for anteversion was 3.4° (standard deviation (SD): 4.1°; absolute mean difference (ABS): 4.2°), and 4.0° for inclination (SD: 3.6°; ABS: 4.3°). Bland-Altman analysis demonstrated excellent agreement; 93% (64/69) and 97% (67/69) of anteversion pairings fell within the statistical and clinical limits of agreement, whereas 94% (65/69) and 100% (69/69) of inclination pairings were within the statistical and clinical limits, respectively. Conclusions  Measurements obtained intraoperatively for acetabular cup position using imageless navigation in the DAA are agreeable with the current clinical standard., Competing Interests: The authors have declared financial relationships, which are detailed in the next section.

Background Fractures of the proximal humerus are among the most common long-bone fractures and present unique challenges to surgeons. Traditional internal fixation methods, such as intramedullary nails, are associated with drawbacks such as an inability to fully fill the trabecular space and a limited ability to utilize supplemental hardware in many cases. We evaluated the safety and effectiveness of a novel fracture fixation device that utilizes a light-cured monomer to stabilize the fracture in a cohort of patients suffering from humerus fractures. Methods We prospectively collected data from patients being treated surgically for humerus fractures. Fractures were treated using the photodynamic bone stabilization system (PBSS) consisting of a balloon and light-cured monomer. Patients were evaluated at 7-14, 30, 60, 90, 180, and 360 days post-procedure. Primary outcomes included normal and complete radiographic fracture healing. Secondary outcomes included pain (via visual analog scale), function (via the disability of the arm, shoulder, and hand (DASH) and constant shoulder scales), and the rate of complications. Results A total of 33 patients were included in the intent-to-treat analysis (mean age: 76.6 yrs). Of these patients, 88% demonstrated normal radiographic healing at their 90-, 180-, and 360-day visits. Complete radiographic healing was observed in 81%, 88%, and 96% of patients at 90, 180, and 360 days, respectively. Pain scores decreased significantly at day seven when compared with baseline (28.2+20.9 vs.53.6+32.2, p<0.001) and continued to decrease at the 90-day (24.7+15.5, p<0.001), 180-day (17.8+12.5, p<0.001) and 360-day (6.6+6.7, p<0.001) evaluations. DASH scores demonstrated statistically significant improvements over baseline (65.5+31.5) at 90 (37.0+14.9, p<0.001), 180 (30.6+15.7, p<0.001), and 360 days (23.9+15.0, p<0.001) post-procedure. The procedure-related event rate was 36.4%, with 5 (11.4%) device-related adverse events reported at the one-year follow-up. Conclusions Our study demonstrates the ability of a novel internal fixation device to safely and effectively treat fractures of the humerus in the elderly population., Competing Interests: The authors have declared financial relationships, which are detailed in the next section., (Copyright © 2018, Vegt et al.)

Despite inaccuracies due to artifact and variations in patient positioning, anteroposterior (AP) radiographs remain the clinical standard for post-operative evaluation of component placement following total hip arthroplasty (THA). However, cup position, specifically anteversion, can be significantly affected by variations in patient positioning on an X-ray. A major cause of such artifact is unaccounted for pelvic tilt. Several methods for correcting the effects of pelvic tilt on radiographic anteversion have been proposed, with varying degrees of accuracy. The purpose of this study was to evaluate the accuracy and reliability of a commonly referenced method for correcting acetabular cup anteversion in a cohort undergoing total hip arthroplasty and determine its appropriateness for use in this population of patients. Radiographs from patients who underwent primary or revision hip arthroplasty between February 2016 and February 2017 were retrospectively reviewed. Corrected anteversion was calculated by measuring the vertical distance between the symphysis pubis and the sacrococcygeal joint, per the method outlined by Tannast et al. This symphococcygeal distance was then applied to Tannast's nomograms to calculate the magnitude of pelvic tilt. Corrected and uncorrected anteversion values were compared to anteversion values collected intraoperatively using an imageless computer-assisted navigation device. A total of 71 cases were initially eligible for inclusion in the study. The correction method could not be applied in 44% (31/71) of the cases, chiefly due to difficulties in visualizing the required landmarks. In cases where it could be applied, corrected values correlated very poorly with navigation measurements (r = -0.07). Mean corrected anteversion (36.9°, SD: 7.4°) differed from uncorrected anteversion (25.2°, SD: 7.6°) by an average of 13.5° (p<0.001). Mean navigated anteversion (27.4°, SD: 5.7°) differed from corrected values by an average of 10.8° (p=0.16). The evaluated correction method could not be consistently applied to radiographs and did not reliably correct anteversion due to pelvic tilt in this population of patients undergoing hip arthroplasty. This correction method does not appear to be appropriate for use in this patient population., Competing Interests: The authors have declared financial relationships, which are detailed in the next section.