Search

Oxidation of volatile organic compounds (VOCs) can lead to the formation of secondary organic aerosol (SOA), a significant component of atmospheric fine particles, which can affect air quality, human health, and climate change. However, the current understanding of the formation mechanism of SOA is still incomplete, which is not only due to the complexity of the chemistry but also relates to analytical challenges in SOA precursor detection and quantification. Recent instrumental advances, especially the development of high-resolution time-of-flight chemical ionization mass spectrometry (CIMS), greatly improved both the detection and quantification of low- and extremely low-volatility organic molecules (LVOCs/ELVOCs), which largely facilitated the investigation of SOA formation pathways. However, analyzing and interpreting complex mass spectrometric data remain a challenging task. This necessitates the use of dimension reduction techniques to simplify mass spectrometric data with the purpose of extracting chemical and kinetic information of the investigated system. Here we present an approach to apply fuzzy c -means clustering (FCM) to analyze CIMS data from a chamber experiment, aiming to investigate the gas phase chemistry of the nitrate-radical-initiated oxidation of isoprene. The performance of FCM was evaluated and validated. By applying FCM to measurements, various oxidation products were classified into different groups, based on their chemical and kinetic properties, and the common patterns of their time series were identified, which provided insight into the chemistry of the investigated system. The chemical properties of the clusters are described by elemental ratios and the average carbon oxidation state, and the kinetic behaviors are parameterized with a generation number and effective rate coefficient (describing the average reactivity of a species) using the gamma kinetic parameterization model. In addition, the fuzziness of FCM algorithm provides a possibility for the separation of isomers or different chemical processes that species are involved in, which could be useful for mechanism development. Overall, FCM is a technique that can be applied well to simplify complex mass spectrometric data, and the chemical and kinetic properties derived from clustering can be utilized to understand the reaction system of interest. [ABSTRACT FROM AUTHOR]

This study explores the differences in performance and results by various versions of the ISORROPIA thermodynamic module implemented within the ECHAM/MESSy Atmospheric Chemistry (EMAC) model. Three different versions of the module were used, ISORROPIA II v1, ISORROPIA II v2.3, and ISORROPIA-lite. First, ISORROPIA II v2.3 replaced ISORROPIA II v1 in EMAC to improve pH predictions close to neutral conditions. The newly developed ISORROPIA-lite has been added to EMAC alongside ISORROPIA II v2.3. ISORROPIA-lite is more computationally efficient and assumes that atmospheric aerosols exist always as supersaturated aqueous (metastable) solutions, while ISORROPIA II includes the option to allow for the formation of solid salts at low RH conditions (stable state). The predictions of EMAC by employing all three aerosol thermodynamic models were compared to each other and evaluated against surface measurements from three regional observational networks in the polluted Northern Hemisphere (Interagency Monitoring of Protected Visual Environments (IMPROVE), European Monitoring and Evaluation Programme (EMEP), and Acid Deposition Monitoring Network of East Asia (EANET)). The differences between ISORROPIA II v2.3 and ISORROPIA-lite were minimal in all comparisons with the normalized mean absolute difference for the concentrations of all major aerosol components being less than 11 % even when different phase state assumptions were used. The most notable differences were lower aerosol concentrations predicted by ISORROPIA-lite in regions with relative humidity in the range of 20 % to 60 % compared to the predictions of ISORROPIA II v2.3 in stable mode. The comparison against observations yielded satisfactory agreement especially over the USA and Europe but higher deviations over East Asia, where the overprediction of EMAC for nitrate was as high as 4 µ g m -3 (∼20%). The mean annual aerosol pH predicted by ISORROPIA-lite was on average less than a unit lower than ISORROPIA II v2.3 in stable mode, mainly for coarse-mode aerosols over the Middle East. The use of ISORROPIA-lite accelerated EMAC by nearly 5 % compared to the use of ISORROPIA II v2.3 even if the aerosol thermodynamic calculations consume a relatively small fraction of the EMAC computational time. ISORROPIA-lite can therefore be a reliable and computationally efficient alternative to the previous thermodynamic module in EMAC. [ABSTRACT FROM AUTHOR]

This study explores the differences in performance and results by various versions of the ISORROPIA thermodynamic module implemented within the global atmospheric chemistry model EMAC. Three different versions of the module were used, ISORROPIA II v1, ISORROPIA II v2.3, and ISORROPIA-lite. First, ISORROPIA II v2.3 replaced ISORROPIA II v1 in EMAC to improve pH predictions close to neutral conditions. The newly developed ISORROPIA-lite has been added to EMAC alongside ISORROPIA II v2.3. ISORROPIA-lite is more computationally efficient and assumes that atmospheric aerosols exist always as supersaturated aqueous (metastable) solutions while ISORROPIA II includes the option to allow the formation of solid salts at low RH conditions (stable state). The predictions of EMAC by employing all three aerosol thermodynamic models were compared to each other and evaluated against surface measurements from three regional observational networks (IMPROVE, EMEP, EANET) in the polluted Northern Hemisphere. The differences between ISORROPIA II v2.3 and ISORROPIA-lite were minimal in all comparisons with the normalized mean absolute difference for the concentrations of all major aerosol components being less than 10 % even when different phase state assumptions were used. The most notable differences were lower aerosol concentrations predicted by ISORROPIA-lite in regions with relative humidity in the range of 20% to 60% compared to the predictions of ISORROPIA II v2.3 in stable mode. The comparison against observations yielded satisfactory agreement especially over the US and Europe, but higher deviations over East Asia, where the overprediction of EMAC for nitrate was as high as 4 μg m-3 (~ 20%). The mean annual aerosol pH predicted by ISORROPIAlite was on average less than a unit lower than ISORROPIA II v2.3 in stable mode, mainly for coarse mode aerosols over Middle East. The use of ISORROPIA-lite accelerated EMAC by 5 % compared to the use of ISORROPIA II v2.3 even if the aerosol thermodynamic calculations consume a relatively small fraction of the EMAC computational time. ISORROPIA-lite can therefore be a reliable and computationally effective replacement of the previous thermodynamic module in EMAC. [ABSTRACT FROM AUTHOR]

Oxidation of volatile organic compounds (VOCs) can lead to the formation of secondary organic aerosol, a significant component of atmospheric fine particles, which can affect air quality, human health, and climate change. However, current understanding of the formation mechanism of SOA is still incomplete, which is not only due to the complexity of the chemistry, but also relates to analytical challenges in SOA precursor detection and quantification. Recent instrumental advances, especially the developments of high-resolution time-of-flight chemical ionization mass spectrometry (CIMS), greatly enhanced the capability to detect low- and extremely low-volatility organic molecules (L/ELVOCs). Although detection and characterization of low volatility vapors largely improved our understanding of SOA formation, analyzing and interpreting complex mass spectrometric data remains a challenging task. This necessitates the use of dimension-reduction techniques to simplify mass spectrometric data with the purpose of extracting chemical and kinetic information of the investigated system. Here we present an approach by using fuzzy c -means clustering (FCM) to analyze CIMS data from chamber experiments aiming to investigate the gas-phase chemistry of nitrate radical initiated oxidation of isoprene. The performance of FCM was evaluated and validated. By applying FCM various oxidation products were classified into different groups according to their chemical and kinetic properties, and the common patterns of their time series were identified, which gave insights into the chemistry of the system investigated. The chemical properties are characterized by elemental ratios and average carbon oxidation state, and the kinetic behaviors are parameterized with generation number and effective rate coefficient (describing the average reactivity of a species) by using the gamma kinetic parameterization model. In addition, the fuzziness of FCM algorithm provides a possibility to separate isomers or different chemical processes species are involved in, which could be useful for mechanism development. Overall FCM is a well applicable technique to simplify complex mass spectrometric data, and the chemical and kinetic properties derived from clustering can be utilized to understand the reaction system of interest. [ABSTRACT FROM AUTHOR]

Highly oxygenated organic molecules (HOMs) play a pivotal role in the formation of secondary organic aerosol (SOA). Therefore, the distribution and yields of HOMs are fundamental to understand their fate and chemical evolution in the atmosphere, and it is conducive to ultimately assess the impact of SOA on air quality and climate change. In this study, gas-phase HOMs formed from the reaction of limonene with OH radicals in photooxidation were investigated with SAPHIR (Simulation of Atmospheric PHotochemistry In a large Reaction chamber), using a time-of-flight chemical ionization mass spectrometer with nitrate reagent ion (NO 3- -CIMS). A large number of HOMs, including monomers (C 9–10) and dimers (C 17–20), were detected and classified into various families. Both closed-shell products and open-shell peroxy radicals (RO 2) were identified under low NO (0.06–0.1 ppb) and high NO conditions (17 ppb). C 10 monomers are the most abundant HOM products and account for over 80 % total HOMs. Closed-shell C 10 monomers were formed from a two peroxy radical family, C 10 H 15 O x⚫ (x=6 –15) and C 10 H 17 O x⚫ (x=6 –15), and their respective termination reactions with NO, RO 2 , and HO 2. While C 10 H 17 O x⚫ is likely formed by OH addition to C 10 H 16 , the dominant initial step of limonene plus OH, C 10 H 15 O x⚫ , is likely formed via H abstraction by OH. C 10 H 15 O x⚫ and related products contributed 41 % and 42 % of C 10 HOMs at low and high NO, demonstrating that the H-abstraction pathways play a significant role in HOM formation in the reaction of limonene plus OH. Combining theoretical kinetic calculations, structure–activity relationships (SARs), data from the literature, and the observed RO 2 intensities, we proposed tentative mechanisms of HOM formation from both pathways. We further estimated the molar yields of HOMs to be 1.97-1.06+2.52 % and 0.29-0.16+0.38 % at low and high NO, respectively. Our study highlights the importance of H abstraction by OH and provides the yield and tentative pathways in the OH oxidation of limonene to simulate the HOM formation and assess the role of HOMs in SOA formation. [ABSTRACT FROM AUTHOR]

Photochemical processes in ambient air were studied using the atmospheric simulation chamber SAPHIR at Forschungszentrum Jülich, Germany. Ambient air was continuously drawn into the chamber through a 50 m high inlet line and passed through the chamber for 1 month in each season throughout 2019. The residence time of the air inside the chamber was about 1 h. As the research center is surrounded by a mixed deciduous forest and is located close to the city Jülich, the sampled air was influenced by both anthropogenic and biogenic emissions. Measurements of hydroxyl (OH), hydroperoxyl (HO 2), and organic peroxy (RO 2) radicals were achieved by a laser-induced fluorescence instrument. The radical measurements together with measurements of OH reactivity (kOH , the inverse of the OH lifetime) and a comprehensive set of trace gas concentrations and aerosol properties allowed for the investigation of the seasonal and diurnal variation of radical production and destruction pathways. In spring and summer periods, median OH concentrations reached 6 × 10 6 cm -3 at noon, and median concentrations of both HO 2 and RO 2 radicals were 3 × 10 8 cm -3. The measured OH reactivity was between 4 and 18 s -1 in both seasons. The total reaction rate of peroxy radicals with NO was found to be consistent with production rates of odd oxygen (O x= NO 2+ O 3) determined from NO 2 and O 3 concentration measurements. The chemical budgets of radicals were analyzed for the spring and summer seasons, when peroxy radical concentrations were above the detection limit. For most conditions, the concentrations of radicals were mainly sustained by the regeneration of OH via reactions of HO 2 and RO 2 radicals with nitric oxide (NO). The median diurnal profiles of the total radical production and destruction rates showed maxima between 3 and 6 ppbv h -1 for OH, HO 2 , and RO 2. Total RO X (OH, HO 2 , and RO 2) initiation and termination rates were below 3 ppbv h -1. The highest OH radical turnover rate of 13 ppbv h -1 was observed during a high-temperature (max. 40 ∘ C) period in August. In this period, the highest HO 2 , RO 2 , and RO X turnover rates were around 11, 10, and 4 ppbv h -1 , respectively. When NO mixing ratios were between 1 and 3 ppbv, OH and HO 2 production and destruction rates were balanced, but unexplained RO 2 and RO X production reactions with median rates of 2 and 0.4 ppbv h -1 , respectively, were required to balance their destruction. For NO mixing ratios above 3 ppbv, the peroxy radical reaction rates with NO were highly uncertain due to the low peroxy radical concentrations close to the limit of NO interferences in the HO 2 and RO 2 measurements. For NO mixing ratios below 1 ppbv, a missing source for OH and a missing sink for HO 2 were found with maximum rates of 3.0 and 2.0 ppbv h -1 , respectively. The missing OH source likely consisted of a combination of a missing inter-radical HO 2 to OH conversion reaction (up to 2 ppbv h -1) and a missing primary radical source (0.5–1.4 ppbv h -1). The dataset collected in this campaign allowed analyzing the potential impact of OH regeneration from RO 2 isomerization reactions from isoprene, HO 2 uptake on aerosol, and RO 2 production from chlorine chemistry on radical production and destruction rates. These processes were negligible for the chemical conditions encountered in this study. [ABSTRACT FROM AUTHOR]

In this work, we used a Zeppelin NT equipped with six sensor setups, each composed of four different low-cost electrochemical sensors (ECSs) to measure nitrogen oxides (NO and NO 2), carbon monoxide, and O x (NO2+O3) in Germany. Additionally, a MIRO MGA laser absorption spectrometer was installed as a reference device for in-flight evaluation of the ECSs. We report not only the influence of temperature on the NO and NO 2 sensor outputs but also find a shorter timescale (1 s) dependence of the sensors on the relative humidity gradient. To account for these dependencies, we developed a correction method that is independent of the reference instrument. After applying this correction to all individual sensors, we compare the sensor setups with each other and to the reference device. For the intercomparison of all six setups, we find good agreements with R2≥0.8 but different precisions for each sensor in the range from 1.45 to 6.32 ppb (parts per billion). The comparison to the reference device results in an R2 of 0.88 and a slope of 0.92 for NO x (NO+NO2). Furthermore, the average noise (1 σ) of the NO and NO 2 sensors reduces significantly from 6.25 and 7.1 to 1.95 and 3.32 ppb, respectively. Finally, we highlight the potential use of ECSs in airborne applications by identifying different pollution sources related to industrial and traffic emissions during multiple commercial and targeted Zeppelin flights in spring 2020. These results are a first milestone towards the quality-assured use of low-cost sensors in airborne settings without a reference device, e.g., on unmanned aerial vehicles (UAVs). [ABSTRACT FROM AUTHOR]

A Zeppelin airship was used as a platform for in situ measurements of greenhouse gases and short-lived air pollutants within the planetary boundary layer (PBL) in Germany. A novel quantum cascade laser-based multi-compound gas analyzer (MIRO Analytical AG) was deployed to simultaneously measure in situ concentrations of greenhouse gases (CO 2 , N 2 O, H 2 O, and CH 4) and air pollutants (CO, NO, NO 2 , O 3 , SO 2 , and NH 3) with high precision at a measurement rate of 1 Hz. These measurements were complemented by electrochemical sensors for NO, NO 2 , O x (NO 2 + O 3), and CO, an optical particle counter, temperature, humidity, altitude, and position monitoring. Instruments were operated remotely without the need for on-site interactions. Three 2-week campaigns were conducted in 2020 comprising commercial passenger as well as targeted flights over multiple German cities including Cologne, Mönchengladbach, Düsseldorf, Aachen, Frankfurt, but also over industrial areas and highways. Vertical profiles of trace gases were obtained during the airship landing and take-off. Diurnal variability of the Zeppelin vertical profiles was compared to measurements from ground-based monitoring stations with a focus on nitrogen oxides and ozone. We find that their variability can be explained by the increasing nocturnal boundary layer height from early morning towards midday, an increase in emissions during rush hour traffic, and the rapid photochemical activity midday. Higher altitude (250–450 m) NO x to CO ratios are further compared to the 2015 EDGAR emission inventory to find that pollutant concentrations are influenced by transportation and residential emissions as well as manufacturing industries and construction activity. Finally, we report NO x and CO concentrations from one plume transect originating from a coal power plant and compare it to the EURopean Air pollution Dispersion-Inverse Modell (EURAD-IM) model to find agreement within 15 %. However, due to the increased contribution of solar and wind energy and the impact of lockdown measures the power plant was operating at max. 50 % capacity; therefore, possible overestimation of emissions by the model cannot be excluded. [ABSTRACT FROM AUTHOR]

Nighttime NO 3 -initiated oxidation of biogenic volatile organic compounds (BVOCs) such as monoterpenes is important for the atmospheric formation and growth of secondary organic aerosol (SOA), which has significant impact on climate, air quality, and human health. In such SOA formation and growth, highly oxygenated organic molecules (HOM) may be crucial, but their formation pathways and role in aerosol formation have yet to be clarified. Among monoterpenes, limonene is of particular interest for its high emission globally and high SOA yield. In this work, HOM formation in the reaction of limonene with nitrate radical (NO 3) was investigated in the SAPHIR chamber (Simulation of Atmospheric PHotochemistry In a large Reaction chamber). About 280 HOM products were identified, grouped into 19 monomer families, 11 dimer families, and 3 trimer families. Both closed-shell products and open-shell peroxy radicals (RO2⚫) were observed, and many of them have not been reported previously. Monomers and dimers accounted for 47 % and 47 % of HOM concentrations, respectively, with trimers making up the remaining 6 %. In the most abundant monomer families, C 10 H 15-17 NO 6-14 , carbonyl products outnumbered hydroxyl products, indicating the importance of RO2⚫ termination by unimolecular dissociation. Both RO2⚫ autoxidation and alkoxy–peroxy pathways were found to be important processes leading to HOM. Time-dependent concentration profiles of monomer products containing nitrogen showed mainly second-generation formation patterns. Dimers were likely formed via the accretion reaction of two monomer RO2⚫ , and HOM-trimers via the accretion reaction between monomer RO2⚫ and dimer RO2⚫. Trimers are suggested to play an important role in new particle formation (NPF) observed in our experiment. A HOM yield of 1.5%-0.7%+1.7% was estimated considering only first-generation products. SOA mass growth could be reasonably explained by HOM condensation on particles assuming irreversible uptake of ultra-low volatility organic compounds (ULVOCs), extremely low volatility organic compounds (ELVOCs), and low volatility organic compounds (LVOCs). This work provides evidence for the important role of HOM formed via the limonene +NO3 reaction in NPF and growth of SOA particles. [ABSTRACT FROM AUTHOR]

Photochemical processes in ambient air were studied using the atmospheric simulation chamber SAPHIR at Forschungszentrum Jülich, Germany. Ambient air was continuously drawn into the chamber through a 50 m high inlet line and passed through the chamber for one month in each season throughout 2019. The residence time of the air inside the chamber was about one hour. As the research centre is surrounded by a mixed deciduous forest and is located close to the city Jülich, the sampled air was influenced by both anthropogenic and biogenic emissions. Measurements of hydroxyl (OH), hydroperoxyl (HO2) and organic peroxy (RO2) radicals were achieved by a laser-induced fluorescence instrument. The radical measurements together with measurements of OH reactivity (k OH, the inverse of the OH lifetime) and a comprehensive set of trace gas concentrations and aerosol properties allowed for the investigation of the seasonal and diurnal variation of radical production and destruction pathways. In spring and summer periods, median OH concentrations reached 6 × 106 cm-3 at noon, and median concentrations of both, HO2 and RO2 radicals, were 3 × 108 cm-3. The measured OH reactivity was between 4 and 18 s-1 in both seasons. The total reaction rate of peroxy radicals with NO was found to be consistent with production rates of odd oxygen (OX = NO2+O3) determined from NO2 and O3 concentration measurements. The chemical budgets of radicals were analysed for the spring and summer seasons, when peroxy radical concentrations were above the detection limit. For most conditions, the concentrations of radicals were mainly sustained by the regeneration of OH via reactions of HO2 and RO2 radicals with nitric oxide (NO). The median diurnal profiles of the total radical production and destruction rates showed maxima between 3 to 8 ppbv h-1 for OH, HO2 and RO2. Total ROX (OH, HO2, and RO2) initiation and termination rates were below 3 ppbv h-1. The highest OH radical turnover rate of 13 ppbv h-1 was observed during a high-temperature (max 40°C) period in August. In this period, the highest HO2, RO2 and ROX turnover rates were around 11, 10 and 4 ppbv h-1, respectively. When NO mixing ratios were between 1 ppbv to 3 ppbv, OH and HO2 production and destruction rates were balanced, but unexplained RO2 and ROX production reactions with median rates of 2 ppbv h-1 and 0.4 ppbv h-1, respectively, were required to balance their destruction. For NO mixing ratios above 3 ppbv, the peroxy radical reaction rates with NO were highly uncertain due to the low peroxy radical concentrations close to the limit of NO interferences in the HO2 and RO2 measurements. For NO mixing ratios below 1 ppbv, a missing OH source with a rate of up to 3.0 ppbv h-1 was found. This missing OH source consists likely of a combination of a missing primary radical source (0.5 ~ 1.4 ppbv h-1) and a missing inter-radical HO2 to OH conversion reaction with a rate of up to 2.5 ppbv h-1. The dataset collected in this campaign allowed to analyze the potential impact of OH regeneration from RO2 isomerization reactions from isoprene, HO2 uptake on aerosol, and RO2 production from chlorine chemistry on radical production and destruction rates. These processes were negligible for the chemical conditions encountered in this study. [ABSTRACT FROM AUTHOR]

In this work we used a Zeppelin NT equipped with six sensor setups, each composed of four different low-cost electrochemical sensors (ECS) to measure nitrogen oxides (NO and NO2), carbon monoxide, and Ox (NO2 + O3) in Germany. Additionally, a MIRO MGA laser absorption spectrometer was installed as a reference device for in-flight evaluation of the ECS. We report the influence of temperature on the NO and NO2 sensor outputs, but also find a shorter time scale (1 s) dependence of the sensors on the relative humidity gradient. To account for these dependencies, we developed a correction method that is independent of the reference instrument. After applying this correction to all individual sensors, we compare the sensor setups with each other and to the reference device. For the intercomparison of all six setups we find good agreements with R² ≥ 0.8, but different precisions for each sensor in the range of 1.45 to 6.32 ppb. The comparison to the reference device results in an R² of 0.88 and a slope of 0.92 for NOx (NO + NO2). Furthermore, the average noise (1 σ) of the NO and NO2 sensors reduces significantly from 6.25 ppb and 7.1 ppb to 1.95 ppb and 3.32 ppb, respectively. Finally, we highlight the potential use of ECS in airborne applications, by identifying different pollution sources related to industrial and traffic emissions during multiple commercial and targeted Zeppelin flights in spring 2020. These results are a first milestone towards the quality-assured use of low-cost sensors in airborne settings without a reference device, e.g., on unmanned aerial vehicles (UAVs). [ABSTRACT FROM AUTHOR]

The oxidation of limonene by the hydroxyl (OH) radical and ozone (O 3) was investigated in the atmospheric simulation chamber SAPHIR (Simulation of Atmospheric PHotochemistry In a large Reaction Chamber) in experiments performed at different nitric oxide (NO) mixing ratios from nearly 0 up to 10 ppbv. For the experiments dominated by OH oxidation, the formaldehyde (HCHO) yield was experimentally determined and found to be (12 ± 3), (13 ± 3), and (32 ± 5) % for experiments with low (∼ 0.1 ppbv), medium (∼ 0.3 ppbv), and high NO (5 to 10 ppbv), respectively. The yield in an ozonolysis-only experiment was (10 ± 1) %, which agrees with previous laboratory studies. The experimental yield of the first-generation organic nitrates from limonene–OH oxidation is calculated as (34 ± 5) %, about 11 % higher than the value in the Master Chemical Mechanism (MCM), which is derived from structure–activity relationships (SARs). Time series of measured radicals, trace-gas concentrations, and OH reactivity are compared to results from zero-dimensional chemical box model calculations applying MCM v3.3.1. Modeled OH reactivity is 5 to 10 s -1 (25 % to 33 % of the OH reactivity at the start of the experiment) higher than measured values at the end of the experiments under all chemical conditions investigated, suggesting either that there are unaccounted loss processes of limonene oxidation products or that products are less reactive toward OH. In addition, model calculations underestimate measured hydroperoxyl radical (HO 2) concentrations by 20 % to 90 % and overestimate organic peroxyl radical (RO 2) concentrations by 50 % to 300 %. The largest deviations are found in low-NO experiments and in the ozonolysis experiment. An OH radical budget analysis, which uses only measured quantities, shows that the budget is closed in most of the experiments. A similar budget analysis for RO 2 radicals suggests that an additional RO 2 loss rate constant of about (1–6) × 10 -2 s -1 for first-generation RO 2 is required to match the measured RO 2 concentrations in all experiments. Sensitivity model runs indicate that additional reactions converting RO 2 to HO 2 at a rate constant of about (1.7–3.0) × 10 -2 s -1 would improve the model–measurement agreement of NO x , HO 2, and RO 2 concentrations and OH reactivity. Reaction pathways that could lead to the production of additional OH and HO 2 are discussed, which include isomerization reactions of RO 2 from the oxidation of limonene, different branching ratios for the reaction of RO 2 with HO 2 , and a faster rate constant for RO 2 recombination reactions. As the exact chemical mechanisms of the additional HO 2 and OH sources could not be identified, further work needs to focus on quantifying organic product species and organic peroxy radicals from limonene oxidation. [ABSTRACT FROM AUTHOR]

Ambient measurements of nitryl chloride (ClNO2) were performed at a rural site in Germany covering 3 periods in winter, summer, and autumn 2019 as part of the JULIAC campaign (Jülich Atmospheric Chemistry Project) that aimed for understanding the photochemical processes in air masses typical for mid-west Europe. Measurements were conducted at 50 m above ground, which was most located mainly at the nocturnal boundary layer and thus uncoupled from local surface emissions. ClNO2 is produced at nighttime by heterogeneous reaction of dinitrogen pentoxide (N2O5) on chloride ion (Cl-) containing aerosol. Its photolysis at day is of general interest as it produces chlorine (Cl) atoms that react with different atmospheric trace gases forming radicals. The highest observed ClNO2 mixing ratio was 1.6 ppbv (15-min average) in the middle of one night in September. Air masses reaching the measurement site either originated from long-range transport from the southwest and had an oceanic influence or circulated in the nearby region and were influenced by anthropogenic activities. Nocturnal maximum ClNO2 mixing ratios were around 0.2 ppbv if originating from long-range transport in nearly all seasons, while values were higher ranging from 0.4 to 0.6 ppbv for regionally influenced air. The chemical composition of long-range transported air was similar in all investigated seasons, while the regional air exhibited larger differences between the seasons. The N2O5 necessary for ClNO2 formation comes from the reaction of nitrate radicals (NO3) with nitrogen dioxide 29 (NO2), where NO3 itself is formed by reaction of NO2 with ozone (O3). Measured concentrations of ClNO2, NO2 and O3 were used to quantify ClNO2 production efficiencies, i.e., the yield of ClNO2 formation per NO3 radical formed, and a box model was used to examine the idealized dependence of ClNO2 on the observed nocturnal O3 and NO2 concentrations. Results indicate that ClNO2 production efficiency was most sensitive to the availability of NO2 rather than that of O3 and increase with decreasing temperature. The average ClNO2 production efficiency was highest in February and September with values of 18% and was lowest in December with values of 3%. The average ClNO2 production efficiencies were in the range of 3 and 6 % from August to November for air masses originating from long-range transportation. These numbers are at the high end of values reported in literature indicating the importance of ClNO2 chemistry in rural environments in mid39 west Europe. [ABSTRACT FROM AUTHOR]

An updated and expanded representation of organics in the chemistry general circulation model EMAC (ECHAM5/MESSy for Atmospheric Chemistry) has been evaluated. First, the comprehensive Mainz Organic Mechanism (MOM) in the submodel MECCA (Module Efficiently Calculating the Chemistry of the Atmosphere) was activated with explicit degradation of organic species up to five carbon atoms and a simplified mechanism for larger molecules. Second, the ORACLE submodel (version 1.0) now considers condensation on aerosols for all organics in the mechanism. Parameterizations for aerosol yields are used only for the lumped species that are not included in the explicit mechanism. The simultaneous usage of MOM and ORACLE allows an efficient estimation of not only the chemical degradation of the simulated volatile organic compounds but also the contribution of organics to the growth and fate of (organic) aerosol, with the complexity of the mechanism largely increased compared to EMAC simulations with more simplified chemistry. The model evaluation presented here reveals that the OH concentration is reproduced well globally, whereas significant biases for observed oxygenated organics are present. We also investigate the general properties of the aerosols and their composition, showing that the more sophisticated and process-oriented secondary aerosol formation does not degrade the good agreement of previous model configurations with observations at the surface, allowing further research in the field of gas–aerosol interactions. [ABSTRACT FROM AUTHOR]

It is being suggested that particle-bound or particle-induced reactive oxygen species (ROS), which significantly contribute to the oxidative potential (OP) of aerosol particles, are a promising metric linking aerosol compositions to toxicity and adverse health effects. However, accurate ROS quantification remains challenging due to the reactive and short-lived nature of many ROS components and the lack of appropriate analytical methods for a reliable quantification. Consequently, it remains difficult to gauge their impact on human health, especially to identify how aerosol particle sources and atmospheric processes drive particle-bound ROS formation in a real-world urban environment. In this study, using a novel online particle-bound ROS instrument (OPROSI), we comprehensively characterized and compared the formation of ROS in secondary organic aerosols (SOAs) generated from organic compounds that represent anthropogenic (naphthalene, SOA NAP) and biogenic (β -pinene, SOA βPIN) precursors. The SOA mass was condensed onto soot particles (SP) under varied atmospherically relevant conditions (photochemical aging and humidity) to mimic the SOA formation from a mixing of traffic-related carbonaceous primary aerosols and volatile organic compounds (VOCs). We systematically analyzed the ability of the aqueous extracts of the two aerosol types (SOA NAP -SP and SOA βPIN -SP) to induce ROS production and OP. We further investigated cytotoxicity and cellular ROS production after exposing human lung epithelial cell cultures (A549) to extracts of the two aerosols. A significant finding of this study is that more than 90 % of all ROS components in both SOA types have a short lifetime, highlighting the need to develop online instruments for a meaningful quantification of ROS. Our results also show that photochemical aging promotes particle-bound ROS production and enhances the OP of the aerosols. Compared to SOA βPIN -SP, SOA NAP -SP elicited a higher acellular and cellular ROS production, a higher OP, and a lower cell viability. These consistent results between chemical-based and biological-based analyses indicate that particle-bound ROS quantification could be a feasible metric to predict aerosol particle toxicity and adverse human effects. Moreover, the cellular ROS production caused by SOA exposure not only depends on aerosol type but is also affected by exposure dose, highlighting a need to mimic the process of particle deposition onto lung cells and their interactions as realistically as possible to avoid unknown biases. [ABSTRACT FROM AUTHOR]

A Zeppelin airship was used as a platform for in-situ measurements of greenhouse gases and short-lived air pollutants within the planetary boundary layer (PBL) in Germany. A novel quantum cascade laser-based multi-compound gas analyzer (MIRO Analytical AG) was deployed to simultaneously measure in-situ concentrations of greenhouse gases (CO2, N2O, H2O, and CH4) and air pollutants (CO, NO, NO2, O3, SO2, and NH3) with high precision at a measurement rate of 1 Hz. These measurements were complemented by electrochemical sensors for NO, NO2, Ox (NO2+O3), and CO, an optical particle counter, temperature, humidity, altitude, and position monitoring. Instruments were operated remotely without the need for on-site interactions. Three two-week campaigns were conducted in 2020 comprising commercial passenger as well as targeted flights over multiple German cities including Cologne, Mönchengladbach, Düsseldorf, Aachen, Frankfurt, but also over industrial areas and highways. Vertical profiles of trace gases were obtained during the airship landing and take-off. Diurnal variability of the Zeppelin vertical profiles was compared to measurements from ground-based monitoring stations with a focus on nitrogen oxides and ozone. We find that their variability can be explained by the increasing nocturnal boundary layer height from early morning towards midday, an increase in emissions during rush hour traffic, and the rapid photochemical activity midday. Higher altitude (250–450 m) NOX to CO ratios are further compared to the 2015 EDGAR emission inventory to find that pollutant concentrations are influenced by transportation and residential emissions as well as manufacturing industries and construction activity. Finally, we report NOx and CO concentrations from one plume transect originating from a coal power plant and compare it to the EURAD-IM model to find agreement within 15%. However, due to the increased contribution of solar and wind energy and/or the impact of lockdown measures the power plant was operated at max. 50% capacity; therefore, possible overestimation of emissions by the model cannot be excluded. [ABSTRACT FROM AUTHOR]

An updated and expanded representation of organics in the chemistry general circulation model EMAC (ECHAM5/MESSy for Atmospheric Chemistry) has been evaluated. First, the comprehensive Mainz Organic Mechanism (MOM) in the submodel MECCA (Module Efficiently Calculating the Chemistry of the Atmosphere) was activated with explicit degradation of organic species up to five carbon atoms and a simplified mechanism for larger molecules. Second, the ORACLE submodel (version 1.0) considers now condensation on aerosols for all organics in the mechanism. Parameterizations for aerosol yields are used only for the lumped species that are not included in the explicit mechanism. The simultaneous usage of MOM and ORACLE allows an efficient estimation, not only of the chemical degradation of the simulated volatile organic compounds, but also of the contribution of organics to the growth and fate of (organic) aerosol, with a complexity of the mechanism largely increased compared to EMAC simulations with more simplified chemistry. The model evaluation presented here reveals that the OH concentration is well reproduced globally, while significant biases for observed oxygenated organics are present. We also investigate the general properties of the aerosols and their composition, showing that the more sophisticated and process-oriented secondary aerosol formation does not degrade the good agreement of previous model configurations with observations at the surface, allowing further research in the field of gas-aerosol interactions. [ABSTRACT FROM AUTHOR]

The oxidation of Δ3 -carene and one of its main oxidation products, caronaldehyde, by the OH radical and O3 was investigated in the atmospheric simulation chamber SAPHIR under atmospheric conditions for NOx mixing ratios below 2 ppbv. Within this study, the rate constants of the reaction of Δ3 -carene with OH and O3 and of the reaction of caronaldehyde with OH were determined to be (8.0±0.5)×10-11 cm3s-1 at 304 K , (4.4±0.2)×10-17 cm3s-1 at 300 K and (4.6±1.6)×10-11 cm3s-1 at 300 K , in agreement with previously published values. The yields of caronaldehyde from the reaction of OH and ozone with Δ3 -carene were determined to be 0.30±0.05 and 0.06±0.02 , respectively. Both values are in reasonably good agreement with reported literature values. An organic nitrate (RONO2) yield from the reaction of NO with RO2 derived from Δ3 -carene of 0.25±0.04 was determined from the analysis of the reactive nitrogen species (NO y) in the SAPHIR chamber. The RONO2 yield of the reaction of NO with RO2 derived from the reaction of caronaldehyde with OH was found to be 0.10±0.02. The organic nitrate yields of Δ3 -carene and caronaldehyde oxidation with OH are reported here for the first time in the gas phase. An OH yield of 0.65±0.10 was determined from the ozonolysis of Δ3 -carene. Calculations of production and destruction rates of the sum of hydroxyl and peroxy radicals (ROx=OH+HO2+RO2) demonstrated that there were no unaccounted production or loss processes of radicals in the oxidation of Δ3 -carene for conditions of the chamber experiments. In an OH -free experiment with added OH scavenger, the photolysis frequency of caronaldehyde was obtained from its photolytical decay. The experimental photolysis frequency was a factor of 7 higher than the value calculated from the measured solar actinic flux density, an absorption cross section from the literature and an assumed effective quantum yield of unity for photodissociation. [ABSTRACT FROM AUTHOR]

It is being suggested that particle-bound or particle-induced reactive oxygen species (ROS), which significantly contribute to the oxidative potential (OP) of aerosol particles, are a promising metric linking aerosol compositions to toxicity and adverse health effects. However, accurate ROS quantification remains challenging due to the reactive and short-lived nature of many ROS components and the lack of appropriate analytical methods for a reliable quantification. Consequently, it remains difficult to gauge their impact on human health, especially to identify how aerosol particle sources and atmospheric processes drive particle-bound ROS formation in a real-world urban environment. In this study, using a novel online particle-bound ROS instrument (OPROSI), we comprehensively characterized and compared the formation of ROS in secondary organic aerosols (SOA) generated from organic compounds that represent anthropogenic (naphthalene, SOANAP) and biogenic (β-pinene, SOAβPIN) precursors. The SOA mass was condensed onto soot particles (SP) under varied atmospherically relevant conditions (photochemical aging and humidity). We systematically analysed the ability of the aqueous extracts of the two aerosol types (SOANAP-SP and SOAβPIN-SP) to induce ROS production and OP. We further investigated cytotoxicity and cellular ROS production after exposing human lung epithelial cell cultures (A549) to extracts of the two aerosols. A significant finding of this study is that more than 90% of all ROS components in both SOA types have a short lifetime, highlighting the need to develop online instruments for a meaningful quantification of ROS. Our results also show that photochemical aging promotes particle-bound ROS production and enhances the OP of the aerosols. Compared to SOAβPIN-SP, SOANAP-SP elicited a higher acellular and cellular ROS production, a higher OP and a lower cell viability. These consistent results between chemical-based and biological-based analyses indicate that particle-bound ROS quantification could be a feasible metric to predict aerosol particle toxicity and adverse human effects. Moreover, the cellular ROS production caused by SOA exposure not only depends on aerosol type, but is also affected by exposure dose, highlighting a need to mimic the process of particle deposition onto lung cells and their interactions as realistically as possible to avoid unknown biases. [ABSTRACT FROM AUTHOR]

Isoprene oxidation by nitrate radical (NO 3) is a potentially important source of secondary organic aerosol (SOA). It is suggested that the second or later-generation products are the more substantial contributors to SOA. However, there are few studies investigating the multi-generation chemistry of isoprene-NO 3 reaction, and information about the volatility of different isoprene nitrates, which is essential to evaluate their potential to form SOA and determine their atmospheric fate, is rare. In this work, we studied the reaction between isoprene and NO 3 in the SAPHIR chamber (Jülich) under near-atmospheric conditions. Various oxidation products were measured by a high-resolution time-of-flight chemical ionization mass spectrometer using Br - as the reagent ion. Most of the products detected are organic nitrates, and they are grouped into monomers (C 4 and C 5 products) and dimers (C 10 products) with 1–3 nitrate groups according to their chemical composition. Most of the observed products match expected termination products observed in previous studies, but some compounds such as monomers and dimers with three nitrogen atoms were rarely reported in the literature as gas-phase products from isoprene oxidation by NO 3. Possible formation mechanisms for these compounds are proposed. The multi-generation chemistry of isoprene and NO 3 is characterized by taking advantage of the time behavior of different products. In addition, the vapor pressures of diverse isoprene nitrates are calculated by different parametrization methods. An estimation of the vapor pressure is also derived from their condensation behavior. According to our results, isoprene monomers belong to intermediate-volatility or semi-volatile organic compounds and thus have little effect on SOA formation. In contrast, the dimers are expected to have low or extremely low volatility, indicating that they are potentially substantial contributors to SOA. However, the monomers constitute 80 % of the total explained signals on average, while the dimers contribute less than 2 %, suggesting that the contribution of isoprene NO 3 oxidation to SOA by condensation should be low under atmospheric conditions. We expect a SOA mass yield of about 5 % from the wall-loss- and dilution-corrected mass concentrations, assuming that all of the isoprene dimers in the low- or extremely low-volatility organic compound (LVOC or ELVOC) range will condense completely. [ABSTRACT FROM AUTHOR]

Highly oxygenated organic molecules (HOM) are found to play an important role in the formation and growth of secondary organic aerosol (SOA). SOA is an important type of aerosol with significant impact on air quality and climate. Compared with the oxidation of volatile organic compounds by ozone (O 3) and hydroxyl radical (OH), HOM formation in the oxidation by nitrate radical (NO 3), an important oxidant at nighttime and dawn, has received less attention. In this study, HOM formation in the reaction of isoprene with NO 3 was investigated in the SAPHIR chamber (Simulation of Atmospheric PHotochemistry In a large Reaction chamber). A large number of HOM, including monomers (C 5), dimers (C 10), and trimers (C 15), both closed-shell compounds and open-shell peroxy radicals (RO 2), were identified and were classified into various series according to their formula. Their formation pathways were proposed based on the peroxy radicals observed and known mechanisms in the literature, which were further constrained by the time profiles of HOM after sequential isoprene addition to differentiate first- and second-generation products. HOM monomers containing one to three N atoms (1–3N-monomers) were formed, starting with NO 3 addition to carbon double bond, forming peroxy radicals, followed by autoxidation. 1N-monomers were formed by both the direct reaction of NO 3 with isoprene and of NO 3 with first-generation products. 2N-monomers (e.g., C 5 H 8 N 2 O n(n=7–13) , C 5 H 10 N 2 O n(n=8–14)) were likely the termination products of C 5 H 9 N 2 O n⚫ , which was formed by the addition of NO 3 to C5-hydroxynitrate (C 5 H 9 NO 4), a first-generation product containing one carbon double bond. 2N-monomers, which were second-generation products, dominated in monomers and accounted for ∼34 % of all HOM, indicating the important role of second-generation oxidation in HOM formation in the isoprene + NO 3 reaction under our experimental conditions. H shift of alkoxy radicals to form peroxy radicals and subsequent autoxidation ("alkoxy–peroxy" pathway) was found to be an important pathway of HOM formation. HOM dimers were mostly formed by the accretion reaction of various HOM monomer RO 2 and via the termination reactions of dimer RO 2 formed by further reaction of closed-shell dimers with NO 3 and possibly by the reaction of C5–RO 2 with isoprene. HOM trimers were likely formed by the accretion reaction of dimer RO 2 with monomer RO 2. The concentrations of different HOM showed distinct time profiles during the reaction, which was linked to their formation pathway. HOM concentrations either showed a typical time profile of first-generation products, second-generation products, or a combination of both, indicating multiple formation pathways and/or multiple isomers. Total HOM molar yield was estimated to be 1.2 % -0.7%+1.3% , which corresponded to a SOA yield of ∼3.6 % assuming the molecular weight of C 5 H 9 NO 6 as the lower limit. This yield suggests that HOM may contribute a significant fraction to SOA yield in the reaction of isoprene with NO 3. [ABSTRACT FROM AUTHOR]

Three instruments that use different techniques to measure gaseous formaldehyde (HCHO) concentrations were compared in experiments in the atmospheric simulation chamber SAPHIR at Forschungszentrum Jülich. One instrument (AL4021, Aero-Laser GmbH) detects HCHO using the wet-chemical Hantzsch reaction (for efficient gas-phase stripping), chemical conversion and fluorescence measurement. An internal HCHO permeation source allows for daily calibrations. This instrument was characterized by sulfuric acid titration (overall accuracy 8.6 %) and yields measurements with a time resolution of 90 s and a limit of detection (3 σ) of 0.3 ppbv. In addition, a new commercial instrument that makes use of cavity ring-down spectroscopy (CRDS) determined the concentrations of HCHO , water vapour, and methane (G2307, Picarro, Inc.). Its limit of detection (3 σ) is specified as 0.3 ppbv for an integration time of 300 s , and its accuracy is limited by the drift of the zero signal (manufacturer specification 1.5 ppbv). A custom-built high-resolution laser differential optical absorption spectroscopy (DOAS) instrument provided HCHO measurements with a limit of detection (3 σ) of 0.9 ppbv and an accuracy of 7 %​​​​​​​ using an optical multiple reflection cell. The measurements were conducted from June to December 2019 in experiments in which either ambient air flowed through the chamber or the photochemical degradation of organic compounds in synthetic air was investigated. Measured HCHO concentrations were up to 8 ppbv. Various mixtures of organic compounds, water vapour, nitrogen oxides and ozone were present in these experiments. Results demonstrate the need to correct the baseline in measurements performed by the Hantzsch instrument to compensate for drifting background signals. Corrections were equivalent to HCHO mixing ratios in the range of 0.5–1.5 ppbv. The baseline of the CRDS instrument showed a linear dependence on the water vapour mixing ratio with a slope of (-11.20±1.60) ppbv % -1 below and (-0.72±0.08) ppbv % -1 above a water vapour mixing ratio of 0.2 %. In addition, the intercepts of these linear relationships drifted within the specification of the instrument (1.5 ppbv) over time but appeared to be equal for all water mixing ratios. Regular zero measurements are needed to account for the changes in the instrument zero. After correcting for the baselines of measurements by the Hantzsch and the CRDS instruments, linear regression analysis of measurements from all three instruments in experiments with ambient air indicated good agreement, with slopes of between 0.98 and 1.08 and negligible intercepts (linear correlation coefficients R2>0.96). The new small CRDS instrument measures HCHO with good precision and is accurate if the instrument zero is taken into account. Therefore, it can provide measurements with similar accuracy to the DOAS instrument but with slightly reduced precision compared to the Hantzsch instrument. [ABSTRACT FROM AUTHOR]

The oxidation of A[sup 3]-carene and one of its main oxidation products, caronaldehyde, by the OH radical and O3 was investigated in the atmospheric simulation chamber SAPHIR under atmospheric conditions for NO[sub x] mixing ratios below 2ppbv. Within this study, the rate constants of the reaction of A[sup 3]-carene with OH and O[sub 3], and of the reaction of caronaldehyde with OH were determined to be (8.0 ± 0.5) x 10[sup -11] cm[sup 3]s[sup -1] at 304 K, (4.4 ± 0.2) x 10[sup -17] cm[sup 3]s[sup -1] at 300 K and (4.6 ± 1.6) x 10[sup -11] cm[sup 3]s[sup -1] at 300 K, respectively, in agreement with previously published values. The yields of caronaldehyde from the reaction of OH and ozone with A[sup 3]-carene were determined to be (0.30±0.05) and (0.06±0.02), respectively. Both values are in reasonably well agreement with reported literature values. An organic nitrate (RONO[sub 2]) yield from the reaction of NO with RO[sub 2] derived from A[sup 3]-carene of (0.25 ± 0.04) was determined from the analysis of the reactive nitrogen species (NOy) in the SAPHIR chamber. The RONO[sub 2] yield of the reaction of NO with RO[sub 2] derived from the reaction of caronaldehyde with OH was found to be (0.10±0.02). The organic nitrate yields of A[sup 3]-carene and caronaldehyde oxidation with OH are reported here for the first time in the gas phase. An OH yield of (0.65±0.10) was determined from the ozonolysis of A[sup 3]-carene. Calculations of production and destruction rates of the sum of hydroxyl and peroxy radicals (ROx = OH+HO[sub 2]+RO[sub 2]) demonstrated that there were no unaccounted production or loss processes of radicals in the oxidation of A[sup 3] -carene for conditions of the the chamber experiments. In an OH free experiment with added OH scavenger, the photolysis frequency of caronaldehyde was obtained from its photolytical decay. The experimental photolysis frequency was a factor of 7 higher than the value calculated from the measured solar acintic flux density, an absorption cross section from the literature and an assumed effective quantum yield of unity for photodissociation. [ABSTRACT FROM AUTHOR]

We report the first-time use of the Lagrangian particle dispersion model (LPDM) FLEXPART to simulate isotope ratios of the biomass burning tracer levoglucosan. Here, we combine the model results with observed levoglucosan concentrations and δ13 C to assess the contribution of local vs. remote emissions from firewood domestic heating to the particulate matter sampled during the cold season at two measurements stations of the Environmental Agency of North Rhine-Westphalia, Germany. For the investigated samples, the simulations indicate that the largest part of the sampled aerosol is 1 to 2 d old and thus originates from local to regional sources. Consequently, ageing, also limited by the reduced photochemical activity in the dark cold season, has a minor influence on the observed levoglucosan concentration and δ13 C. The retro plume ages agree well with those derived from observed δ13 C (the "isotopic" ages), demonstrating that the limitation of backwards calculations to 7 d for this study does not introduce any significant bias. A linear regression analysis applied to the experimental levoglucosan δ13 C vs. the inverse concentration confirms the young age of aerosol. The high variability in the observed δ13 C implies that the local levoglucosan emissions are characterized by different isotopic ratios in the range of -26.3 ‰ to -21.3 ‰. These values are in good agreement with previous studies on levoglucosan source-specific isotopic composition in biomass burning aerosol. Comparison between measured and estimated levoglucosan concentrations suggests that emissions are underestimated by a factor of 2 on average. These findings demonstrate that the aerosol burden from home heating in residential areas is not of remote origin. In this work we show that combining Lagrangian modelling with isotope ratios is valuable to obtain additional insight into source apportionment. Error analysis shows that the largest source of uncertainty is limited information on isotope ratios of levoglucosan emissions. Based on the observed low extent of photochemical processing during the cold season, levoglucosan can be used under similar conditions as a conservative tracer without introducing substantial bias. [ABSTRACT FROM AUTHOR]

Precise and accurate hydroxyl radical (OH) measurements are essential to investigate mechanisms for oxidation and transformation of trace gases and processes leading to the formation of secondary pollutants like ozone (O3) in the troposphere. Laser-induced fluorescence (LIF) is a widely used technique for the measurement of ambient OH radicals and was used for the majority of field campaigns and chamber experiments. Recently, most LIF instruments in use for atmospheric measurements of OH radicals introduced chemical modulation to separate the ambient OH radical concentration from possible interferences by chemically removing ambient OH radicals before they enter the detection cell (Mao et al., 2012; Novelli et al., 2014a). In this study, we describe the application and characterization of a chemical modulation reactor (CMR) applied to the Forschungszentrum Jülich LIF (FZJ-LIF) instrument in use at the atmospheric simulation chamber SAPHIR (Simulation of Atmospheric PHotochemistry In a large Reaction Chamber). Besides dedicated experiments in synthetic air, the new technique was extensively tested during the year-round Jülich Atmospheric Chemistry Project (JULIAC) campaign, in which ambient air was continuously flowed into the SAPHIR chamber. It allowed for performing OH measurement comparisons with differential optical absorption spectroscopy (DOAS) and investigation of interferences in a large variety of chemical and meteorological conditions. Good agreement was obtained in the LIF–DOAS intercomparison within instrumental accuracies (18 % for LIF and 6.5 % for DOAS) which confirms that the new chemical modulation system of the FZJ-LIF instrument is suitable for measurement of interference-free OH concentrations under the conditions of the JULIAC campaign (rural environment). Known interferences from O3+H2O and the nitrate radical (NO3) were quantified with the CMR in synthetic air in the chamber and found to be 3.0×105 and 0.6×105 cm -3 , respectively, for typical ambient-air conditions (O3=50 ppbv, H2O = 1 % and NO3=10 pptv). The interferences measured in ambient air during the JULIAC campaign in the summer season showed a median diurnal variation with a median maximum value of 0.9×106 cm -3 during daytime and a median minimum value of 0.4×106 cm -3 at night. The highest interference of 2×106 cm -3 occurred in a heat wave from 22 to 29 August, when the air temperature and ozone increased to 40 ∘ C and 100 ppbv, respectively. All observed interferences could be fully explained by the known O3+H2O interference, which is routinely corrected in FZJ-LIF measurements when no chemical modulation is applied. No evidence for an unexplained interference was found during the JULIAC campaign. A chemical model of the CMR was developed and applied to estimate the possible perturbation of the OH transmission and scavenging efficiency by reactive atmospheric trace gases. These can remove OH by gas phase reactions in the CMR or produce OH by non-photolytic reactions, most importantly by the reaction of ambient HO2 with NO. The interfering processes become relevant at high atmospheric OH reactivities. For the conditions of the JULIAC campaign with OH reactivities below 20 s -1 , the influence on the determination of ambient OH concentrations was small (on average: 2 %). However, in environments with high OH reactivities, such as in a rain forest or megacity, the expected perturbation in the currently used chemical modulation reactor could be large (more than a factor of 2). Such perturbations need to be carefully investigated and corrected for the proper evaluation of OH concentrations when applying chemical scavenging. This implies that chemical modulation, which was developed to eliminate interferences in ambient OH measurements, itself can be subject to interferences that depend on ambient atmospheric conditions. [ABSTRACT FROM AUTHOR]

Aromatic hydrocarbons are a class of volatile organic compounds associated with anthropogenic activity and make up a significant fraction of urban volatile organic compound (VOC) emissions that contribute to the formation of secondary organic aerosol (SOA). Benzene is one of the most abundant species emitted from vehicles, biomass burning and industry. An iodide time-of-flight chemical ionisation mass spectrometer (ToF-CIMS) and nitrate ToF-CIMS were deployed at the Jülich Plant Atmosphere Chamber as part of a series of experiments examining benzene oxidation by OH under high- and low-NO x conditions, where a range of organic oxidation products were detected. The nitrate scheme detects many oxidation products with high masses, ranging from intermediate volatile organic compounds (IVOCs) to extremely low volatile organic compounds (ELVOCs), including C 12 dimers. In comparison, very few species with C ≥6 and O ≥8 were detected with the iodide scheme, which detected many more IVOCs and semi-volatile organic compounds (SVOCs) but very few ELVOCs and low volatile organic compounds (LVOCs). A total of 132 and 195 CHO and CHON oxidation products are detected by the iodide ToF-CIMS in the low- and high-NO x experiments respectively. Ring-breaking products make up the dominant fraction of detected signal and 21 and 26 of the products listed in the Master Chemical Mechanism (MCM) were detected. The time series of highly oxidised (O ≥6) and ring-retaining oxidation products (C 6 and double-bond equivalent = 4) equilibrate quickly, characterised by a square form profile, compared to MCM and ring-breaking products which increase throughout oxidation, exhibiting sawtooth profiles. Under low-NO x conditions, all CHO formulae attributed to radical termination reactions of first-generation benzene products, and first-generation auto-oxidation products are observed. Several N-containing species that are either first-generation benzene products or first-generation auto-oxidation products are also observed under high-NO x conditions. Hierarchical cluster analysis finds four clusters, of which two describe photo-oxidation. Cluster 2 shows a negative dependency on the NO2/NOx ratio, indicating it is sensitive to NO concentration and thus likely to contain NO addition products and alkoxy-derived termination products. This cluster has the highest average carbon oxidation state (OSC‾) and the lowest average carbon number. Where nitrogen is present in a cluster member of cluster 2, the oxygen number is even, as expected for alkoxy-derived products. In contrast, cluster 1 shows no dependency on the NO2/NOx ratio and so is likely to contain more NO 2 addition and peroxy-derived termination products. This cluster contains fewer fragmented species, as the average carbon number is higher and OSC‾ lower than cluster 2, and more species with an odd number of oxygen atoms. This suggests that clustering of time series which have features pertaining to distinct chemical regimes, for example, NO2/NOx perturbations, coupled with a priori knowledge, can provide insight into identification of potential functionality. [ABSTRACT FROM AUTHOR]

Heterogeneous uptake of hydroperoxyl radicals (HO 2) onto aerosols has been proposed to be a significant sink of HO x , hence impacting the atmospheric oxidation capacity. Accurate calculation of the HO 2 uptake coefficient γHO2 is key to quantifying the potential impact of this atmospheric process. Laboratory studies show that γHO2 can vary by orders of magnitude due to changes in aerosol properties, especially aerosol soluble copper (Cu) concentration and aerosol liquid water content (ALWC). In this study we present a state-of-the-art model called MARK to simulate both gas- and aerosol-phase chemistry for the uptake of HO 2 onto Cu-doped aerosols. Moreover, a novel parameterization of HO 2 uptake was developed that considers changes in relative humidity (RH) and condensed-phase Cu ion concentrations and which is based on a model optimization using previously published and new laboratory data included in this work. This new parameterization will be applicable to wet aerosols, and it will complement current IUPAC recommendations. The new parameterization is as follows (the explanations for symbols are in the Appendix): 1 γ HO 2 = 1 α HO 2 + 3 × υ HO 2 4 × 10 6 × R d H corr RT × (5.87 + 3.2 × ln⁡ (ALWC / [ PM ] + 0.067)) × [ PM ] - 0.2 × Cu 2 + eff 0.65 + υ HO 2 l 4RTH org D org ε . All parameters used in the paper are summarized in Table A1. Using this new equation, field data from a field campaign were used to evaluate the impact of the HO 2 uptake onto aerosols on the RO x (= OH + HO 2 + RO 2) budget. Highly variable values for HO 2 uptake were obtained for the North China Plain (median value < 0.1). [ABSTRACT FROM AUTHOR]

Isoprene oxidation by nitrate radical (NO3) is a potentially important source of secondary organic aerosol (SOA). It is suggested that the second or later-generation products are the more substantial contributors to SOA. However, there are few studies investigating the multi-generation chemistry of isoprene-NO3 reaction, and information about the volatility of different isoprene nitrates, which is essential to evaluate their potential to form SOA and determine their atmospheric fate, is rare. In this work, we studied the reaction between isoprene and NO3 in the SAPHIR chamber (Jülich) under near atmospheric conditions. Various oxidation products were measured by a high-resolution time-of-flight chemical ionization mass spectrometer using Br− as the reagent ion. They are grouped into monomers (C4- and C5-products), and dimers (C10-products) with 1–3 nitrate groups according to their chemical composition. Most of the observed products match expected termination products observed in previous studies, but some compounds such as monomers and dimers with three nitrogen atoms were rarely reported in the literature as gas-phase products from isoprene oxidation by NO3. Possible formation mechanisms for these compounds are proposed. The multi-generation chemistry of isoprene and NO3 is characterized by taking advantages of the time behavior of different products. In addition, the vapor pressures of diverse isoprene nitrates are calculated by different parametrization methods. An estimation of the vapor pressure is also derived from their condensation behavior. According to our results, isoprene monomers belong to intermediate volatility or semi-volatile organic compounds and thus have little effect on SOA formation. In contrast, the dimers are expected to have low or extremely low volatility, indicating that they are potentially substantial contributors to SOA. However, the monomers constitute 80 % of the total explained signals on average, while the dimers contribute less than 2 %, suggesting that the contribution of isoprene NO3 oxidation to SOA by condensation should be low under atmospheric conditions. We expect a SOA mass yield of about 5 % from the wall loss and dilution corrected mass concentrations, assuming that all of the isoprene dimers in the low- or extremely low-volatility organic compound (LVOC or ELVOC) range will condense completely. [ABSTRACT FROM AUTHOR]

Isoprene oxidation by nitrate radical (NO3) is a potentially important source of secondary organic aerosol (SOA). It is suggested that the second or later-generation products are the more substantial contributors to SOA. However, there are few studies investigating the multi-generation chemistry of isoprene-NO3 reaction, and information about the volatility of different isoprene nitrates, which is essential to evaluate their potential to form SOA and determine their atmospheric fate, is rare. In this work, we studied the reaction between isoprene and NO3 in the SAPHIR chamber (Jülich) under near atmospheric conditions. Various oxidation products were measured by a high-resolution time-of-flight chemical ionization mass spectrometer using Br- as the reagent ion. They are grouped into monomers (C4- and C5-products), and dimers (C10-products) with 1-3 nitrate groups according to their chemical composition. Most of the observed products match expected termination products observed in previous studies, but some compounds such as monomers and dimers with three nitrogen atoms were rarely reported in the literature as gas-phase products from isoprene oxidation by NO3. Possible formation mechanisms for these compounds are proposed. The multi-generation chemistry of isoprene and NO3 is characterized by taking advantages of the time behavior of different products. In addition, the vapor pressures of diverse isoprene nitrates are calculated by different parametrization methods. An estimation of the vapor pressure is also derived from their condensation behavior. According to our results, isoprene monomers belong to intermediate volatility or semi-volatile organic compounds and thus have little effect on SOA formation. In contrast, the dimers are expected to have low or extremely low volatility, indicating that they are potentially substantial contributors to SOA. However, the monomers constitute 80 % of the total explained signals on average, while the dimers contribute less than 2 %, suggesting that the contribution of isoprene NO3 oxidation to SOA by condensation should be low under atmospheric conditions. We expect a SOA mass yield of about 5 % from the wall loss and dilution corrected mass concentrations, assuming that all of the isoprene dimers in the low- or extremely low- volatility organic compound (LVOC or ELVOC) range will condense completely. [ABSTRACT FROM AUTHOR]

Highly oxygenated organic molecules (HOM) are found to play an important role in the formation and growth of secondary organic aerosol (SOA). SOA is an important type of aerosol with significant impact on air quality and climate. Compared with the oxidation of volatile organic compounds by O3 and OH, HOM formation in the oxidation by NO3 radical, an important oxidant at night-time and dawn, has received less attention. In this study, HOM formation in the reaction of isoprene with NO3 was investigated in the SAPHIR chamber (Simulation of Atmospheric PHotochemistry In a large Reaction chamber). A large number of HOM including monomers (C5), dimers (C10), and trimers (C15), both closed-shell compounds and open-shell peroxy radicals, were identified and were classified into various series according to their formula. Their formation pathways were proposed based on the peroxy radicals observed and known mechanisms in the literature, which were further constrained by the time profiles of HOM after sequential isoprene addition to differentiate first- and second-generation products. HOM monomers containing one to three N atoms (1-3N monomers) were formed, starting with NO3 addition to carbon double bond, forming peroxy radicals (RO2), followed by autoxidation. 1N monomers were formed by both the direct reaction of NO3 with isoprene and of NO3 with first-generation products. 2N-monomers (e.g. C5H8N2On (n = 8-13), C5H10N2On (n = 8-14)) were likely the termination products of C5H9N2On•, which was formed by the addition of NO3 to C5-hydroxynitrate (C5H9NO4), a first-generation product containing one carbon double bond. 2N-monomers, which were second-generation products, dominated in monomers and accounted for ~34 % of all HOM, indicating the important role of second-generation oxidation in HOM formation in isoprene+NO3 under our reaction conditions. H-shift of alkoxy radicals to form peroxy radicals and subsequent autoxidation ("alkoxy-peroxy" pathway) was found to be an important pathway of HOM formation. HOM dimers were mostly formed by the accretion reaction of various HOM monomer RO2 and via the termination reactions of dimer RO2 formed by further reaction of closed-shell dimers with NO3 and possibly by the reaction of C5-RO2 with isoprene. HOM trimers were likely formed by the accretion reaction of dimer RO2 with monomer RO2. The concentrations of different HOM showed distinct time profiles during the reaction, which was linked to their formation pathway. HOM concentrations either showed a typical time profile of first-generation products, or of second-generation products, or a combination of both, indicating multiple formation pathways and/or multiple isomers. Total HOM molar yield was estimated to be 1.2 %+1.3 %-0.7 %, which corresponded to a SOA yield of ~3.6 % assuming the molecular weight of C5H9NO6 as the lower limit. This yield suggests that HOM may contribute a significant fraction to SOA yield in the reaction of isoprene with NO3. [ABSTRACT FROM AUTHOR]

We report the first-time use of the Lagrangian Particle Dispersion Model (LPDM) FLEXPART to simulate isotope ratios of the biomass burning tracer levoglucosan. Here, we combine the model results with observed levoglucosan concentrations and δ13C to assess the contribution of local vs. remote emissions from firewood domestic heating to the particulate matter sampled during the cold season at two measurements stations of the Environmental Agency of North Rhine-Westphalia, Germany. For the investigated samples, the simulations indicate that the largest part of the sampled aerosol is 1 to 2 days old, and thus originates from local to regional sources. Consequently, photo-chemical aging, also limited by low mean OH concentrations in the cold season, has a minor influence the observed levoglucosan concentration and δ13C. The retro plume ages agree well with those derived from observed δ13C, (the "isotopic" ages), demonstrating that the limitation of backwards calculations to seven days for this study doesn't introduce any significant bias. A linear regression analysis applied to the experimental levoglucosan δ13C vs. the inverse concentration confirms the young age of aerosol. The high variability in the observed δ13C implies that the local levoglucosan emissions are characterized by very different isotopic ratios in the range of - 25.3 to -21.4 ‰. These values are in good agreement with previous studies on levoglucosan source specific isotopic composition in biomass burning aerosol. Comparison between measured and estimated levoglucosan concentrations suggest that emissions are underestimated by a factor of two on average. These findings demonstrate that the aerosol burden from home heating in residential areas is not of remote origin and thus it can be mitigated by reducing local emissions. In this work we show that combining Lagrangian modelling with isotope ratios is valuable to obtain additional insight in source apportionment. Error analysis shows that the largest source of uncertainty is limited information on isotope ratios of levoglucosan emissions. Based on the observed low extent of photochemical processing during cold season, levoglucosan can be used under similar conditions as a conservative tracer without introducing substantial bias. [ABSTRACT FROM AUTHOR]

The photooxidation of pinonaldehyde, one product of the α -pinene degradation, was investigated in the atmospheric simulation chamber SAPHIR under natural sunlight at low NO concentrations (<0.2 ppbv) with and without an added hydroxyl radical (OH) scavenger. With a scavenger, pinonaldehyde was exclusively removed by photolysis, whereas without a scavenger, the degradation was dominated by reaction with OH. In both cases, the observed rate of pinonaldehyde consumption was faster than predicted by an explicit chemical model, the Master Chemical Mechanism (MCM, version 3.3.1). In the case with an OH scavenger, the observed photolytic decay can be reproduced by the model if an experimentally determined photolysis frequency is used instead of the parameterization in the MCM. A good fit is obtained when the photolysis frequency is calculated from the measured solar actinic flux spectrum, absorption cross sections published by , and an effective quantum yield of 0.9. The resulting photolysis frequency is 3.5 times faster than the parameterization in the MCM. When pinonaldehyde is mainly removed by reaction with OH, the observed OH and hydroperoxy radical (HO2) concentrations are underestimated in the model by a factor of 2. Using measured HO2 as a model constraint brings modeled and measured OH concentrations into agreement. This suggests that the chemical mechanism includes all relevant OH-producing reactions but is missing a source for HO2. The missing HO2 source strength of (0.8 to 1.5) ppbvh-1 is similar to the rate of the pinonaldehyde consumption of up to 2.5 ppbvh-1. When the model is constrained by HO2 concentrations and the experimentally derived photolysis frequency, the pinonaldehyde decay is well represented. The photolysis of pinonaldehyde yields 0.18 ± 0.20 formaldehyde molecules at NO concentrations of less than 200 pptv , but no significant acetone formation is observed. When pinonaldehyde is also oxidized by OH under low NO conditions (maximum 80 pptv), yields of acetone and formaldehyde increase over the course of the experiment from 0.2 to 0.3 and from 0.15 to 0.45, respectively. proposed a degradation mechanism based on quantum-chemical calculations, which is considerably more complex than the MCM scheme and contains additional reaction pathways and products. Implementing these modifications results in a closure of the model–measurement discrepancy for the products acetone and formaldehyde, when pinonaldehyde is degraded only by photolysis. In contrast, the underprediction of formed acetone and formaldehyde is worsened compared to model results by the MCM, when pinonaldehyde is mainly degraded in the reaction with OH. This shows that the current mechanisms lack acetone and formaldehyde sources for low NO conditions like in these experiments. Implementing the modifications suggested by does not improve the model–measurement agreement of OH and HO2. [ABSTRACT FROM AUTHOR]

Precise and accurate hydroxyl radical (OH) measurements are essential to investigate how trace gases are oxidized and transformed in the troposphere and how secondary pollutants like ozone (O3) are formed. Laser induced fluorescence (LIF) is a widely used technique for the measurement of ambient OH radicals and was used for the majority of field campaigns and chamber experiments. Recently, most LIF instruments in use for atmospheric measurements of OH radicals introduced chemical modulation to separate the ambient OH radical concentration from possible interferences by chemically removing ambient OH radicals before they enter the detection cell. In this study, we describe the application, characterization, and validation of a chemical modulation reactor (CMR) applied to the Forschungszentrum Jülich LIF (FZJ-LIF) instrument in use at the atmospheric simulation chamber SAPHIR. Besides dedicated experiments in synthetic air, the new technique was extensively tested during the year- round Jülich Atmospheric Chemistry Project (JULIAC) campaign, in which ambient air was continuously flowed into the SAPHIR chamber. It allowed performing OH measurement comparisons with Differential Optical Absorption Spectroscopy (DOAS) and investigation of interferences in a large variety of chemical and meteorological conditions. A good agreement was obtained in the LIF DOAS intercomparison within instrumental accuracies (18 % for LIF, 6.5 % for DOAS) which confirms that the new chemical modulation system of the FZJ-LIF instrument is suitable for measurement of interference-free OH concentrations. Known interferences from O3 + H2O and the nitrate radical (NO3) were quantified with the CMR in synthetic air in the chamber and found to be 3.0 x 105 cm-3 and 0.6 x 105 cm-3, respectively, for typical ambient air condition (O3 = 50 ppbv, H2O = 1 %, NO3 = 10 pptv). The interferences measured in ambient air during the JULIAC campaign in summer season had the median diurnal variation of the interference with a maximum daytime value of 0.9 x 106 cm-3 and a minimum nighttime value of 0.4 x 106 cm-3. The highest interference of 2 x 106 cm-3 occurred in a heat wave from 22-29 August, when the air temperature and ozone increased to 40 °C and 100 ppbv, respectively. All observed interferences could be fully explained by the known O3 + H2O interference, which is routinely corrected in FZJ-LIF measurements when no chemical modulation is applied. No evidence for unexplained interference was found during the JULIAC campaign. A kinetic chemical model of the chemical modulation reactor was developed and applied to estimate the possible perturbation of the OH transmission and scavenging efficiency by reactive atmospheric trace gases. These can remove OH by gas phase reactions in the reactor, or produce OH by non-photolytical reactions, most importantly by the reaction of ambient HO2 with NO. The interfering processes become relevant at high atmospheric OH reactivities. For the conditions of the JULIAC campaign with OH reactivities below 20 s-1, the influence on the determination of ambient OH concentrations was small (on average: 2 %). However, in environments with high OH reactivities, such as in a rain forest or megacity, the expected perturbation in the currently used chemical modulation reactor could be large (more than a factor of 2) and would need careful analysis and correction. This implies that chemical modulation, which was developed to eliminate interferences in ambient OH measurements, itself can be subject to interferences that depend on ambient atmospheric conditions. [ABSTRACT FROM AUTHOR]

The formation of organic nitrates (ONs) in the gas phase and their impact on mass formation of secondary organic aerosol (SOA) was investigated in a laboratory study for α -pinene and β -pinene photooxidation. Focus was the elucidation of those mechanisms that cause the often observed suppression of SOA mass formation by NOx , and therein the role of highly oxygenated multifunctional molecules (HOMs). We observed that with increasing NOx concentration (a) the portion of HOM organic nitrates (HOM-ONs) increased, (b) the fraction of accretion products (HOM-ACCs) decreased, and (c) HOM-ACCs contained on average smaller carbon numbers. Specifically, we investigated HOM organic nitrates (HOM-ONs), arising from the termination reactions of HOM peroxy radicals with NOx , and HOM permutation products (HOM-PPs), such as ketones, alcohols, or hydroperoxides, formed by other termination reactions. Effective uptake coefficients γeff of HOMs on particles were determined. HOMs with more than six O atoms efficiently condensed on particles (γeff>0.5 on average), and for HOMs containing more than eight O atoms, every collision led to loss. There was no systematic difference in γeff for HOM-ONs and HOM-PPs arising from the same HOM peroxy radicals. This similarity is attributed to the multifunctional character of the HOMs: as functional groups in HOMs arising from the same precursor HOM peroxy radical are identical, vapor pressures should not strongly depend on the character of the final termination group. As a consequence, the suppressing effect of NOx on SOA formation cannot be simply explained by replacement of terminal functional groups by organic nitrate groups. According to their γeff all HOM-ONs with more than six O atoms will contribute to organic bound nitrate (OrgNO3) in the particulate phase. However, the fraction of OrgNO3 stored in condensable HOMs with molecular masses > 230 Da appeared to be substantially higher than the fraction of particulate OrgNO3 observed by aerosol mass spectrometry. This result suggests losses of OrgNO3 for organic nitrates in particles, probably due to hydrolysis of OrgNO3 that releases HNO3 into the gas phase but leaves behind the organic rest in the particulate phase. However, the loss of HNO3 alone could not explain the observed suppressing effect of NOx on particle mass formation from α -pinene and β -pinene. Instead we can attribute most of the reduction in SOA mass yields with increasing NOx to the significant suppression of gas phase HOM-ACCs, which have high molecular mass and are potentially important for SOA mass formation at low- NOx conditions. [ABSTRACT FROM AUTHOR]

Aromatic hydrocarbons are a class of volatile organic compounds associated with anthropogenic activity and make up a significant fraction of urban VOC emissions that contribute to the formation of secondary organic aerosol (SOA). Benzene is one of the most abundant species emitted from vehicles, biomass burning and industry. An iodide time of flight chemical ionisation mass spectrometer (ToF-CIMS) and nitrate ToF-CIMS were deployed at the Jülich plant chamber as part of a series of experiments examining benzene oxidation by OH under high and low NOx conditions, where a range of organic oxidation products were detected. The nitrate scheme detects many oxidation products with high masses ranging from intermediate volatile organic compounds (IVOC) to extremely low volatile organic compounds (ELVOC), including C12 dimers. In comparison, very few species with C≥6 and O≥8 were detected with the iodide scheme, which detected many more IVOC and semi volatile organic compounds (SVOC) but very few ELVOC and low volatile organic compounds (LVOC). 132 and 195 CHO and CHON oxidation products are detected by the iodide ToF-CIMS in the low and high NOx experiments respectively. Ring breaking products make up the dominant fraction of detected signal (89-91 %). 21 and 26 of the products listed in the master chemical mechanism (MCM) were detected and account for 6.4-7.3 % of total signal. The time series of highly oxidised (O≥6) and ring retaining oxidation products (C6 and double bond equivalent = 4) equilibrate quickly characterised by a square form profile, compared to MCM and ring breaking products which increase throughout oxidation exhibiting saw tooth profiles. Under low NOx conditions, all CHO formulae attributed to radical termination reactions of 1st generation benzene products and 1st generation autoxidation products are observed, and one exclusively 2nd generation autoxidation product is also measured (C6H8O8). Several N containing species that are either 1st generation benzene products or 1st generation autoxidation products are also observed under high NOx conditions. Hierarchical cluster analysis finds four cluster of which two describe photo-oxidation. Cluster 2 shows a negative dependency on the NO2/NOx ratio indicating it is sensitive to NO concentration thus likely to contain NO addition products and alkoxy derived termination products. This cluster has the highest average carbon oxidation state (OSc) and the lowest average carbon number and where nitrogen is present in cluster member, the oxygen number is even, as expected for alkoxy derived products. In contrast, cluster 1 shows no dependency on the NO2/NOx ratio and so is likely to contain more NO2 addition and peroxy derived termination products. This cluster contains less fragmented species, as the average carbon number is higher and OSc lower than cluster 2, and more species with an odd number of oxygen atoms. This suggests clustering of time series which have features pertaining to distinct chemical regimes e.g. NO2/NOx perturbations, coupled with a priori knowledge, can provide insight into identification of potential functionality. [ABSTRACT FROM AUTHOR]

The heterogeneous uptake of hydroxyl peroxy radicals (HO2) on aerosol has been proposed to be a significant sink of HOx, thus could influence the atmospheric oxidation capacity. Accurate calculation of the uptake coefficient γHO2 is the key to quantifying its atmospheric effects. Laboratory studies show that γHO2 varies by orders of magnitude due to change in aerosol properties, especially those of aerosol soluble copper (Cu) and aerosol liquid water content (ALWC). In this study, we develop a state-of-the-art model to simulate both gas and aerosol phase chemistry. A novel parameterized equation of HO2 considering change in RH and aerosol Cu is developed based on model optimization toward all available lab experiments. 1 / γ = 1 / α + (3 x v) / (4 X 106 X Rd Hcorr RT X (5.87 + 3.2 x ln(ALWC / [PM] + 0.067)) x [PM]-0.2 x [Cu2+]0.65) According to the new equation, highly variable HO2 uptake coefficients (median value ~0.1) were diagnosed for North China Plain and the impact of HO2 uptake on the ROx budget is assessed. [ABSTRACT FROM AUTHOR]

Theoretical, laboratory, and chamber studies have shown fast regeneration of the hydroxyl radical (OH) in the photochemistry of isoprene, largely due to unimolecular reactions which were previously thought not to be important under atmospheric conditions. Based on early field measurements, nearly complete regeneration was hypothesized for a wide range of tropospheric conditions, including areas such as the rainforest where slow regeneration of OH radicals is expected due to low concentrations of nitric oxide (NO). In this work the OH regeneration in isoprene oxidation is directly quantified for the first time through experiments covering a wide range of atmospherically relevant NO levels (between 0.15 and 2 ppbv – parts per billion by volume) in the atmospheric simulation chamber SAPHIR. These conditions cover remote areas partially influenced by anthropogenic NO emissions, giving a regeneration efficiency of OH close to 1, and areas like the Amazonian rainforest with very low NO, resulting in a surprisingly high regeneration efficiency of 0.5, i.e. a factor of 2 to 3 higher than explainable in the absence of unimolecular reactions. The measured radical concentrations were compared to model calculations, and the best agreement was observed when at least 50 % of the total loss of isoprene peroxy radicals conformers (weighted by their abundance) occurs via isomerization reactions for NO lower than 0.2 ppbv. For these levels of NO, up to 50 % of the OH radicals are regenerated from the products of the 1,6 α -hydroxy-hydrogen shift (1,6-H shift) of Z- δ - RO2 radicals through the photolysis of an unsaturated hydroperoxy aldehyde (HPALD) and/or through the fast aldehydic hydrogen shift (rate constant ∼10 s -1 at 300 K) in di-hydroperoxy carbonyl peroxy radicals (di-HPCARP- RO2), depending on their relative yield. The agreement between all measured and modelled trace gases (hydroxyl, hydroperoxy, and organic peroxy radicals, carbon monoxide, and the sum of methyl vinyl ketone, methacrolein, and hydroxyl hydroperoxides) is nearly independent of the adopted yield of HPALD and di-HPCARP- RO2 as both degrade relatively fast (<1 h), forming the OH radical and CO among other products. Taking into consideration this and earlier isoprene studies, considerable uncertainties remain on the distribution of oxygenated products, which affect radical levels and organic aerosol downwind of unpolluted isoprene-dominated regions. [ABSTRACT FROM AUTHOR]

As has been the case in North America and western Europe, the SO2 emissions have substantially reduced in the North China Plain (NCP) in recent years. Differential rates of reduction in SO2 and NOx concentrations result in the frequent occurrence of particulate matter pollution dominated by nitrate (pNO3-) over the NCP. In this study, we observed a polluted episode with the particulate nitrate mass fraction in nonrefractory PM 1 (NR-PM 1) being up to 44 % during wintertime in Beijing. Based on this typical pNO3- -dominated haze event, the linkage between aerosol water uptake and pNO3- enhancement, further impacting on visibility degradation, has been investigated based on field observations and theoretical calculations. During haze development, as ambient relative humidity (RH) increased from ∼10 % to 70 %, the aerosol particle liquid water increased from ∼1 µgm-3 at the beginning to ∼75 µgm-3 in the fully developed haze period. The aerosol liquid water further increased the aerosol surface area and volume, enhancing the condensational loss of N2O5 over particles. From the beginning to the fully developed haze, the condensational loss of N2O5 increased by a factor of 20 when only considering aerosol surface area and volume of dry particles, while increasing by a factor of 25 when considering extra surface area and volume due to water uptake. Furthermore, aerosol liquid water favored the thermodynamic equilibrium of HNO3 in the particle phase under the supersaturated HNO3 and NH3 in the atmosphere. All the above results demonstrated that pNO3- is enhanced by aerosol water uptake with elevated ambient RH during haze development, in turn facilitating the aerosol take-up of water due to the hygroscopicity of particulate nitrate salt. Such mutual promotion between aerosol particle liquid water and particulate nitrate enhancement can rapidly degrade air quality and halve visibility within 1 d. Reduction of nitrogen-containing gaseous precursors, e.g., by control of traffic emissions, is essential in mitigating severe haze events in the NCP. [ABSTRACT FROM AUTHOR]

Recent studies have recognised highly oxygenated organic molecules (HOMs) in the atmosphere as important in the formation of secondary organic aerosol (SOA). A large number of studies have focused on HOM formation from oxidation of biogenically emitted monoterpenes. However, HOM formation from anthropogenic vapours has so far received much less attention. Previous studies have identified the importance of aromatic volatile organic compounds (VOCs) for SOA formation. In this study, we investigated several aromatic compounds, benzene (C6H6), toluene (C7H8), and naphthalene (C10H8), for their potential to form HOMs upon reaction with hydroxyl radicals (OH). We performed flow tube experiments with all three VOCs and focused in detail on benzene HOM formation in the Jülich Plant Atmosphere Chamber (JPAC). In JPAC, we also investigated the response of HOMs to NOx and seed aerosol. Using a nitrate-based chemical ionisation mass spectrometer (CI-APi-TOF), we observed the formation of HOMs in the flow reactor oxidation of benzene from the first OH attack. However, in the oxidation of toluene and naphthalene, which were injected at lower concentrations, multi-generation OH oxidation seemed to impact the HOM composition. We tested this in more detail for the benzene system in the JPAC, which allowed for studying longer residence times. The results showed that the apparent molar benzene HOM yield under our experimental conditions varied from 4.1 % to 14.0 %, with a strong dependence on the OH concentration, indicating that the majority of observed HOMs formed through multiple OH-oxidation steps. The composition of the identified HOMs in the mass spectrum also supported this hypothesis. By injecting only phenol into the chamber, we found that phenol oxidation cannot be solely responsible for the observed HOMs in benzene experiments. When NOx was added to the chamber, HOM composition changed and many oxygenated nitrogen-containing products were observed in CI-APi-TOF. Upon seed aerosol injection, the HOM loss rate was higher than predicted by irreversible condensation, suggesting that some undetected oxygenated intermediates also condensed onto seed aerosol, which is in line with the hypothesis that some of the HOMs were formed in multi-generation OH oxidation. Based on our results, we conclude that HOM yield and composition in aromatic systems strongly depend on OH and VOC concentration and more studies are needed to fully understand this effect on the formation of HOMs and, consequently, SOA. We also suggest that the dependence of HOM yield on chamber conditions may explain part of the variability in SOA yields reported in the literature and strongly advise monitoring HOMs in future SOA studies. [ABSTRACT FROM AUTHOR]

The formation of organic nitrates (ON) in the gas phase and their impact on mass formation of Secondary Organic Aerosol (SOA) was investigated in a laboratory study for α-pinene and β-pinene photo-oxidation. Focus was the elucidation of those mechanisms that cause the often observed suppression of SOA mass formation by NOx, and therein the role of highly oxygenated multifunctional molecules (HOM). We observed that with increasing NOx (a) the portion of HOM organic nitrates (HOM-ON) increased, (b) the fraction of accretion products (HOM-ACC) decreased and (c) HOM-ACC contained on average smaller carbon numbers. Specifically, we investigated HOM organic nitrates (HOM-ON), arising from the termination reactions of HOM peroxy radicals with NOx, and HOM permutation products (HOM-PP), such as ketones, alcohols or hydroperoxides, formed by other termination reactions. Effective uptake coefficients γeff of HOM on particles were determined. HOM with more than 6 O-atoms efficiently condensed on particles (γeff > 0.5 in average) and for HOM containing more than 8 O-atoms, every collision led to loss. There was no systematic difference in γeff for HOM-ON and HOM-PP arising from the same HOM peroxy radicals. This similarity is attributed to the multifunctional character of the HOM: as functional groups in HOM arising from the same precursor HOM peroxy radical are identical, vapor pressures should not strongly depend on the character the final termination group. As a consequence, the suppressing effect of NOx on SOA formation cannot be simply explained by replacement of terminal functional groups by organic nitrate groups. The fraction of organic bound nitrate (OrgNO3) stored in gas-phase HOM-ON appeared to be substantially higher than the fraction of particulate OrgNO3 observed by aerosol mass spectrometry. This result suggests losses of OrgNO3 for organic nitrates in particles, probably due to hydrolysis of OrgNO3 that releases HNO3 into the gas phase but leaves behind the organic rest in the particulate phase. However, the loss of HNO3 alone, could not explain the observed suppressing effect of NOx on particle mass formation from α-pinene and β-pinene. We therefore attributed most of the reduction in SOA mass yields with increasing NOx to the significant suppression of gas-phase HOM-ACC which have high molecular mass and are potentially important for SOA mass formation at low NOx conditions. [ABSTRACT FROM AUTHOR]

In September 2017, we conducted a proton-transfer-reaction mass-spectrometry (PTR-MS) intercomparison campaign at the CESAR observatory, a rural site in the central Netherlands near the village of Cabauw. Nine research groups deployed a total of 11 instruments covering a wide range of instrument types and performance. We applied a new calibration method based on fast injection of a gas standard through a sample loop. This approach allows calibrations on timescales of seconds, and within a few minutes an automated sequence can be run allowing one to retrieve diagnostic parameters that indicate the performance status. We developed a method to retrieve the mass-dependent transmission from the fast calibrations, which is an essential characteristic of PTR-MS instruments, limiting the potential to calculate concentrations based on counting statistics and simple reaction kinetics in the reactor/drift tube. Our measurements show that PTR-MS instruments follow the simple reaction kinetics if operated in the standard range for pressures and temperature of the reaction chamber (i.e. 1–4 mbar, 30–120 ∘ , respectively), as well as a reduced field strength E/N in the range of 100–160 Td. If artefacts can be ruled out, it becomes possible to quantify the signals of uncalibrated organics with accuracies better than ±30 %. The simple reaction kinetics approach produces less accurate results at E/Npage6194 levels below 100 Td, because significant fractions of primary ions form water hydronium clusters. Deprotonation through reactive collisions of protonated organics with water molecules needs to be considered when the collision energy is a substantial fraction of the exoergicity of the proton transfer reaction and/or if protonated organics undergo many collisions with water molecules. [ABSTRACT FROM AUTHOR]

Theoretical, laboratory and chamber studies have shown fast regeneration of hydroxyl radical (OH) in the photochemistry of isoprene largely due to previously disregarded unimolecular reactions. Based on early field measurements, nearly complete regeneration was hypothesized for a wide range of tropospheric conditions, including areas such as the rainforest where slow regeneration of OH radicals is expected due to low concentrations of nitric oxide (NO). In this work the OH regeneration in the isoprene oxidation is directly quantified for the first time through experiments covering a wide range of atmospheric conditions (i.e. NO between 0.15 and 2 ppbv and temperature between 25 and 41 °C) in the atmospheric simulation chamber SAPHIR. These conditions cover remote areas partially influenced by anthropogenic NO emissions, giving a regeneration efficiency of OH close to one, and areas like the Amazonian rainforest with very low NO, resulting in a surprisingly high regeneration efficiency of 0.5, i.e. a factor of 2 to 3 higher than explainable in the absence of unimolecular reactions. The measured radical concentrations were compared to model calculations and the best agreement was observed when at least 50% of the total loss of isoprene peroxy radicals conformers (weighted by their abundance) occurs via isomerization reactions for NO lower than 0.2 parts per billion (ppbv). For these levels of NO, up to 50% of the OH radicals are regenerated from the products of the 1,6 α-hydroxy-hydrogen shift (1,6-H shift) of Z-δ-RO2 radicals through photolysis of an unsaturated hydroperoxy aldehyde (HPALD) and/or through the fast aldehyde hydrogen shift (rate constant ∼ 10 s-1 at 300 K) in di-hydroperoxy carbonyl peroxy radicals (di-HPCARP-RO2), depending on their relative yield. The agreement between all measured and modelled trace gases (hydroxyl, hydroperoxy and organic peroxy radicals, carbon monoxide and the sum of methyl vinyl ketone, methacrolein and hydroxyl hydroperoxides) is nearly independent on the adopted yield of HPALD and di-HPCARP-RO2 as both degrade relatively fast (< 1 h), forming OH radical and CO among other products. Taking into consideration this and earlier isoprene studies, considerable uncertainties remain on the oxygenated products distribution, which affect radical levels and organic aerosol downwind of unpolluted isoprene dominated regions. [ABSTRACT FROM AUTHOR]

The photooxidation of the most abundant monoterpene, α -pinene, by the hydroxyl radical (OH) was investigated at atmospheric concentrations in the atmospheric simulation chamber SAPHIR. Concentrations of nitric oxide (NO) were below 120 pptv. Yields of organic oxidation products are determined from measured time series giving values of 0.11±0.05 , 0.19±0.06 , and 0.05±0.03 for formaldehyde, acetone, and pinonaldehyde, respectively. The pinonaldehyde yield is at the low side of yields measured in previous laboratory studies, ranging from 0.06 to 0.87. These studies were mostly performed at reactant concentrations much higher than observed in the atmosphere. Time series of measured radical and trace-gas concentrations are compared to results from model calculations applying the Master Chemical Mechanism (MCM) 3.3.1. The model predicts pinonaldehyde mixing ratios that are at least a factor of 4 higher than measured values. At the same time, modeled hydroxyl and hydroperoxy (HO2) radical concentrations are approximately 25 % lower than measured values. suggested a shift of the initial organic peroxy radical (RO2) distribution towards RO2 species that do not yield pinonaldehyde but produce other organic products. Implementing these modifications reduces the model–measurement gap of pinonaldehyde by 20 % and also improves the agreement in modeled and measured radical concentrations by 10 %. However, the chemical oxidation mechanism needs further adjustment to explain observed radical and pinonaldehyde concentrations. This could be achieved by adjusting the initial RO2 distribution, but could also be done by implementing alternative reaction channels of RO2 species that currently lead to the formation of pinonaldehyde in the model. [ABSTRACT FROM AUTHOR]

As has been the case in North America and Western Europe, the SO2 emissions substantially reduced in North China Plain (NCP) in recent years. A dichotomy of reductions in SO2 and NOx concentrations result in the frequent occurrences of nitrate (pNO3−)-dominated particulate matter pollution over NCP. In this study, we observed a polluted episode with the nitrate mass fraction in non-refractory PM1 (NR-PM1) up to 44 % during wintertime in Beijing. Based on this typical pNO3−-dominated haze event, the linkage between aerosol water uptake and pNO3− formation, further impacting on visibility degradation, have been investigated based on field observations and theoretical calculations. During haze development, as ambient relative humidity (RH) increased from ~ 10 % up to 70 %, the aerosol particle liquid water increased from ~ 1 μg/m³ at the beginning to ~ 75 μg/m³ at the fully-developed haze period. Without considering the water uptake, the particle surface area and the volume concentrations increased by a factor of 4.1 and 4.8, respectively, during the development of haze event. Taking water uptake into account, the wet particle surface area and volume concentrations enhanced by a factor of 4.7 and 5.8, respectively. As a consequence, the hygroscopic growth of particles facilitated the condensational loss of dinitrogen pentoxide (N2O5) and nitric acid (HNO3) to particles contributing pNO3−. From the beginning to the fully-developed haze, the condensational loss of N2O5 increased by a factor of 20 when only considering aerosol surface area and volume of dry particles, while increasing by a factor of 25 considering extra surface area and volume due to water uptake. Similarly, the condensational loss of HNO3 increased by a factor of 2.7~2.9 and 3.1~3.5 for dry and wet aerosol surface area and volume from the beginning to the fully-developed haze period. Above results demonstrated that the pNO3− formation is further enhanced by aerosol water uptake with elevated ambient RH during haze development, in turn, facilitating the aerosol taking up water due to the hygroscopicity of nitrate salt. Such mutual promotion effect between aerosol particle liquid water and nitrate formation can rapidly degrade air quality and halve visibility within one day. Reduction of nitrogen-containing gaseous precursors, e.g., by control of traffic emissions, is essential in mitigating severe haze events in NCP. [ABSTRACT FROM AUTHOR]

Recent studies have recognized highly oxygenated organic molecules (HOM) in the atmosphere as important in the formation of secondary organic aerosol (SOA). A large number of studies have focused on HOM formation from oxidation of biogenically emitted monoterpenes. However, HOM formation from anthropogenic vapours has so far received much less attention. Previous studies have identified the importance of aromatic volatile organic compounds (VOC) for SOA formation. In this study, we investigated several aromatic compounds, benzene (C6H6), toluene (C7H8), and naphthalene (C10H8), for their potential to form HOM upon reaction with hydroxyl radicals (OH). We performed flow tube experiments with all three VOC, and focused in detail on benzene HOM formation in the Jülich Plant Atmosphere Chamber (JPAC). In JPAC, we also investigated the response of HOM to NOx and seed aerosol. Using a nitrate-based chemical ionization mass spectrometer (CI-APi-TOF), we observed the formation of HOM in the flow reactor oxidation of benzene from the first OH attack. However, in the oxidation of toluene and naphthalene, which were injected at lower concentrations, multi-generation OH oxidation seemed to impact the HOM composition. We tested this in more detail for the benzene system in the JPAC, which allowed for studying longer residence times. The results showed that the apparent molar benzene HOM yield under our experimental conditions varied from 4.1 to 14.0 %, with a strong dependence on the OH concentration, indicating that the majority of observed HOM formed through multiple OH-oxidation steps. The composition of the identified HOM in the mass spectrum also supported this hypothesis. By injecting only phenol into the chamber, we found that phenol oxidation cannot be solely responsible for the observed HOM in benzene experiments. When NOx was added to the chamber, HOM composition changed and many oxygenated nitrogen-containing products were observed in CI-APi-TOF. Upon seed aerosol injection, the HOM loss rate was higher than predicted by irreversible condensation, suggesting that some undetected oxygenated intermediates also condensed onto seed aerosol, which is in line with the hypothesis of multi-generation HOM. Based on our results that HOM yield and composition in aromatic systems strongly depend on OH and VOC concentration, we conclude that atmospheric models should account for such dependency and the chemical regime when implementing the quantitative results of laboratory studies. We also suggest that the dependence of HOM yield on chamber conditions may explain part of the variability in SOA yields reported in the literature. [ABSTRACT FROM AUTHOR]

Hydroxyl (OH) and peroxy radicals (HO2 and RO2) were measured in the Pearl River Delta, which is one of the most polluted areas in China, in autumn 2014. The radical observations were complemented by measurements of OH reactivity (inverse OH lifetime) and a comprehensive set of trace gases including carbon monoxide (CO), nitrogen oxides (NOx=NO , NO2) and volatile organic compounds (VOCs). OH reactivity was in the range from 15 to 80 s-1 , of which about 50 % was unexplained by the measured OH reactants. In the 3 weeks of the campaign, maximum median radical concentrations were 4.5×106 cm-3 for OH at noon and 3×108 and 2.0×108 cm-3 for HO2 and RO2 , respectively, in the early afternoon. The completeness of the daytime radical measurements made it possible to carry out experimental budget analyses for all radicals (OH, HO2 , and RO2) and their sum (ROx). The maximum loss rates for OH, HO2 , and RO2 reached values between 10 and 15 ppbvh-1 during the daytime. The largest fraction of this can be attributed to radical interconversion reactions while the real loss rate of ROx remained below 3 ppbvh-1. Within experimental uncertainties, the destruction rates of HO2 and the sum of OH, HO2 , and RO2 are balanced by their respective production rates. In case of RO2 , the budget could be closed by attributing the missing OH reactivity to unmeasured VOCs. Thus, the presumption of the existence of unmeasured VOCs is supported by RO2 measurements. Although the closure of the RO2 budget is greatly improved by the additional unmeasured VOCs, a significant imbalance in the afternoon remains, indicating a missing RO2 sink. In case of OH, the destruction in the morning is compensated by the quantified OH sources from photolysis (HONO and O3), ozonolysis of alkenes, and OH recycling (HO2+NO). In the afternoon, however, the OH budget indicates a missing OH source of 4 to 6 ppbvh-1. The diurnal variation of the missing OH source shows a similar pattern to that of the missing RO2 sink so that both largely compensate each other in the ROx budget. These observations suggest the existence of a chemical mechanism that converts RO2 to OH without the involvement of NO, increasing the RO2 loss rate during the daytime from 5.3 to 7.4 ppbvh-1 on average. The photochemical net ozone production rate calculated from the reaction of HO2 and RO2 with NO yields a daily integrated amount of 102 ppbv ozone, with daily integrated ROx primary sources being 22 ppbv in this campaign. The produced ozone can be attributed to the oxidation of measured (18 %) and unmeasured (60 %) hydrocarbons, formaldehyde (14 %), and CO (8 %). An even larger integrated net ozone production of 140 ppbv would be calculated from the oxidation rate of VOCs with OH if HO2 and all RO2 radicals react with NO. However, the unknown RO2 loss (evident in the RO2 budget) causes 30 ppbv less ozone production than would be expected from the VOC oxidation rate. [ABSTRACT FROM AUTHOR]