Search

The World Meteorological Organization (WMO) Global Atmosphere Watch (GAW) coordinates high-quality atmospheric greenhouse gas observations globally and provides these observations through the WMO World Data Centre for Greenhouse Gases (WDCGG) supported by Japan Meteorological Agency. The WDCGG and the National Oceanic and Atmospheric Administration (NOAA) analyse these measurements using different methodologies and site selection to calculate global annual mean surface CO 2 and its growth rate as a headline climate indicator. This study introduces a third hybrid method named GFIT, which serves as an independent validation and open-source alternative to the methods described by NOAA and WDCGG. We apply GFIT to incorporate observations from most WMO GAW stations and 3D modelled CO 2 fields from CarbonTracker Europe (CTE). We find that different observational networks (i.e. NOAA, GAW, and CTE networks) and analysis methods result in differences in the calculated global surface CO 2 mole fractions equivalent to the current atmospheric growth rate over a 3-month period. However, the CO 2 growth rate derived from these networks and the CTE model output shows good agreement. Over the long-term period (40 years), both networks with and without continental sites exhibit the same trend in the growth rate (0.030 ± 0.002 ppm yr -1 each year). However, a clear difference emerges in the short-term (1-month) change in the growth rate. The network that includes continental sites improves the early detection of changes in biogenic emissions. [ABSTRACT FROM AUTHOR]

The World Meteorological Organization (WMO) Global Atmosphere Watch (GAW) coordinates high-quality atmospheric greenhouse gas observations globally and provides these observations through the WMO World Data Centre for Greenhouse Gases (WDCGG) supported by Japan Meteorological Agency. The WDCGG and the National Oceanic and Atmospheric Administration (NOAA) analyse these measurements using different methodologies and site selection to calculate global annual mean surface CO2 and its growth rate as a headline climate indicator. This study proposes a third hybrid method named semi-NOAA, which is used as an independent validation of the methods as described by NOAA and WDCGG. We apply the semi-NOAA to incorporate observations from most WMO GAW stations and 3D modelled CO2 fields from CarbonTracker Europe (CTE). We found that different observational networks (i.e., the NOAA, GAW, and CTE networks) and analysis methods result in differences in the calculated global surface CO2 mole fractions equivalent to the current atmospheric growth rate over a three-month period. However, the CO2 growth rate derived from these networks and CTE model output shows good agreement. Over the long-term period (40 years), both networks with and without continental sites exhibit the same trend in the growth rate (0.030 ± 0.002 ppm per year). However, a clear difference emerges in the short28 term (one month) change of the growth rate. The network that includes continental sites improves the early detection of changes in biogenic emissions. [ABSTRACT FROM AUTHOR]

We present the CarbonTracker Europe High-Resolution (CTE-HR) system that estimates carbon dioxide (CO2) exchange over Europe at high resolution (0.1 × 0.2 ∘) and in near real time (about 2 months' latency). It includes a dynamic anthropogenic emission model, which uses easily available statistics on economic activity, energy use, and weather to generate anthropogenic emissions with dynamic time profiles at high spatial and temporal resolution (0.1×0.2 ∘ , hourly). Hourly net ecosystem productivity (NEP) calculated by the Simple Biosphere model Version 4 (SiB4) is driven by meteorology from the European Centre for Medium-Range Weather Forecasts (ECMWF) Reanalysis 5th Generation (ERA5) dataset. This NEP is downscaled to 0.1×0.2 ∘ using the high-resolution Coordination of Information on the Environment (CORINE) land-cover map and combined with the Global Fire Assimilation System (GFAS) fire emissions to create terrestrial carbon fluxes. Ocean CO2 fluxes are included in our product, based on Jena CarboScope ocean CO2 fluxes, which are downscaled using wind speed and temperature. Jointly, these flux estimates enable modeling of atmospheric CO2 mole fractions over Europe. We assess the skill of the CTE-HR CO2 fluxes (a) to reproduce observed anomalies in biospheric fluxes and atmospheric CO2 mole fractions during the 2018 European drought, (b) to capture the reduction of anthropogenic emissions due to COVID-19 lockdowns, (c) to match mole fraction observations at Integrated Carbon Observation System (ICOS) sites across Europe after atmospheric transport with the Transport Model, version 5 (TM5) and the Stochastic Time-Inverted Lagrangian Transport (STILT), driven by ECMWF-IFS, and (d) to capture the magnitude and variability of measured CO2 fluxes in the city center of Amsterdam (the Netherlands). We show that CTE-HR fluxes reproduce large-scale flux anomalies reported in previous studies for both biospheric fluxes (drought of 2018) and anthropogenic emissions (COVID-19 pandemic in 2020). After applying transport of emitted CO2 , the CTE-HR fluxes have lower median root mean square errors (RMSEs) relative to mole fraction observations than fluxes from a non-informed flux estimate, in which biosphere fluxes are scaled to match the global growth rate of CO2 (poor person's inversion). RMSEs are close to those of the reanalysis with the CTE data assimilation system. This is encouraging given that CTE-HR fluxes did not profit from the weekly assimilation of CO2 observations as in CTE. We furthermore compare CO2 concentration observations at the Dutch Lutjewad coastal tower with high-resolution STILT transport to show that the high-resolution fluxes manifest variability due to different emission sectors in summer and winter. Interestingly, in periods where synoptic-scale transport variability dominates CO2 concentration variations, the CTE-HR fluxes perform similarly to low-resolution fluxes (5– 10× coarsened). The remaining 10 % of the simulated CO2 mole fraction differs by >2 ppm between the low-resolution and high-resolution flux representation and is clearly associated with coherent structures ("plumes") originating from emission hotspots such as power plants. We therefore note that the added resolution of our product will matter most for very specific locations and times when used for atmospheric CO2 modeling. Finally, in a densely populated region like the Amsterdam city center, our modeled fluxes underestimate the magnitude of measured eddy covariance fluxes but capture their substantial diurnal variations in summertime and wintertime well. We conclude that our product is a promising tool for modeling the European carbon budget at a high resolution in near real time. The fluxes are freely available from the ICOS Carbon Portal (CC-BY-4.0) to be used for near-real-time monitoring and modeling, for example, as an a priori flux product in a CO2 data assimilation system. The data are available at 10.18160/20Z1-AYJ2. [ABSTRACT FROM AUTHOR]

We present the CarbonTracker Europe High-Resolution system that estimates carbon dioxide (CO2) exchange over Europe at high-resolution (0.1 x 0.2°) and in near real-time (about 2 months latency). It includes a dynamic fossil fuel emission model, which uses easily available statistics on economic activity, energy-use, and weather to generate fossil fuel emissions with dynamic time profiles at high spatial and temporal resolution (0.1 x 0.2°, hourly). Hourly net biosphere exchange (NEE) calculated by the Simple Biosphere model Version 4 (SiB4) is driven by meteorology from the European Centre for Medium-Range Weather Forecasts (ECMWF) Reanalysis 5th Generation (ERA5) dataset. This NEE is downscaled to 0.1 x 0.2° using the high-resolution Coordination of Information on the Environment (CORINE) land-cover map, and combined with the Global Fire Assimilation System (GFAS) fire emissions to create terrestrial carbon fluxes. An ocean flux extrapolation and downscaling based on wind speed and temperature for Jena CarboScope ocean CO2 fluxes is included in our product. Jointly, these flux estimates enable modeling of atmospheric CO2 mole fractions over Europe. We assess the ability of the CTE-HR CO2 fluxes (a) to reproduce observed anomalies in biospheric fluxes and atmospheric CO2 mole fractions during the 2018 drought, (b) to capture the reduction of fossil fuel emissions due to COVID-19 lockdowns, (c) to match mole fraction observations at Integrated Carbon Observation System (ICOS) sites across Europe after atmospheric transport with the Transport Model, version 5 (TM5) and the Stochastic Time-Inverted Lagrangian Transport (STILT), driven by ERA5, and (d) to capture the magnitude and variability of measured CO2 fluxes in the city centre of Amsterdam (The Netherlands). We show that CTE-HR fluxes reproduce large-scale flux anomalies reported in previous studies for both biospheric fluxes (drought of 2018) and fossil fuel emissions (COVID-19 pandemic in 2020). After transport with TM5, the CTE-HR fluxes have lower root mean square errors (RMSEs) relative to mole fraction observations than fluxes from a non-informed flux estimate, in which biosphere fluxes are scaled to match the global growth rate of CO2 (poor-person inversion). RSMEs are close to those of the reanalysis with the data assimilation system CarbonTracker Europe (CTE). This is encouraging given that CTE-HR fluxes did not profit from the weekly assimilation of CO2 observations as in CTE. We furthermore compare CO2 observations at the Dutch Lutjewad coastal tower with high-resolution STILT transport to show that the high-resolution fluxes manifest variability due to different sectors in summer and winter. Interestingly, in periods where synoptic scale transport variability dominates CO2 variations, the CTE-HR fluxes perform similar to low-resolution fluxes (5-10x coarsened). The remaining 10% of simulated CO2 mole fraction differ by > 2ppm between the low-resolution and high-resolution flux representation, and are clearly associated with coherent structures ("plumes") originating from emission hotspots, such as power plants. We therefore note that the added resolution of our product will matter most for very specific locations and times when used for atmospheric CO2 modeling. Finally, in a densely-populated region like the Amsterdam city centre, our fluxes underestimate the magnitude of measured eddy-covariance fluxes, but capture their substantial diurnal variations in summer- and wintertime well. We conclude that our product is a promising tool to model the European carbon budget at a high-resolution in near realtime. The fluxes are freely available from the ICOS Carbon Portal (CC-BY-4.0) to be used for near real-time monitoring and modeling, for example as a-priori flux product in a CO2 data-assimilation system. The data is available at https://doi.org/10. 18160/20Z1-AYJ2. [ABSTRACT FROM AUTHOR]

Glaciers in High Mountain Asia (HMA) provide an important water resource for communities downstream, and they are markedly impacted by global warming, yet there is a lack of understanding of the observed glacier mass balances and their spatial variability. In particular, the glaciers in the western Kunlun Shan and Karakoram (WKSK) ranges show neutral to positive mass balances despite global warming. Using models of the regional climate and glacier mass balance, we reproduce the observed patterns of glacier mass balance in High Mountain Asia of the last decades within uncertainties. We show that low temperature sensitivities of glaciers and an increase in snowfall, for a large part caused by increases in evapotranspiration from irrigated agriculture, result in positive mass balances in the WKSK. The pattern of mass balances in High Mountain Asia can thus be understood from the combination of changes in climatic forcing and glacier properties, with an important role for irrigated agriculture. [ABSTRACT FROM AUTHOR]