Search

Septins comprise a family of proteins involved in a variety of cellular processes and related to several human pathologies. They are constituted by three structural domains: the N- and C-terminal domains, highly variable in length and composition, and the central domain, involved in the guanine nucleotide (GTP) binding. Thirteen different human septins are known to form heterogeneous complexes or homofilaments, which are stabilized by specific interactions between the different interfaces present in the domains. In this work, we have investigated by in-solution small-angle x-ray scattering the structural and thermodynamic properties of a human septin 3 construct, SEPT3-GC, which contains both of both interfaces (G and NC) responsible for septin-septin interactions. In order to shed light on the role of these interactions, small-angle x-ray scattering measurements were performed in a wide range of temperatures, from 2 up to 56°C, both with and without a nonhydrolysable form of GTP (GTPγS). The acquired data show a temperature-dependent coexistence of monomers, dimers, and higher-order aggregates that were analyzed using a global fitting approach, taking into account the crystallographic structure of the recently reported SEPT3 dimer, PDB:3SOP. As a result, the enthalpy, entropy, and heat capacity variations that control the dimer-monomer dissociation equilibrium in solution were derived and GTPγS was detected to increase the enthalpic stability of the dimeric species. Moreover, a temperature increase was observed to induce dissociation of SEPT3-GC dimers into monomers just preceding their reassembling into amyloid aggregates, as revealed by the Thioflavin-T fluorescence assays., (Copyright © 2015 Biophysical Society. Published by Elsevier Inc. All rights reserved.)

In this study we pursue a closer analysis of the photodamage promoted on giant unilamellar vesicles membranes made of dioleoyl-sn-glycero-3-phosphocholine (DOPC) or 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC), by irradiating methylene blue present in the giant unilamellar vesicles solution. By means of optical microscopy and electro-deformation experiments, the physical damage on the vesicle membrane was followed and the phospholipids oxidation was evaluated in terms of changes in the membrane surface area and permeability. As expected, oxidation modifies structural characteristics of the phospholipids that lead to remarkable membrane alterations. By comparing DOPC- with POPC-made membranes, we observed that the rate of pore formation and vesicle degradation as a function of methylene blue concentration follows a diffusion law in the case of DOPC and a linear variation in the case of POPC. We attributed this scenario to the nucleation process of oxidized species following a diffusion-limited growth regime for DOPC and in the case of POPC a homogeneous nucleation process. On the basis of these premises, we constructed models based on reaction-diffusion equations that fit well with the experimental data. This information shows that the outcome of the photosensitization reactions is critically dependent on the type of lipid present in the membrane., (Copyright © 2014 Biophysical Society. Published by Elsevier Inc. All rights reserved.)

Giant unilamellar vesicles or GUVs are systems of choice as biomimetic models of cellular membranes. Although a variety of procedures exist for making single walled vesicles of tens of microns in size, the range of lipid compositions that can be used to grow GUVs by the conventional methods is quite limited, and many of the available methods involve energy input that can damage the lipids or other molecules present in the growing solution for embedment in the membrane or in the vesicle interior. Here, we show that a wide variety of lipids or lipid mixtures can grow into GUVs by swelling lipid precursor films on top of a dried polyvinyl alcohol gel surface in a swelling buffer that can contain diverse biorelevant molecules. Moreover, we show that the encapsulation potential of this method can be enhanced by combining polyvinyl alcohol-mediated growth with inverse-phase methods, which allow (bio)molecule complexation with the lipids., (Copyright © 2013 Biophysical Society. Published by Elsevier Inc. All rights reserved.)

The combined effects of concentration and pH on the conformational states of bovine serum albumin (BSA) are investigated by small-angle x-ray scattering. Serum albumins, at physiological conditions, are found at concentrations of approximately 35-45 mg/mL (42 mg/mL in the case of humans). In this work, BSA at three different concentrations (10, 25, and 50 mg/mL) and pH values (2.0-9.0) have been studied. Data were analyzed by means of the Global Fitting procedure, with the protein form factor calculated from human serum albumin (HSA) crystallographic structure and the interference function described, considering repulsive and attractive interaction potentials within a random phase approximation. Small-angle x-ray scattering data show that BSA maintains its native state from pH 4.0 up to 9.0 at all investigated concentrations. A pH-dependence of the absolute net protein charge is shown and the charge number per BSA is quantified to 10(2), 8(1), 13(2), 20(2), and 26(2) for pH values 4.0, 5.4, 7.0, 8.0, and 9.0, respectively. The attractive potential diminishes as BSA concentration increases. The coexistence of monomers and dimers is observed at 50 mg/mL and pH 5.4, near the BSA isoelectric point. Samples at pH 2.0 show a different behavior, because BSA overall shape changes as a function of concentration. At 10 mg/mL, BSA is partially unfolded and a strong repulsive protein-protein interaction occurs due to the high amount of exposed charge. At 25 and 50 mg/mL, BSA undergoes some re-folding, which likely results in a molten-globule state. This work concludes by confirming that the protein concentration plays an important role on the pH-unfolded BSA state, due to a delicate compromise between interaction forces and crowding effects., (Copyright 2010 Biophysical Society. Published by Elsevier Inc. All rights reserved.)

We have synthesized the amphiphile photosensitizer PE-porph consisting of a porphyrin bound to a lipid headgroup. We studied by optical microscopy the response to light irradiation of giant unilamellar vesicles of mixtures of unsaturated phosphatidylcholine lipids and PE-porph. In this configuration, singlet oxygen is produced at the bilayer surface by the anchored porphyrin. Under irradiation, the PE-porph decorated giant unilamellar vesicles exhibit a rapid increase in surface area with concomitant morphological changes. We quantify the surface area increase of the bilayers as a function of time and photosensitizer molar fraction. We attribute this expansion to hydroperoxide formation by the reaction of the singlet oxygen with the unsaturated bonds. Considering data from numeric simulations of relative area increase per phospholipid oxidized (15%), we measure the efficiency of the oxidative reactions. We conclude that for every 270 singlet oxygen molecules produced by the layer of anchored porphyrins, one eventually reacts to generate a hydroperoxide species. Remarkably, the integrity of the membrane is preserved in the full experimental range explored here, up to a hydroperoxide content of 60%, inducing an 8% relative area expansion.

The aggregate morphology of meso-tetrakis(4-sulfonatophenyl) porphyrin (TPPS(4)) in aqueous solution is investigated by using small angle x-ray scattering (SAXS) technique. Measurements were performed at pH 4.0 and 9.0 to monitor the pH influence on the structural parameters of the aggregates. Radii of gyration were obtained from distance distribution functions p(r) analysis. The experimental data of TPPS(4) at pH 4.0 showed well-defined oscillations characteristic of large aggregates in contrast to the SAXS curve of 5 mM TPPS(4) at pH 9.0, where both a significant decrease in the intensity and the disappearance of the oscillation peaks suggest the dissociation of the aggregate. A 340-A long "hollow" cylinder with shell thickness of 20 A, compatible to the porphyrin molecule dimension, represents well the scattering curve of the aggregates at pH 4.0. According to the fitting parameters, 26 porphyrin molecules self-associate into a ringlike configuration in the plane of the cylinder cross-section. The total number of porphyrin molecules in the whole aggregate was also estimated as approximately 3000. The model compatible to SAXS data of a hollow cylinder with J-aggregation in the cross-section and H-aggregation (columnar stacking) between the cylinder layers is consistent with optical absorption spectroscopic data both in the literature and obtained in this work.

The ferricytochrome-c (cyt-c) shows a complex unfolding pathway characterized by a series of stable partially folded states. When titrated with HCl at low ionic strength, two transitions are detected. At pH 2, cyt-c assumes the U1 unfolded state, whereas the successive addition of Cl(-) ion from either HCl or NaCl induces the recompaction to a molten globule conformation (A1 and A2 states, respectively). A second unfolded state (U2) is also observed at pH 12. Recent data evidence different features for the local structure of the heme in the different states. To derive relationships between local and overall conformations, we analyzed the structural characteristics of the different states by synchrotron small angle X-ray scattering. The results show that in the acidic-unfolded U1 form the protein assumes a worm-like conformation, whereas in the alkaline-unfolded U2 state, the cyt-c is globular. Moreover, the molten globule states induced by adding HCl or NaCl to U1 appear structurally different: in the A1 state cyt-c is dimeric and less compact, whereas in the A2 form the protein reverts to a globular-like conformation. According to the local heme structure, a molecular model for the different forms is derived.

The variable-period x-ray standing wave (XSW) technique is emerging as a powerful tool for studying membrane structure. However, two significant problems arise when the method is used to characterize membranes of thickness dL < 100 A. First, the surface roughness, sigma(r), of the supporting reflecting mirror convolutes with the intrinsic half-width of the marker atom distribution in the membrane, sigma(in), and contributes to an apparent half-width, sigma, which is measured in the XSW experiment. Here we show how the latter terms are related quantitatively [sigma(in) = (sigma2 - sigma(r)2)(1/2)], such that rough mirrors give rise to larger marker atom distribution widths, sigma, and how the required quantity sigma(in) can be determined in the XSW measurement. Second, when the mean position of the marker atom layer, (z), is close to one or both boundaries of the membrane, its distribution function is truncated at the boundary. In such cases, we show why marker atom distribution should be expressed in terms of its first and second moments. We also demonstrate by numerical simulations of realistic samples how the physical parameters, sigma(r), sigma, (z), and dL, affect x-ray reflectivity and fluorescence yield profiles as an aid in their interpretation.

A series of model membranes as Langmuir-Blodgett (LB) films composed of long-chain zinc alkanoates (saturated fatty acid salts) was used to evaluate the spatial resolution of the variable-period x-ray standing-wave (XSW) technique. The chain length dependence of the zinc mean position (z) above the supporting substrate demonstrates that it is possible to detect differences in (z) of 1-2 A. Thus 1-2 A is the spatial resolution of the method in the current application. The data show that the chain tilt angle is chain length dependent, varying from 40 degrees to 0 degrees for alkanoates 18 and 24 carbon atoms long, respectively. The spread about the mean position of the zinc in the film, sigma(in), was found to be independent of chain length at 10.0 A for all members of the series. Sigma(in) was shown to be insensitive to the presence of a "spacer" omega-tricosenoic acid (omegaTA) bilayer placed between the zinc alkanoate LB film and the coated gold mirror. However, an overlayer of omegaTA sharpened the zinc ion distribution and lowered the chain tilt angle. This study provides important information regarding sample composition and constitution that facilitates membrane structure determination by XSWs.