Search

We analyze the total factor productivity (TFP) of the pulp and paper industry in three Canadian provinces (British Columbia, Ontario, and Quebec) and in three United States (US) states that are contiguously located south of the border (Washington, Illinois, and Maine) over the period of 1971 to 2005. We find that the industry in the three Canadian provinces had much higher TFP growth rates in the era following the Free-Trade Agreement (FTA) signed in 1988. In terms of productivity level, this relative TFP surge allowed the industry in Ontario and British Columbia to move ahead of Illinois and Washington, respectively; however, Quebec trailed further Maine, which is the overall leader in the sample. Our results in this particular case reveal that the Canadian pulp and paper industry did not contribute to the overall Canada-US productivity gap. [ABSTRACT FROM AUTHOR]

Copyright of Canadian Journal of Forest Research is the property of Canadian Science Publishing and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

During the process of papermaking by pulp and paper plants, a thick and viscous deposits, termed slime, is quickly formed around the paper machines, which can affect the papermaking process. In this study, we explored the composition of the bacterial biota in slime that developed on shower pipes from 2 machines at a Canadian paper mill. Firstly, the composition was assessed for 12 months by DNA profiling with polymerase chain reaction coupled with denaturing gradient gel electrophoresis. Except for short periods (2-3 months), clustered analyses showed that the bacterial composition of the slime varied substantially over the year, with less than 50% similarity between the denaturing gradient gel electrophoresis profiles. Secondly, the screening of 16S rRNA gene libraries derived from 2 slime samples showed that the most abundant bacteria were related to 6 lineages, including Chloroflexi, candidate division OP10, Clostridiales, Bacillales, Burkholderiales, and the genus Deinococcus. Finally, the proportion of 8 bacterial lineages, such as Deinococcus sp., Meiothermus sp., and Chloroflexi, was determined by the Catalyzed Reporter Deposition - Fluorescence In Situ Hybridization in 2 slime samples. The results showed a high proportion of Chloroflexi, Tepidimonas spp., and Schlegelella spp. in the slime samples. Lors du processus de fabrication industrielle du papier, un dépôt épais et visqueux se forme rapidement autour des machines à papier, ce qui peut affecter le processus de fabrication. Dans cette étude, nous avons exploré la composition bactérien ne du dépôt qui s'est développée sur des tuyaux des douches de 2 machines d'une usine à papier au Canada. La composition a d'abord été évaluée pendant 12 mois par la détermination du profil d'ADN par une réaction en chaîne par polymérase couplée à une électrophorèse sur gel en gradient dénaturant. À part de courtes périodes (2-3 mois), les analyses ont montré que la composition bactérienne du dépôt variait substantiellement au cours de l'année, avec moins de 50 % de similarité entre les profils en l'électrophorèse sur gel en gradient dénaturant. Deuxièmement, le criblage de banques géniques d'ARN ribosomique 16S dérivées de 2 échantillons de dépôt a ensuite montré que les bactéries les plus abondantes étaient apparentées à 6 lignées, notamment les Chloroflexi, la division candidate OP10, les Clostridiales, les Bacillales, les Burkholderiales, et le genre Deinococcus. Finalement, la proportion de 8 lignées bactériens comme Deinococcus sp., Meiothermus sp. et Chloroflexi a été déterminée par « Catalyzed Reporter Deposition - Fluorescence In Situ Hybridization » dans 2 échantillons de dépôt. Les résultats ont montré une forte proportion de Chloroflexi, Tepidimonas spp. et Schlegelella spp. dans les échantillons. [ABSTRACT FROM AUTHOR]

Red heartwood, a dark nonhomogenous discolouration in paper birch trees ( Marsh.), limits the applications and uses of sawn boards to nonvisible low-value products, thus resulting in substantial value loss. The occurrence and distribution of red heartwood were investigated in 12 paper birch trees grown in the province of Quebec, Canada. The youngest tree was 62 years old at breast height and the oldest 86 years old for an average of 75 years old. In this study, 225 occurrences of external traits, relating to branch scars and forks, previously proposed as initiation points for red heartwood were identified and measured. The distribution of red heartwood was digitally mapped and the effect of these external traits on the red heartwood surface and shape inside each tree was examined. Results show that red heartwood initiates from an external trait and that multiple external traits can contribute to the development of a red heartwood column following the longitudinal axis of the stem. Red heartwood appeared to initiate mainly from external traits at the base of the tree. A modelling exercise indicated that the width of the red heartwood column inside a standing tree can be estimated from branch scar width and height from the ground. Tree vigour could not be linked to the proportion of red heartwood inside standing trees. A three-dimensional analysis of log shape could potentially be used to detect red heartwood presence in a log before processing to optimize the log sawing pattern. [ABSTRACT FROM AUTHOR]

Copyright of Environmental Reviews is the property of Canadian Science Publishing and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Analyzes the productivity and efficiency in the Canadian pulp and paper industry using input distance function and index number methods. Managerial and policy implications of productivity growth; Components of productivity growth; Contribution of output scale effects, capital disequilibrium to the industry.

The headbox water is the main source of bacterial contamination of paper machines. Identification of these bacterial contaminants could be an asset in developing specific control methods. An amplified ribosomal DNA restriction analysis (ARDRA) was carried out to characterize the bacterial communities associated with the headbox water of a paper machine in a Canadian mill in February and July 2006. Eight bacterial genera were identified as the main colonizers present in the headbox water. The genus Meiothermus appeared to be the dominant bacterial group in the Canadian paper machine. Some variation was observed between the February and July clone libraries. Bacterial genera such as Chelatococcus and Hydrogenophilus were only detected in February or in July, respectively. Furthermore, the proportion of Tepidimonas clones in the libraries was higher in July than in February. The metabolic profile of the February and July communities, determined using Biolog EcoPlates, also suggested that temporal variation occurred within the bacterial populations that colonized the headbox of the paper machine.

Many position stands and review papers have refuted the myths associated with resistance training (RT) in children and adolescents. With proper training methods, RT for children and adolescents can be relatively safe and improve overall health. The objective of this position paper and review is to highlight research and provide recommendations in aspects of RT that have not been extensively reported in the pediatric literature. In addition to the well-documented increases in muscular strength and endurance, RT has been used to improve function in pediatric patients with cystic fibrosis and cerebral palsy, as well as pediatric burn victims. Increases in children's muscular strength have been attributed primarily to neurological adaptations due to the disproportionately higher increase in muscle strength than in muscle size. Although most studies using anthropometric measures have not shown significant muscle hypertrophy in children, more sensitive measures such as magnetic resonance imaging and ultrasound have suggested hypertrophy may occur. There is no minimum age for RT for children. However, the training and instruction must be appropriate for children and adolescents, involving a proper warm-up, cool-down, and appropriate choice of exercises. It is recommended that low- to moderate-intensity resistance exercise should be done 2-3 times/week on non-consecutive days, with 1-2 sets initially, progressing to 4 sets of 8-15 repetitions for 8-12 exercises. These exercises can include more advanced movements such as Olympic-style lifting, plyometrics, and balance training, which can enhance strength, power, co-ordination, and balance. However, specific guidelines for these more advanced techniques need to be established for youth. In conclusion, an RT program that is within a child's or adolescent's capacity and involves gradual progression under qualified instruction and supervision with appropriately sized equipment can involve more advanced or intense RT exercises, which can lead to functional (i.e., muscular strength, endurance, power, balance, and co-ordination) and health benefits.

We examined the microbial community structure and quantified the levels of the filamentous bulking organism Thiothrix eikelboomii in samples of activated sludge mixed liquor suspended solids (MLSS) from Canadian pulp and paper mills. Libraries of chaperonin 60 (cpn60) gene sequences were prepared from MLSS total microbial community DNA and each was compared with cpnDB, a reference database of cpn60 sequences (http://cpndb.cbr.nrc.ca) for assignment of taxonomic identities. Sequences similar to but distinct from the type strain of T. eikelboomii AP3 (ATCC 49788T) (approximately 89% identity over 555 bp) were recovered at high frequency from a mill sample that was experiencing bulking problems at the time of sample collection, which corresponded to microscopic observations using fluorescent in situ hybridization with commercially available 16S rDNA-based probes. We enumerated this strain in five mill-derived MLSS samples using real-time quantitative PCR (qPCR) and found that two samples had high levels of the bulking strain (>1012 genomes/g MLSS) and two contained lower but detectable levels of this organism. None of the mill samples contained cpn60 sequences that were identical to the type strain of T. eikelboomii. This technique shows promise for monitoring pulp and paper mill wastewater treatment systems by detecting and enumerating this strain of T. eikelboomii, which may be specific to pulp and paper mill wastewater treatment systems.

Copyright of Canadian Journal of Zoology is the property of Canadian Science Publishing and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Resin acids, a group of diterpenoid carboxylic acids present mainly in softwood species, are present in many pulp mill effluents and toxic to fish in recipient waters. They are considered to be readily biodegradable. However, their removal across biological treatment systems has been shown to vary. Recent studies indicate that natural resin acids and transformation products may accumulate in sediments and pose acute and chronic toxicity to fish. Several resin acid biotransformation compounds have also been shown to bioaccumulate and to be more resistant to biodegradation than the original material. Until recently, the microbiology of resin-acid degradation has received only scant attention. Although wood-inhabiting fungi have been shown to decrease the level of resin present in wood, there is no conclusive evidence that fungi can completely degrade these compounds. In contrast, a number of bacterial isolates have recently been described which are able to utilize dehydroabietic or isopimaric acids as their sole carbon source. There appears to be an unusually high degree of substrate specificity with respect of the utilization of abietane congeners and the presence of substituents. Pimaranes do not appear to be attacked to the same extent as the abietanes. This paper reviews the occurrence, chemistry, toxicity, and biodegradation of resin acids in relation to the biological treatment of pulp and paper mill effluents.

The relationship between forest stand composition in southern interior British Columbia and fluorescent pseudomonad bacteria populations was investigated using seedling bioassays. The objectives of this study were to (i) compare the relative population sizes of fluorescent pseudomonads baited from soils in pure paper birch (Betula papyrifera Marsh.), pure Douglas-fir (Pseudotsuga menziesii (Mirb.) Franco), and mixed stands of the two species and (ii) determine if fluorescent pseudomonads from these soils have inhibitory effects against the root pathogen Armillaria ostoyae (Romagn.) Herink in vitro. Soil from birch stands supported four times more pseudomonads on seedling baits than soil from Douglas-fir stands, with the mixed stands intermediate. Soil from young stands yielded twice as many rhizosphere pseudomonads as soil from mature stands. Pseudomonad population size was positively correlated with percent cover and density of birch, and negatively correlated with basal area of Douglas-fir, percent cover of Douglas-fir, and carbon/nitrogen ratio of the soil. Greater than 50% of the fluorescent isolates reduced radial growth of A. ostoyae by more than 20% and greater than 90% reduced biomass of the fungus in dual culture tests. Cell-free bacterial culture filtrates added to the growth medium also reduced growth of A. ostoyae. This study provides evidence that paper birch provides a more favorable environment for fluorescent pseudomonads than Douglas-fir and suggests a mechanism by which paper birch can positively influence the susceptibility of managed forest stands to Armillaria root disease. [ABSTRACT FROM AUTHOR]

The article announces that Tiffani A. Fraser and Matt P. Hutchison won the 2017 Best Paper Award from the Canadian Science Publishing and the Geological Association of Canada.

The article features scientist John Ripmeester, who has made enormous impact on various research areas involving nuclear magnetic resonance (NMR) spectroscopy, porous materials, and clathrate hydrates. Topics include Ripmeester's experience of working for the paper industry in Canada, how his interest in chemistry has been developed, and his retirement from research in 2008 to focus on his role as head of the Functional Materials Program of the Steacie Institute for Molecular Sciences (SIMS).

Reports on the measured rates of decomposition at three sites representing the major mixedwood forest types of British Columbia: (i) boreal forests of white spruce (Picea glauca (Moench) Voss) and trembling aspen (Populus tremuloides Michx.), (ii) coastal forests of Douglas-fir (Pseudotsuga menziesii (Mirb.) Franco) and red alder (Alnus rubra Bong.), and (iii) a wet interior forest of Douglas-fir, paper birch (Betula papyrifera Marsh.), and lodgepole pine (Pinus contorta Doug. ex Loud.). Mass loss of litter of each species (both pure and in combination with the other species) that was measured in forests of each species to determine (i) if broadleaf litter decomposed faster than needle litter, (ii) if litter decomposed faster in broadleaf or mixedwood forests than in coniferous forests, and (iii) if mixing with broadleaf hastened decomposition of needle litter; Broadleaf litters that decomposed faster than needles during the first year but, thereafter, decomposed more slowly; Litter that tended to decompose faster in the broadleaf forests than in the coniferous forests; No evidence to indicate that the addition of broadleaf litter hastened decomposition of needle litter; Results that indicate that the mixing of needle litter with broadleaf litter is unlikely to hasten decomposition in mixedwood forests of British Columbia.

The package PbIso is a free and open R toolbox for commonly used calculations and plots of Pb–Pb isotope data and for generating Pb evolution models. In this paper, we review Pb isotope systematics and the calculations that are commonly used, such as model age, model source μ (238U/204Pb), time-integrated κ (232Th/238U), and initial Pb isotope ratios. These equations are implemented into R functions in the package PbIso. In addition, functions are provided for generating Pb evolution models, paleoisochrons, and isochrons. This allows users to apply calculations to their data in a straightforward way while providing transparency and flexibility of the calculations used. We have implemented some basic features of the PbIso package into an online shiny R application (see https://shereearmistead.github.io/software/pbiso), which makes it easy for users without any R experience to use these calculations with their own data and to generate plots. We have provided a case study from the Superior Province in Canada, showing how different Pb evolution models can be generated in PbIso and compared to Pb isotope data. [ABSTRACT FROM AUTHOR]