Search

Abstract Background Nowadays, both lateral mass screw (LMS) and pedicle screw were effective instrumentation for posterior stabilization of cervical spine. This study aims to evaluate the feasibility of a new free-hand technique of C7 pedicle screw insertion without fluoroscopic guidance for cervical spondylotic myelopathy (CSM) patients with C3 to C6 instrumented by lateral mass screws. Methods A total of 53 CSM patients underwent lateral mass screws instrumentation at C3 to C6 levels and pedicle screw instrumentation at C7 level were included. The preoperative 3-dimenional computed tomography (CT) reconstruction images of cervical spine were used to determine 2 different C7 pedicle screw trajectories. Trajectory A passed through the axis of the C7 pedicle while trajectory B selected the midpoint of the base of C7 superior facet as the entry point. All these 53 patients had the C7 pedicle screw inserted through trajectory B by free-hand without fluoroscopic guidance and the postoperative CT images were obtained to evaluate the accuracy of C7 pedicle screw insertion. Results Trajectory B had smaller transverse angle, smaller screw length, and smaller screw width but both similar sagittal angle and similar pedicle height when compared with trajectory A. A total of 106 pedicle screws were inserted at C7 through trajectory B and only 8 screws were displaced with the accuracy of screw placement as high as 92.5%. Conclusion In CSM patients with C3 to C6 instrumented by LMS, using trajectory B for C7 pedicle screw insertion is easy to both identify the entry point and facilitate the rod insertion.

Abstract Background Although thoracic pedicle (TP) screw has gained increasingly popularity in the surgical treatment of adolescent idiopathic scoliosis (AIS) patients, questions remain about the accurate selection of entry point for TP screw placement in these patient. The main objective of the present study was to evaluate the accuracy of TP screw placement in AIS patients using the entry point identified by new landmarks. Methods Thirty-four thoracic AIS patients treated with posterior TP screw instrumentation were included. All these TP screws were inserted through the entry point identified by new landmarks with free-hand technique. Postoperative CT scans were obtained to evaluate the screw position. The perforations of the pedicle were classified as grade 0 (no perforation), grade 1 (≤ 2 mm), grade 2 (2.1–4 mm), grade 3 (4.1–6 mm) and grade 4 (6.1–8.0 mm). Screws in grade 0, displaced either medially or anteriorly in grade 1 and displaced laterally in grades 1 to 2 were considered acceptable. Results Of the 495 TP screws inserted, 34 (6.9%) screws were displaced with 7 screws (1.4%) displaced medially, 20 screws (4.1%) displaced laterally and 7 screws (1.4%) displaced anteriorly (P

Abstract Background Large amounts of thoracic curve correction had been considered as a risk factor for postoperative shoulder imbalance (PSI) in adolescent idiopathic scoliosis (AIS) patients. This study aims to evaluate postoperative shoulder balance in Lenke type 1 AIS patients with large thoracic curve (Cobb angle ≥ 70 degrees) and compared it with those with moderate thoracic curve (Cobb angle 0.05). Conclusions Although Lenke type 1 AIS patients with large thoracic curve had more amounts of MT curve correction when compared with those with moderate thoracic curve, it did not lead to higher incidence of PSI if the correction rate is proper.

Abstract Background There was a paucity of valid information on how to rectify the convex coronal imbalance effectively in dystrophic scoliosis secondary to Type I neurofibromatosis (DS-NF1), while postoperative inadvertent aggravation of CCI occurred regularly resulting in poor patient satisfaction. We aimed to identify the risk factors for persistent postoperative CCI in DS-NF1, and to optimize the coronal rebalancing strategies based on the lessons learned from this rare case series. Methods NF1-related scoliosis database was reviewed and those with significant CCI (> 3 cm) were identified, sorted and the outcomes of surgical coronal rebalance were analyzed to identify the factors being responsible for failure of CCI correction. Results CCI with dystrophic thoracolumbar/lumbar apex was prone to remain uncorrected (7 failure cases in 11) when compared to those with thoracic apex (0 failure cases in 4) (63.6% vs. 0.0%, p = 0.077). Further comparison between those with and without post-op CCI showed a higher correction of main curve Cobb angle (65.9 ± 9.1% vs. 51.5 ± 37.3%, p = 0.040), more tilted instrumentation (10.3 ± 3.6° vs. 3.2 ± 3.1°, p = 0.001) and reverse tilt and translation of upper instrumented vertebra (UIV) to convex side (8.0 ± 2.3° vs. -3.4 ± 5.9°, p

Abstract Background Rib head dislocation (RHD) in dystrophic scoliosis of type 1 neurofibromatosis (DS-NF1) is a unique disorder caused by skeletal dystrophy and scoliotic instability. No particular surgical manipulation is mentioned in the literature to instruct the spine surgeons to effectively obtain more migration of the dislocated rib head without resection. The present study aimed to investigate the effectiveness of screw/hook insertion at vertebrae with RHDs on the retraction of penetrated rib head from spinal canal. Methods 37 neurologically intact patients with DS-NF1 and concomitant 53 RHDs undergoing scoliosis surgery without rib head excision were retrospectively reviewed. We used pre and postoperative whole-spine radiographs to determine the Cobb angle and the vertebral translation (VT), and the CT scans to evaluate the intraspinal rib length (IRL) and rib-vertebral angle (RVA). The dislocated ribs were assigned into two groups according to the presence of screw/hook insertion at vertebrae with RHD: screw/hook group and non-screw/hook group. Results 37 dislocated ribs with screws/hooks insertion at corresponding vertebrae were assigned into the screw/hook group and the remaining 16 dislocated ribs consisted of the non-screw/hook group. In the screw/hook group, the correction rates of Cobb angle and VT were significantly higher than the non-screw/hook group after surgery (58.7 ± 16.0% vs. 30.9 ± 12.4%, p = 0.003; 61.8 ± 18.8% vs. 35.1 ± 16.6%, p = 0.001; respectively). Similarly, more correction rates of IRL and RVA were found in the screw/hook group than the non-screw/hook group (63.1 ± 31.3% vs. 30.1 ± 20.7%, p = 0.008; 17.6 ± 9.7% vs. 7.2 ± 3.6%, p = 0.006; respectively). Multiple linear regression analysis revealed that the correction rates of Cobb angle, VT and RVA contributed significantly to correction of IRL (β = 0.389, 0.939 and 1.869, respectively; p = 0.019, 0.001 and 0.002, respectively). Conclusion Screw/hook insertion at dystrophic vertebrae with RHDs contributed significantly to the degree of retraction of penetrated rib head from spinal canal. This effectiveness is mediated by more corrections of VT and RVA.

Abstract Background Contiguous double-level lumbar spondylolytic spondylolisthesis is an extremely rare condition. There is a paucity of data of lumbosacral deformity and sagittal spino-pelvic malalignment among these patients. Moreover, the effect of transforaminal lumbar interbody fusion (TLIF) on sagittal realignment still remains largely unknown. The aim of the study is to investigate the reconstruction of sagittal alignment and the improvement of clinical outcomes after posterior instrumented double-level or single-level TLIF. Methods From January 2010 to September 2018, the records of patients with contiguous L4/5 and L5/S1 double-level spondylolytic spondylolisthesis were retrospectively reviewed. Patients who had undergone double-level or single-level TLIF and a minimum of 2 years’ follow-up were included. The slippage parameters and spino-pelvic parameters were measured preoperatively, postoperatively, and at the latest follow-up. Results A total of 58 patients (21 males and 37 females, mean age of 57.1 ± 6.9 years) were enrolled. Thirty-eight patients were treated with double-level TLIF and the remaining 20 with single-level TLIF (L4/5 in 14; L5/S1 in 6). After surgery, the spondylolisthesis was significantly reduced at both L4/5 and L5/S1 level (all P

Abstract Background Previously, many studies have evaluated quality of life (QoL) in patients with ankylosing spondylitis (AS), however, none of them specifically investigated the correlation between pain-related disability measured by Oswestry Disability Index (ODI) and QoL in AS patients. In addition, the correlation between global kyphosis (GK) in lateral plain radiographs and QoL in AS patients remains unclear up to now. Therefore, this study aimed to evaluate QoL and correlation with clinical and radiographic variables in AS patients, especially to figure out the relationship about the pain-specific disability measured by ODI, GK and QoL. Methods From January 2008 to November 2015, two hundred and forty-five consecutive patients with an average age of 36.2 ± 10.9 years (range, 17–66 years) satisfying the Modified New York Criteria for AS from a single institution were enrolled. Bath Ankylosing Spondylitis Disease Activity Index (BASDAI), Bath Ankylosing Spondylitis Functional Index (BASFI), Bath Ankylosing Spondylitis Metrology Index (BASMI) and Bath Ankylosing Spondylitis Global score (BAS-G) were applied to assess the disease activity, functional status, spinal mobility and overall feeling of AS patients, respectively. ODI was recorded to evaluate low back pain-related disability. QoL was evaluated by the Short Form-36 (SF-36). According to global kyphosis (GK) measured on standing lateral full-spine radiographs, the patients were divided into two groups: mild kyphotic group (GK