Search

Abstract Background The screw-in effect is a tendency of a nickel-titanium (NiTi) rotary endodontic file to be pulled into the canal, which can result in a sudden increase in stress leading to instrument fracture, and over-instrumentation beyond the apex. To reduce screw-in force, repeated up-and-down movements are recommended to distribute flexural stress during instrumentation, especially in curved and constricted canals. However, there is no consensus on the optimal number of repetitions. Therefore, this study aimed to examine how repeated up-and-down movements at the working length affect torque/force generation, surface defects, and canal shaping ability of JIZAI and TruNatomy instruments. Methods An original automated root canal instrumentation device was used to prepare canals and to record torque/force changes. The mesial roots of human mandibular molars with approximately 30˚ of canal curvature were selected through geometric matching using micro-computed tomography. The samples were divided into three groups according to the number of up-and-down movements at the working length (1, 3, and 6 times; n = 24 each) and subdivided according to the instruments: JIZAI (#13/0.04 taper, #25/0.04 taper, and #35/0.04 taper) or TruNatomy (#17/0.02 taper, #26/0.04 taper, and #36/0.03 tape) (n = 12 each). The design, surface defects, phase transformation temperatures, nickel-titanium ratios, torque, force, shaping ability, and surface deformation were evaluated. Data were analyzed with the Kruskal-Wallis and Dunn’s tests (α = 0.05). Results The instruments had different designs and phase transformation temperatures. The 3 and 6 up-and-down movements resulted in a smaller upward force compared to 1 movement (p

Abstract Background The aim of this study was to evaluate the phase composition, phase transformation temperatures, bending property, and cyclic fatigue resistance of different heat-treated nickel-titanium (NiTi) rotary instruments with the same tip diameter and taper at room (RT; 25 ± 1 °C) and body (BT; 37 ± 1 °C) temperatures. Methods Five heat-treated NiTi rotary instruments, HyFlex EDM (EDM), HyFlex CM (CM), Vortex Blue (VB), RE file CT (RE) and JIZAI, and a non-heat-treated NiTi rotary instrument (Mtwo) with a size 40, 0.04 taper were investigated. Temperature-dependent phase transformation was examined with differential scanning calorimetry (DSC). The bending loads of the instruments at RT and BT were evaluated using a cantilever-bending test. Cyclic fatigue resistance at RT and BT was measured using a dynamic test, during which the instruments were rotated in combination with a 2-mm back-and-forth motion in an artificial curved canal, and the number of cycles to failure (NCF) was determined. The results were analyzed using two-way repeated measures analysis of variance, a simple main effect test, and the Bonferroni test (α = 0.05). Results DSC results indicated that EDM and Mtwo were primarily composed of martensite/R-phase and austenite, respectively, while the other heat-treated instruments were composed of a mix of martensite/R-phase and austenite at the tested temperatures. Regardless of the temperature setting, the bending loads of heat-treated instruments were significantly lower than those of Mtwo (p 0.05). Conclusions Heat-treated NiTi instruments exhibited lower bending loads and higher NCF values than Mtwo. However, this tendency was less pronounced at BT than at RT, especially in the NCF values of instruments with a mixture of martensite/R-phase and austenite phases at the tested temperatures.

Abstract Background Unfractionated heparin sodium and nafamostat mesylate have long been used as anticoagulants in continuous kidney replacement therapy (CKRT) where citrate is unavailable. This study aimed to determine whether heparin or nafamostat mesylate used during CKRT was associated with a longer filter life. Methods In this single-centre observational study, we included adult patients who required CKRT and used heparin or nafamostat mesylate for their first CKRT in the intensive care unit from September 1, 2013, to December 31, 2020. The primary outcome was filter life (from the start to the end of using the first filter). We used propensity score matching to adjust for the imbalance in patients’ characteristics and laboratory data at the start of CKRT and compared the outcomes between the two groups. We also performed restricted mean survival time analysis to compare the filter survival times. Results We included 286 patients, 157 patients on heparin and 129 patients on nafamostat mesylate. After propensity score matching, the mean filter life with heparin was 1.58 days (N = 91, Standard deviation [SD], 1.52) and with nafamostat mesylate was 1.06 days (N = 91, SD, 0.94, p = 0.006). Multivariable regression analysis adjusted for confounding factors supported that heparin was associated with a longer filter life compared with nafamostat mesylate (regression coefficient, days, 0.52 [95% CI, 0.15, 0.89]). The between group difference of the restricted mean filter survival time in the matched cohort was 0.29 (95% CI, 0.07–0.50, p = 0.008). Conclusion Compared to nafamostat mesylate, heparin was associated with one-third to one-half a day longer filter life. Trial registration Not applicable.

Abstract Background To evaluate the effect of pecking motions with faster upward speed on the dynamic cyclic fatigue resistance of nickel-titanium rotary instruments with different metallurgy. Methods Forty each of ProTaper Universal F3 (PTU) and ProTaper Gold F3 (PTG) instruments (size #30/.09) were equally divided into four groups. The test was performed using an 18-mm-long stainless steel artificial canal with a 5-mm radius of curvature, a 45° canal curvature and a 2-mm canal diameter. A downward speed of 100 mm/min was employed, while the upward speed was set at 100, 150, 200 or 300 mm/min. Time to failure (Tf), number of cycles to failure (Nf) and number of pecking motions to failure (Np) were recorded. Statistical analysis was performed using Kruskal Wallis and Mann–Whitney U tests for Tf, Nf, and Np (α = 0.05). Results The 100/300 mm/min group showed significantly higher Np values than the 100/100 mm/min group (p

Abstract Background Epithelioid cell granuloma with caseating necrosis is a typical pathological finding in tuberculosis. While specific inflammation, including that related to tuberculosis, can induce caseating granuloma formation, there have been very few reports on the induction of caseating granuloma by non-specific inflammation. Chronic periapical periodontitis is usually related to bacterial biofilm formation as well as fungal or viral infection in the periapical lesion. However, it is difficult to eliminate these extraradicular pathogenic microbes by normal endodontic therapy alone, and more invasive surgical removal is almost always required. Case presentation Here we describe the case of a 30-year-old Japanese woman who had suffered from dull pain related to periapical periodontitis for approximately 10 years. Although the causal tooth had been previously extracted at the Department of Oral Surgery of another hospital in 2015, inflammation of the surrounding tissue had not abated. She was referred to our hospital in May 2016 and underwent surgical debridement via an intra/extraoral approach under general anesthesia. A caseating granuloma accompanied by a small amount of fungi was histopathologically confirmed in the excised specimen. Her inflammation has not been exacerbated since the operation. Conclusions This is the first report in which non-specific inflammation is shown to induce caseating granuloma arising in the jaw. Our report also highlights the importance of sufficient root canal treatment during the first stage of the procedure.