Search

Background: The magnetic resonance imaging (MRI) radio frequency (RF) field induced heating on external fixation devices can be very high in the vicinity of device screws. Such induced RF heating is related to device constructs, device placements, as well as the device insertion depth into human subjects. In this study, computational modeling is performed to determine factors associated with such induced heating. Methods: Numerical modeling, based on the finite-difference time-domain (FDTD) method, is used to evaluate the temperature rises near external device screw tips inside the ASTM phantom for both 1.5-T and 3-T MRI systems. The modeling approach consists of 1) the development of RF coils for 1.5-T and 3-T, 2) the electromagnetic simulations of energy deposition near the screw tips of external fixation devices, and 3) the thermal simulations of temperature rises near the tips of these devices. Results: It is found that changing insertion depth and screw spacing could largely affect the heating of these devices. In 1.5-T MRI system, smaller insertion depth and larger pin spacing will lead to higher temperature rise. However, for 3-T MRI system, the relation is not very clear when insertion depth is larger than 5 cm or when pin spacing became larger than 20 cm. The effect of connection bar material on device heating is also studied and the heating mechanism of the device is analysed. Conclusions: Numerical simulation is used to study RF heating for external fixation devices in both 1.5-T and 3-T MRI coils. Typically, shallower insertion depth and larger pin spacing with conductive bar lead to higher RF heating. The heating mechanism is explained using induced current along the device and power decay inside ASTM phantom. [ABSTRACT FROM AUTHOR]

Background: Typically, electrodes for Deep Brain Stimulation (DBS) are used for chronic stimulation. However, there are conditions where this therapy has to be discontinued. In such cases using the DBS electrodes as a tool for thermo-lesioning (coagulation) could be used for an alternative treatment. The aim of this study was to determine if it is possible to generate coagula with a predictable geometry and to define their dimensions as a function of power and time in an in vitro model (egg white at room temperature). Furthermore, we tested if repetitive (cumulative) coagulation has an impact on the overall form and size of the clot. Findings: Coagulation-growth was achieved as a function of power and duration of coagulation; reproducible well-formed thermocoagulations could be achieved. When using two adjacent electrodes a power range between 1.25 Watt and 2.00 Watt resulted in homogenous ovoid coagula. After two minutes of coagulation the clots reached a maximum in size and further growth could not be achieved. It was also possible to increase the size of a preformed clot by repetitive coagulation either by increasing the power level or the duration of the coagulation process. Conclusions: We could show that it is possible to obtain predictable coagula in-vitro when using DBS electrodes for thermocoagulation even though they have not been developed for that specific purpose. However, until invivo safety and efficacy of DBS electrodes for ablation purposes is properly assessed, only approved electrodes should be used for brain ablation. [ABSTRACT FROM AUTHOR]

We reviewed articles using computational RF dosimetry to compare the Specific Anthropomorphic Mannequin (SAM) to anatomically correct models of the human head. Published conclusions based on such comparisons have varied widely. We looked for reasons that might cause apparently similar comparisons to produce dissimilar results. We also looked at the information needed to adequately compare the results of computational RF dosimetry studies. We concluded studies were not comparable because of differences in definitions, models, and methodology. Therefore we propose a protocol, developed by an IEEE standards group, as an initial step in alleviating this problem. The protocol calls for a benchmark validation study comparing the SAM phantom to two anatomically correct models of the human head. It also establishes common definitions and reporting requirements that will increase the comparability of all computational RF dosimetry studies of the human head. [ABSTRACT FROM AUTHOR]

Background: The purpose was to investigate mobile phone interference with implantable deep brain stimulators by means of 10 different 900 Mega Hertz (MHz) and 10 different 1800 MHz GSM (Global System for Mobile Communications) mobile phones. Methods: All tests were performed in vitro using a phantom especially developed for testing with deep brain stimulators. The phantom was filled with liquid phantom materials simulating brain and muscle tissue. All examinations were carried out inside an anechoic chamber on two implants of the same type of deep brain stimulator: ITREL-III from Medtronic Inc., USA. Results: Despite a maximum transmitted peak power of mobile phones of 1 Watt (W) at 1800 MHz and 2 W at 900 MHz respectively, no influence on the ITREL-III was found. Neither the shape of the pulse form changed nor did single pulses fail. Tests with increased transmitted power using CW signals and broadband dipoles have shown that inhibition of the ITREL-III occurs at frequency dependent power levels which are below the emissions of GSM mobile phones. The ITREL-III is essentially more sensitive at 1800 MHz than at 900 MHz. Particularly the frequency range around 1500 MHz shows a very low interference threshold. Conclusion: These investigations do not indicate a direct risk for ITREL-III patients using the tested GSM phones. Based on the interference levels found with CW signals, which are below the mobile phone emissions, we recommend similar precautions as for patients with cardiac pacemakers: 1. The phone should be used at the ear at the opposite side of the implant and 2. The patient should avoid carrying the phone close to the implant. [ABSTRACT FROM AUTHOR]

According to manufacturers of both magnetic resonance imaging (MRI) machines, and implantable neurological pulse generators (IPGs), MRI is contraindicated for patients with IPGs. A major argument for this restriction is the risk to induce heat in the leads due to the electromagnetic field, which could be dangerous for the surrounding brain parenchyma. The temperature change on the surface of the case of an ITREL-III (Medtronic Inc., Minneapolis, MN) and the lead tip during MRI was determined. An anatomical realistic and a cubic phantom, filled with phantom material mimicking human tissue, and a typical lead configuration were used to imitate a patient who carries an IPG for deep brain stimulation. The measurements were performed in a 1.5 T and a 3.0 T MRI. 2.1°C temperature increases at the lead tip uncovered the lead tip as the most critical part concerning heating problems in IPGs. Temperature increases in other locations were low compared to the one at the lead tip. The measured temperature increase of 2.1°C can not be considered as harmful to the patient. Comparison with the results of other studies revealed the avoidance of loops as a practical method to reduce heating during MRI procedures. [ABSTRACT FROM AUTHOR]

Background: MRI induced heating on PM leads is a very complex issue. The widely varying results described in literature suggest that there are many factors that influence the degree of heating and that not always are adequately addressed by existing testing methods.Methods: We present a wide database of experimental measurements of the heating of metallic wires and PM leads in a 1.5 T RF coil. The aim of these measurements is to systematically quantify the contribution of some potential factors involved in the MRI induced heating: the length and the geometric structure of the lead; the implant location within the body and the lead path; the shape of the phantom used to simulate the human trunk and its relative position inside the RF coil.Results: We found that the several factors are the primary influence on heating at the tip. Closer locations of the leads to the edge of the phantom and to the edge of the coil produce maximum heating. The lead length is the other crucial factor, whereas the implant area does not seem to have a major role in the induced temperature increase. Also the lead structure and the geometry of the phantom revealed to be elements that can significantly modify the amount of heating.Conclusion: Our findings highlight the factors that have significant effects on MRI induced heating of implanted wires and leads. These factors must be taken into account by those who plan to study or model MRI heating of implants. Also our data should help those who wish to develop guidelines for defining safe medical implants for MRI patients. In addition, our database of the entire set of measurements can help those who wish to validate their numerical models of implants that may be exposed to MRI systems. [ABSTRACT FROM AUTHOR]

Background: Typically, electrodes for Deep Brain Stimulation (DBS) are used for chronic stimulation. However, there are conditions where this therapy has to be discontinued. In such cases using the DBS electrodes as a tool for thermo-lesioning (coagulation) could be used for an alternative treatment. The aim of this study was to determine if it is possible to generate coagula with a predictable geometry and to define their dimensions as a function of power and time in an in vitro model (egg white at room temperature). Furthermore, we tested if repetitive (cumulative) coagulation has an impact on the overall form and size of the clot., Findings: Coagulation-growth was achieved as a function of power and duration of coagulation; reproducible well-formed thermocoagulations could be achieved. When using two adjacent electrodes a power range between 1.25 Watt and 2.00 Watt resulted in homogenous ovoid coagula. After two minutes of coagulation the clots reached a maximum in size and further growth could not be achieved. It was also possible to increase the size of a preformed clot by repetitive coagulation either by increasing the power level or the duration of the coagulation process., Conclusions: We could show that it is possible to obtain predictable coagula in-vitro when using DBS electrodes for thermocoagulation even though they have not been developed for that specific purpose. However, until in-vivo safety and efficacy of DBS electrodes for ablation purposes is properly assessed, only approved electrodes should be used for brain ablation.