Search

Context: The Monte Carlo method is probably the most widely used approach to solve the radiative transfer problem, especially in a general 3D geometry. The physical processes of emission, absorption, and scattering are easily incorporated in the Monte Carlo framework. Net stimulated emission, or absorption with a negative cross section, does not fit this method, however. Aims: We explore alterations to the standard photon packet life cycle in Monte Carlo radiative transfer that allow the treatment of net stimulated emission without loss of generality or efficiency. Methods: We present the explicit absorption technique that allows net stimulated emission to be handled efficiently. It uses the scattering rather than the extinction optical depth along a photon packet's path to randomly select the next interaction location, and offers a separate, deterministic treatment of absorption. We implemented the technique in a special-purpose Monte Carlo code for a two-stream 1D radiative transfer problem and in the fully featured 3D code SKIRT, and we studied its overall performance using quantitative statistical tests. Results: Our special-purpose code is capable of recovering the analytical solutions to the two-stream problem in all regimes, including the one of strong net stimulated emission. The implementation in SKIRT is straightforward, as the explicit absorption technique easily combines with the variance reduction and acceleration techniques already incorporated. In general, explicit absorption tends to improve the efficiency of the Monte Carlo routine in the regime of net absorption. Conclusions: Explicit absorption allows the treatment of net stimulated emission in Monte Carlo radiative transfer, it interfaces smoothly with... (abridged), Comment: 14 pages, accepted for publication in A&A

We apply the radiative transfer (RT) code SKIRT on a sample of ~14000 low-redshift (z, The full galaxy SEDs and the broadband fluxes at z

We describe the addition of Lyman-alpha resonant line transfer to our dust continuum radiation transfer code SKIRT, verifying our implementation with published results for spherical problems and using some self-designed three-dimensional setups. We specifically test spatial discretization through various grid types, including hierarchical octree grids and unstructured Voronoi tessellations. We then use a radiation transfer post-processing model for one of the spiral galaxies produced by the Auriga cosmological zoom simulations to investigate the effect of spatial discretization on the synthetic observations. We find that the calculated Lyman-alpha line profiles exhibit an extraordinarily strong dependence on the type and resolution of the spatial grid, rendering the results untrustworthy at best. We attribute this effect to the large gradients in the hydrogen density distribution over small distances, which remain significantly under-resolved in the input model. We therefore argue that further research is needed to determine the required spatial resolution of a hydrodynamical simulation snapshot to enable meaningful Lyman-alpha line transfer post-processing., Comment: Accepted for publication in The Astrophysical Journal

(Aims) In this work, we predict the far-infrared polarisation signal emitted by non-spherical dust grains in nearby galaxies. We determine the angular resolution and sensitivity required to study the magnetic field configuration in these galaxies. (Methods) We post-process a set of Milky Way like galaxies from the Auriga project, assuming a dust mix consisting of spheroidal dust grains that are partially aligned with the model magnetic field. We constrain our dust model using Planck 353 GHz observations of the Milky Way. This model is then extrapolated to shorter wavelengths that cover the peak of interstellar dust emission and to observations of arbitrarily oriented nearby Milky Way like galaxies. (Results) Assuming an intrinsic linear polarisation fraction that does not vary significantly with wavelength for wavelengths longer than 50 micron, we predict a linear polarisation fraction with a maximum of $10-15\%$ and a median value of $\approx{}7\%$ for face-on galaxies and $\approx{}3\%$ for edge-on galaxies. The polarisation fraction anti-correlates with the line of sight density and with the angular dispersion function which expresses the large scale order of the magnetic field perpendicular to the line of sight. The maximum linear polarisation fraction agrees well with the intrinsic properties of the dust model. The true magnetic field orientation can be traced along low density lines of sight when it is coherent along the line of sight. These results also hold for nearby galaxies, where a coherent magnetic field structure is recovered over a range of different broad bands. (Conclusions) Polarised emission from non-spherical dust grains accurately traces the large scale structure of the galactic magnetic field in Milky Way like galaxies, with expected maximum linear polarisation fractions of $10-15\%$. To resolve this maximum, a spatial resolution of at least 1 kpc is required., Comment: 22 pages, 19 figures, accepted for publication in Astronomy and Astrophysics

We present the new open source C++-based Python library CosTuuM that can be used to generate infrared absorption and emission coefficients for arbitrary mixtures of spheroidal dust grains that are (partially) aligned with a magnetic field. We outline the algorithms underlying the software, demonstrate the accuracy of our results using benchmarks from literature, and use our tool to investigate some commonly used approximative recipes. We find that the linear polarization fraction for a partially aligned dust grain mixture can be accurately represented by an appropriate linear combination of perfectly aligned grains and grains that are randomly oriented, but that the commonly used picket fence alignment breaks down for short wavelengths. We also find that for a fixed dust grain size, the absorption coefficients and linear polarization fraction for a realistic mixture of grains with various shapes cannot both be accurately represented by a single representative grain with a fixed shape, but that instead an average over an appropriate shape distribution should be used. Insufficient knowledge of an appropriate shape distribution is the main obstacle in obtaining accurate optical properties. CosTuuM is available as a standalone Python library and can be used to generate optical properties to be used in radiative transfer applications., Comment: 25 pages, 21 figures, accepted for publication in The Astronomical Journal, CosTuuM is available from https://github.com/SKIRT/CosTuuM

The open source SKIRT Monte Carlo radiative transfer code has been used for more than 15 years to model the interaction between radiation and dust in various astrophysical systems. In this work, we present version 9 of the code, which has been substantially redesigned to support long-term objectives. We invite interested readers to participate in the development, testing and application of new features such as including gas media types in addition to dust, performing line transfer in addition to continuum radiation transfer, and modeling polarization by non-spherical dust grains aligned by magnetic fields. We describe the major challenges involved in preparing the code for these and other extensions, as well as their resolution, including a completely new treatment of wavelengths to support kinematics. SKIRT 9 properly runs over 400 handcrafted functional tests and successfully performs all relevant benchmarks. The source code and all documentation is publicly available for use and ready for further collaborative development., Comment: 24 pages, 14 figures, accepted for publication in Astronomy and Computing

The interstellar dust content in galaxies can be traced in extinction at optical wavelengths, or in emission in the far-infrared. Several studies have found that radiative transfer models that successfully explain the optical extinction in edge-on spiral galaxies generally underestimate the observed FIR/submm fluxes by a factor of about three. In order to investigate this so-called dust energy balance problem, we use two Milky Way-like galaxies produced by high-resolution hydrodynamical simulations. We create mock optical edge-on views of these simulated galaxies (using the radiative transfer code SKIRT), and we then fit the parameters of a basic spiral galaxy model to these images (using the fitting code FitSKIRT). The basic model includes smooth axisymmetric distributions along a S\'ersic bulge and exponential disc for the stars, and a second exponential disc for the dust. We find that the dust mass recovered by the fitted models is about three times smaller than the known dust mass of the hydrodynamical input models. This factor is in agreement with previous energy balance studies of real edge-on spiral galaxies. On the other hand, fitting the same basic model to less complex input models (e.g. a smooth exponential disc with a spiral perturbation or with random clumps), does recover the dust mass of the input model almost perfectly. Thus it seems that the complex asymmetries and the inhomogeneous structure of real and hydrodynamically simulated galaxies are a lot more efficient at hiding dust than the rather contrived geometries in typical quasi-analytical models. This effect may help explain the discrepancy between the dust emission predicted by radiative transfer models and the observed emission in energy balance studies for edge-on spiral galaxies., Comment: 9 pages, 5 figures, accepted for publication in A&A

We discuss the architecture and design principles that underpin the latest version of SKIRT, a state-of-the-art open source code for simulating continuum radiation transfer in dusty astrophysical systems, such as spiral galaxies and accretion disks. SKIRT employs the Monte Carlo technique to emulate the relevant physical processes including scattering, absorption and emission by the dust. The code features a wealth of built-in geometries, radiation source spectra, dust characterizations, dust grids, and detectors, in addition to various mechanisms for importing snapshots generated by hydrodynamical simulations. The configuration for a particular simulation is defined at run-time through a user-friendly interface suitable for both occasional and power users. These capabilities are enabled by careful C++ code design. The programming interfaces between components are well defined and narrow. Adding a new feature is usually as simple as adding another class; the user interface automatically adjusts to allow configuring the new options. We argue that many scientific codes, like SKIRT, can benefit from careful object-oriented design and from a friendly user interface, even if it is not a graphical user interface., Comment: Accepted for publication in Astronomy and Computing; the SKIRT source code and manual are publicly available, respectively at https://github.com/skirt/skirt and http://www.skirt.ugent.be

A crucial ingredient for numerically solving the 3D radiative transfer problem is the choice of the grid that discretizes the transfer medium. Many modern radiative transfer codes, whether using Monte Carlo or ray tracing techniques, are equipped with hierarchical octree-based grids to accommodate a wide dynamic range in densities. We critically investigate two different aspects of octree grids in the framework of Monte Carlo dust radiative transfer. Inspired by their common use in computer graphics applications, we test hierarchical k-d tree grids as an alternative for octree grids. On the other hand, we investigate which node subdivision-stopping criteria are optimal for constructing of hierarchical grids. We implemented a k-d tree grid in the 3D radiative transfer code SKIRT and compared it with the previously implemented octree grid. We also considered three different node subdivision-stopping criteria (based on mass, optical depth, and density gradient thresholds). Based on a small suite of test models, we compared the efficiency and accuracy of the different grids, according to various quality metrics. For a given set of requirements, the k-d tree grids only require half the number of cells of the corresponding octree. Moreover, for the same number of grid cells, the k-d tree is characterized by higher discretization accuracy. Concerning the subdivision stopping criteria, we find that an optical depth criterion is not a useful alternative to the more standard mass threshold, since the resulting grids show a poor accuracy. Both criteria can be combined; however, in the optimal combination, for which we provide a simple approximate recipe, this can lead to a 20% reduction in the number of cells needed to reach a certain grid quality. An additional density gradient threshold criterion can be added that solves the problem of poorly resolving sharp edges and... (abridged)., Comment: 10 pages, 6 figures. Accepted for publication in A&A

Probing the structure of complex astrophysical objects requires effective three-dimensional (3D) numerical simulation of the relevant radiative transfer (RT) processes. As with any numerical simulation code, the choice of an appropriate discretization is crucial. Adaptive grids with cuboidal cells such as octrees have proven very popular, however several recently introduced hydrodynamical and RT codes are based on a Voronoi tessellation of the spatial domain. Such an unstructured grid poses new challenges in laying down the rays (straight paths) needed in RT codes. We show that it is straightforward to implement accurate and efficient RT on 3D Voronoi grids. We present a method for computing straight paths between two arbitrary points through a 3D Voronoi grid in the context of a RT code. We implement such a grid in our RT code SKIRT, using the open source library Voro++ to obtain the relevant properties of the Voronoi grid cells based solely on the generating points. We compare the results obtained through the Voronoi grid with those generated by an octree grid for two synthetic models, and we perform the well-known Pascucci RT benchmark using the Voronoi grid. The presented algorithm produces correct results for our test models. Shooting photon packages through the geometrically much more complex 3D Voronoi grid is only about three times slower than the equivalent process in an octree grid with the same number of cells, while in fact the total number of Voronoi grid cells may be lower for an equally good representation of the density field. We conclude that the benefits of using a Voronoi grid in RT simulation codes will often outweigh the somewhat slower performance., Comment: 9 pages, 7 figures, accepted by AA