Search

Beginning with cosmological initial conditions at z=100, we simulate the effects of magnetic fields on the formation of Population III stars and compare our results with the predictions of Paper I. We use Gadget-2 to follow the evolution of the system while the field is weak. We introduce a new method for treating kinematic fields by tracking the evolution of the deformation tensor. The growth rate in this stage of the simulation is lower than expected for diffuse astrophysical plasmas, which have a very low resistivity (high magnetic Prandtl number); we attribute this to the large numerical resistivity in simulations, corresponding to a magnetic Prandtl number of order unity. When the magnetic field begins to be dynamically significant in the core of the minihalo at z=27, we map it onto a uniform grid and follow the evolution in an adaptive mesh refinement, MHD simulation in Orion2. The nonlinear evolution of the field in the Orion2 simulation violates flux-freezing and is consistent with the theory proposed by Xu & Lazarian. The fields approach equipartition with kinetic energy at densities ~ 10^10 - 10^12 cm^-3. When the same calculation is carried out in Orion2 with no magnetic fields, several protostars form, ranging in mass from ~ 1 to 30 M_sol with magnetic fields, only a single ~ 30 M_sol protostar forms by the end of the simulation. Magnetic fields thus suppress the formation of low-mass Pop III stars, yielding a top-heavy Pop III IMF and contributing to the absence of observed Pop III stars., 31 pages, 30 figures, accepted to MNRAS

Despite the rich observational results on interstellar magnetic fields in star-forming regions, it is still unclear how dynamically significant the magnetic fields are at varying physical scales, because direct measurement of the field strength is observationally difficult. The Davis-Chandrasekhar-Fermi (DCF) method has been the most commonly used method to estimate the magnetic field strength from polarization data. It is based on the assumption that gas turbulent motion is the driving source of field distortion via linear Alfv\'en waves. In this work, using MHD simulations of star-forming clouds, we test the validity of the assumption underlying the DCF method by examining its accuracy in the real 3D space. Our results suggest that the DCF relation between turbulent kinetic energy and magnetic energy fluctuation should be treated as a statistical result instead of a local property. We then develop and investigate several modifications to the original DCF method using synthetic observations, and propose new recipes to improve the accuracy of DCF-derived magnetic field strength. We further note that the biggest uncertainty in the DCF analysis may come from the linewidth measurement instead of the polarization observation, especially since the line-of-sight gas velocity can be used to estimate the gas volume density, another critical parameter in the DCF method., Comment: 20 pages, 17 figures, accepted for publication in MNRAS

Optical and infrared polarization mapping and recent Planck observations of the filamentary cloud L1495 in Taurus show that the large-scale magnetic field is approximately perpendicular to the long axis of the cloud. We use the HAWC+ polarimeter on SOFIA to probe the complex magnetic field in the B211 part of the cloud. Our results reveal a dispersion of polarization angles of $36^\circ$, about five times that measured on a larger scale by Planck. Applying the Davis-Chandrasekhar-Fermi (DCF) method with velocity information obtained from IRAM 30m C$^{18}$O(1-0) observations, we find two distinct sub-regions with magnetic field strengths differing by more than a factor 3. The quieter sub-region is magnetically critical and sub-Alfv\'enic; the field is comparable to the average field measured in molecular clumps based on Zeeman observations. The more chaotic, super-Alfv\'enic sub-region shows at least three velocity components, indicating interaction among multiple substructures. Its field is much less than the average Zeeman field in molecular clumps, suggesting that the DCF value of the field there may be an underestimate. Numerical simulation of filamentary cloud formation shows that filamentary substructures can strongly perturb the magnetic field. DCF and true field values in the simulation are compared. Pre-stellar cores are observed in B211 and are seen in our simulation. The appendices give a derivation of the standard DCF method that allows for a dispersion in polarization angles that is not small, present an alternate derivation of the structure function version of the DCF method, and treat fragmentation of filaments., Comment: 27 pages, 12 figures

We present the B-fields mapped in IRDC G34.43+0.24 using 850\,$\mu$m polarized dust emission observed with the POL-2 instrument at JCMT. We examine the magnetic field geometries and strengths in the northern, central, and southern regions of the filament. The overall field geometry is ordered and aligned closely perpendicular to the filament's main axis, particularly in regions containing the central clumps MM1 and MM2, whereas MM3 in the north has field orientations aligned with its major axis. The overall field orientations are uniform at large (POL-2 at 14$\arcsec$ and SHARP at 10$\arcsec$) to small scales (TADPOL at 2.5$\arcsec$ and SMA at 1.5$\arcsec$) in the MM1 and MM2 regions. SHARP/CSO observations in MM3 at 350\,$\mu$m from Tang et al. show a similar trend as seen in our POL-2 observations. TADPOL observations demonstrate a well-defined field geometry in MM1/MM2 consistent with MHD simulations of accreting filaments. We obtained a plane-of-sky magnetic field strength of 470$\pm$190\,$\mu$G, 100$\pm$40\,$\mu$G, and 60$\pm$34\,$\mu$G in the central, northern and southern regions of G34, respectively, using the updated Davis-Chandrasekhar-Fermi relation. The estimated value of field strength, combined with column density and velocity dispersion values available in the literature, suggests G34 to be marginally critical with criticality parameter $\rm \lambda$ values 0.8$\pm$0.4, 1.1$\pm$0.8, and 0.9$\pm$0.5 in the central, northern, and southern regions, respectively. The turbulent motions in G34 are sub-Alfv\'{e}nic with Alfv\'{e}nic Mach numbers of 0.34$\pm$0.13, 0.53$\pm$0.30, and 0.49$\pm$0.26 in the three regions. The observed aligned B-fields in G34.43+0.24 are consistent with theoretical models suggesting that B-fields play an important role in guiding the contraction of the cloud driven by gravity., Comment: 16 pages, 10 figures, Accepted for publication in ApJ

The most accurate measurements of magnetic fields in star-forming gas are based on the Zeeman observations analyzed by Crutcher et al. (2010). We show that their finding that the 3D magnetic field scales approximately as density$^{0.65}$ can also be obtained from analysis of the observed line-of-sight fields. We present two large-scale AMR MHD simulations of several thousand $M_\odot$ of turbulent, isothermal, self-gravitating gas, one with a strong initial magnetic field (Alfven Mach number $M_{A,0}= 1$) and one with a weak initial field ($M_{A,0}=10$). We construct samples of the 100 most massive clumps in each simulation and show that they exhibit a power-law relation between field strength and density in excellent agreement with the observed one. Our results imply that the average field in molecular clumps in the interstellar medium is $ \sim 42 n_{H,4}^{0.65} \mu$G. Furthermore, the median value of the ratio of the line-of-sight field to density$^{0.65}$ in the simulations is within a factor of about (1.3, 1.7) of the observed value for the strong and weak field cases, respectively. The median value of the mass-to-flux ratio, normalized to the critical value, is 70% of the line-of-sight value. This is larger than the 50% usually cited for spherical clouds because the actual mass-to-flux ratio depends on the volume-weighted field, whereas the observed one depends on the mass-weighted field. Our results indicate that the typical molecular clump in the ISM is significantly supercritical (~ factor of 3). The results of our strong-field model are in very good quantitative agreement with the observations of Li et al. (2009), which show a strong correlation in field orientation between small and large scales. Because there is a negligible correlation in the weak-field model, we conclude that molecular clouds form from strongly magnetized (although magnetically supercritical) gas., Comment: 31 pages, 14 figures, MNRAS accepted

The intermittent dissipation of interstellar turbulence is an important energy source in the diffuse ISM. Though on average smaller than the heating rates due to cosmic rays and the photoelectric effect on dust grains, the turbulent cascade can channel large amounts of energy into a relatively small fraction of the gas that consequently undergoes significant heating and chemical enrichment. In particular, this mechanism has been proposed as a solution to the long-standing problem of the high abundance of CH+ along diffuse molecular sight lines, which steady-state, low temperature models under-produce by over an order of magnitude. While much work has been done on the structure and chemistry of these small-scale dissipation zones, comparatively little attention has been paid to relating these zones to the properties of the large-scale turbulence. In this paper, we attempt to bridge this gap by estimating the temperature and CH+ column density along diffuse molecular sight-lines by post-processing 3-dimensional MHD turbulence simulations. Assuming reasonable values for the cloud density (30 / cm^3), size (20 pc), and velocity dispersion (2.3 km / s), we find that our computed abundances compare well with CH+ column density observations, as well as with observations of emission lines from rotationally excited H2 molecules., Comment: 13 pages, 10 figures, accepted by MNRAS

We employ simulations of supersonic super-Alfvenic turbulence decay as a benchmark test problem to assess and compare the performance of nine astrophysical MHD methods actively used to model star formation. The set of nine codes includes: ENZO, FLASH, KT-MHD, LL-MHD, PLUTO, PPML, RAMSES, STAGGER, and ZEUS. We present a comprehensive set of statistical measures designed to quantify the effects of numerical dissipation in these MHD solvers. We compare power spectra for basic fields to determine the effective spectral bandwidth of the methods and rank them based on their relative effective Reynolds numbers. We also compare numerical dissipation for solenoidal and dilatational velocity components to check for possible impacts of the numerics on small-scale density statistics. Finally, we discuss convergence of various characteristics for the turbulence decay test and impacts of various components of numerical schemes on the accuracy of solutions. We show that the best performing codes employ a consistently high order of accuracy for spatial reconstruction of the evolved fields, transverse gradient interpolation, conservation law update step, and Lorentz force computation. The best results are achieved with divergence-free evolution of the magnetic field using the constrained transport method, and using little to no explicit artificial viscosity. Codes which fall short in one or more of these areas are still useful, but they must compensate higher numerical dissipation with higher numerical resolution. This paper is the largest, most comprehensive MHD code comparison on an application-like test problem to date. We hope this work will help developers improve their numerical algorithms while helping users to make informed choices in picking optimal applications for their specific astrophysical problems., Comment: 17 pages, 5 color figures, revised version to appear in ApJ, 735, July 2011

This paper describes ZEUS-MP, a multi-physics, massively parallel, message- passing implementation of the ZEUS code. ZEUS-MP differs significantly from the ZEUS-2D code, the ZEUS-3D code, and an early "version 1" of ZEUS-MP distributed publicly in 1999. ZEUS-MP offers an MHD algorithm better suited for multidimensional flows than the ZEUS-2D module by virtue of modifications to the Method of Characteristics scheme first suggested by Hawley and Stone (1995), and is shown to compare quite favorably to the TVD scheme described by Ryu et. al (1998). ZEUS-MP is the first publicly-available ZEUS code to allow the advection of multiple chemical (or nuclear) species. Radiation hydrodynamic simulations are enabled via an implicit flux-limited radiation diffusion (FLD) module. The hydrodynamic, MHD, and FLD modules may be used in one, two, or three space dimensions. Self gravity may be included either through the assumption of a GM/r potential or a solution of Poisson's equation using one of three linear solver packages (conjugate-gradient, multigrid, and FFT) provided for that purpose. Point-mass potentials are also supported. Because ZEUS-MP is designed for simulations on parallel computing platforms, considerable attention is paid to the parallel performance characteristics of each module. Strong-scaling tests involving pure hydrodynamics (with and without self-gravity), MHD, and RHD are performed in which large problems (256^3 zones) are distributed among as many as 1024 processors of an IBM SP3. Parallel efficiency is a strong function of the amount of communication required between processors in a given algorithm, but all modules are shown to scale well on up to 1024 processors for the chosen fixed problem size., Comment: Accepted for publication in the ApJ Supplement. 42 pages with 29 inlined figures; uses emulateapj.sty. Discussions in sections 2 - 4 improved per referee comments; several figures modified to illustrate grid resolution. ZEUS-MP source code and documentation available from the Laboratory for Computational Astrophysics at http://lca.ucsd.edu/codes/currentcodes/zeusmp2/