Search

The calibration process for a hybrid pixel detector designed for the High Energy Photon Source in China, called HEPS-BPIX, is presented in this article. The relationship between the energy and threshold is quantified for the threshold calibration based on a threshold scanning. For threshold trimming, a precise algorithm based on local digital to analog converter (LDAC) characteristics and a fast algorithm based on LDAC scanning are proposed in this article to study the performance of threshold digital to analog converters (DACs) that will be applied to pixels. The threshold dispersion was reduced from 46.28 mV without the algorithm to 6.78 mV with the precise algorithm, whereas it was 7.61 mV with the fast algorithm. For temperatures from 5 °C to 60 °C, the threshold dispersion of the precise algorithm varies in the range of 5.69 mV. In contrast, it is 33.21 mV with the fast algorithm, which can be recorrected to 1.49 mV. The measurement results show that the fast algorithm could obtain the applicable threshold dispersion for a silicon pixel module and took less time. In comparison, the precise algorithm could obtain better threshold dispersion but was time-consuming. The temperature dependence of the silicon pixel module noise was also studied to assess the detector working status. The minimum detectable energy threshold could be reduced to 0.83–4.36 keV at a temperature of 5 °C.

To provide the generic clock, trigger and control function and fulfill the data transmission performance requirement in high energy physics (HEP) experiments, a MicroTCA Fast Control board (uFC) was developed based on the Advanced Mezzanine Card (AMC) specification. Built around the Xilinx Kintex-7 FPGA, the uFC provides users with a platform with data memory, reference clock, trigger and SFP+ (Small Form-factor Pluggable) connections that are required in general experiment. In addition, it has access to two on-board FPGA Mezzanine Card (FMC) sockets with a large array of configurable I/O and high-speed links up to 10 Gbps. This paper presents test results from the first set of pre-production prototypes and reports on the application in High Energy Photon Source in China., Comment: 5 pages, 8 figures, proceedings of 21st IEEE Real Time Conference Colonial Williamsburg 9-15 June 2018

A Monte Carlo program based on Geant3 has been developed for BESII detector simulation. The organization of the program is outlined, and the digitization procedure for simulating the response of various sub-detectors is described. Comparisons with data show that the performance of the program is generally satisfactory., Comment: 17 pages, 14 figures, uses elsart.cls, to be submitted to NIMA