Search

As a result of extreme weather conditions, such as heavy precipitation, natural hillslopes can fail dramatically; these slope failures can occur on a dry day due to time lags between rainfall and pore-water pressure change at depth, or even after days to years of slow-motion. While the pre-failure deformation is sometimes apparent in retrospect, it remains challenging to predict the sudden transition from gradual deformation (creep) to runaway failure. We use a network science method -- multilayer modularity optimization -- to investigate the spatiotemporal patterns of deformation in a region near the 2017 Mud Creek, California landslide. We transform satellite radar data from the study site into a spatially-embedded network in which the nodes are patches of ground and the edges connect the nearest neighbors, with a series of layers representing consecutive transits of the satellite. Each edge is weighted by the product of the local slope (susceptibility to failure) measured from a digital elevation model and ground surface deformation (current rheological state) from interferometric synthetic aperture radar (InSAR). We use multilayer modularity optimization to identify strongly-connected clusters of nodes (communities) and are able to identify both the location of Mud Creek and nearby creeping landslides which have not yet failed. We develop a metric, community persistence, to quantify patterns of ground deformation leading up to failure, and find that this metric increases from a baseline value in the weeks leading up to Mud Creek's failure. These methods promise as a technique for highlighting regions at risk of catastrophic failure., Comment: 10 pages, 7 figures

While memory effects emerge from systems of wildly varying length- and time-scales, the reduction of a complex system with many interacting elements into one simple enough to be understood without also losing the complex behavior continues to be a challenge. Here, we investigate how bistable cylindrical origamis provide such a reduction via tunably-interactive memory behaviors. We base our investigation on folded sheets of Kresling patterns that function as two-state memory units. By linking several units, each with a selected activation energy, we construct a one-dimensional material that exhibits return-point memory. After a comprehensive experimental analysis of the relation between the geometry of the pattern and the mechanical response for a single bit, we study the memory of a bellows composed of 4 bits arranged in series. Since these bits are decoupled, the system reduces to the Preisach model and we can drive the bellows to any of its 16 allowable states by following a prescribed sequence of compression and extension. We show how to reasonably discriminate between states by measuring the system's total height and stiffness near equilibrium. Furthermore, we establish the existence of geometrically-disallowed defective stable configurations which expand the configuration space to 64 states with a more complex transition pattern. Using empirical considerations of the mechanics, we analyze the hierarchical structure of the corresponding diagram, which includes Garden of Eden states and subgraphs. We highlight two irreversible transformations, shifting and erasure of the defect, leading to memory behaviors reminiscent of those observed with more complex glassy systems., Comment: Submitted to PRResearch

The Earth's surface is composed of a staggering diversity of particulate-fluid mixtures: dry to wet, dilute to dense, colloidal to granular, and attractive to repulsive particles. This material variety is matched by the range of relevant stresses and strain rates, from laminar to turbulent flows, and steady to intermittent forcing, leading to anything from rapid and catastrophic landslides to the slow relaxation of soil and rocks over geologic timescales. Geophysical flows sculpt landscapes, but also threaten human lives and infrastructure. From a physics point of view, virtually all Earth and planetary landscapes are composed of soft matter, in the sense they are both deformable and sensitive to collective effects. Geophysical materials, however, often involve compositions and flow geometries that have not yet been examined in physics. In this review we explore how a soft-matter perspective has helped to illuminate, and even predict, the rich dynamics of Earth materials and their associated landscapes. We also highlight some novel phenomena of geophysical flows that challenge, and will hopefully inspire, more fundamental work in soft matter.

Flow-stabilized solids are a class of fragile matter that forms when a dense suspension of colloids accumulates against a semi-permeable barrier, for flow rates above a critical value. In order to probe the effect of particle size on the formation of these solids, we perform experiments on micron-sized monodisperse spherical polystyrene spheres in a Hele-Shaw geometry. We examine the spatial extent, internal fluctuations, and fluid permeability of the solids deposited against the barrier, and find that these do not scale with the P\'eclet number. Instead, we find distinct behaviors at higher Peclet numbers, suggesting a transition from thermal- to athermal-solids which we connect to particle-scale fluctuations in the liquid-like layer at the upstream surface of the solid. We further observe that while the Carman-Kozeny model does not accurately predict the permeability of flow-stabilized solids, we do find a new scaling which predicts the permeability.

A droplet of surfactant spreading on an ultrasoft ($E \lesssim 100$ Pa) gel substrate will produce capillary fractures at the gel surface; these fractures originate at the contact-line and propagate outwards in a starburst pattern. There is an inherent variability in both the number of fractures formed and the time delay before fractures form. In the regime where single fractures form, we observe a Weibull-like distribution of delay times, consistent with a thermally-activated process. The shape parameter is close to 1 for softer gels (a Poisson process), and larger for stiffer gels (indicative of aging). For single fractures, the characteristic delay time is primarily set by the elastocapillary length of the system, calculated from the differential in surface tension between the droplet and the substrate, rather than the elastic modulus as for stiffer systems. For multiple fractures, all fractures appear simultaneously and long delay times are suppressed. The delay time distribution provides a new technique for probing the energy landscape and fracture toughness of ultrasoft materials.

Optically-transparent immersion liquids with refractive index (n ~ 1.77) to match sapphire-based aplanatic numerical aperture increasing lens (aNAIL) are necessary for achieving deep 3D imaging with high spatial resolution. We report that antimony tribromide (SbBr$_{3}$) salt dissolved in liquid diiodomethane (CH$_{2}$I$_{2}$) provides a new high refractive index immersion liquid for optics applications. The refractive index is tunable from n = 1.74 (pure) to n = 1.873 (saturated), by adjusting either salt concentration or temperature; this allows it to match (or even exceed) the refractive index of sapphire. Importantly, the solution gives excellent light transmittance in the ultraviolet to near-infrared range, an improvement over commercially-available immersion liquids. This refractive index matched immersion liquid formulation has enabled us to develop a sapphire-based aNAIL objective that has both high numerical aperture (NA = 1.17) and long working distance (WD = 12 mm). This opens up new possibilities for deep 3D imaging with high spatial resolution.

Entropy is a difficult concept to teach using real-world examples. Unlike temperature, pressure, volume, or work, it's not a quantity which most students encounter in their day-to-day lives. Even the way entropy is often qualitatively described, as a measure of disorder, is incomplete and can be misleading. In an effort to address these obstacles, we have developed a simple laboratory activity, the stretching of an elastic rubber sheet, intended to give students hands-on experience with the concepts of entropy, temperature and work in both adiabatic and quasistatic processes. We present two versions of the apparatus: a double-lever system, which may be reproduced with relatively little cost, and a commercial materials testing system, which provides students experience with scientific instrumentation that is used in research., Comment: Submitted to the American Journal of Physics

Thermal fluctuations, geometric exclusion, and external driving all govern the mechanical response of dense particulate suspensions. Here, we measure the stress-strain response of quasi-two-dimensional flow-stabilized microsphere heaps in a regime in which all three effects are present using a microfluidic device. We observe that the elastic modulus and the mean interparticle separation of the heaps are tunable via the confining stress provided by the fluid flow. Furthermore, the measured stress-strain curves exhibit a universal nonlinear shape which can be predicted from a thermal van der Waals equation of state with excluded volume. This analysis indicates that many-body interactions contribute a significant fraction of the stress supported by the heap.