Search

Objective: To describe the prevalence of elbow dysplasia (ED) in 13 dog breeds in France., Animals: A total of 18,870 elbow radiographs taken from 2002 to 2022 were evaluated by 2 independent examiners., Methods: For each breed, the incidence of each of the 4 International Elbow Working Group scoring classes was extracted from the database. Breeds were excluded if fewer than 150 radiographs had been read for that breed., Results: This study included 17,861 records for 13 dog breeds: American Akita, Alaskan Malamute, Old German Shepherd (Altdeutscher Schäferhund), American Staffordshire Terrier, Australian Shepherd, Belgian Shepherd, White Swiss Shepherd, Bernese Mountain Dog, Cane Corso, Czechoslovakian Wolfdog, Rhodesian Ridgeback, Rottweiler, and Dogue de Bordeaux. The overall prevalence of ED was 11.4%, ranging from 1.1% in the Czechoslovakian Wolfdog to 32.2% in the Dogue de Bordeaux. The Dogue de Bordeaux, Rottweiler, Bernese Mountain Dog, and Cane Corso breeds were most commonly affected by ED. The prevalence of ED was significantly higher in male dogs than in female dogs (17.5% vs 10.5%, P < .05). Joint incongruity and fragmented coronoid process were the 2 most common primary ED lesions identified. The prevalence of ED among the dogs evaluated decreased over the timeframe of the study., Clinical Relevance: The results of this study help to clarify the prevalence of ED in different breeds in France. These data should be interpreted with caution as this study included a small percentage of the total number of dogs born for each breed in France over the study period.

Objective: To report indications, outcomes, and complications with a precontoured angle-stable interlocking nail (CAS-ILN)., Animals: 90 client-owned animals., Methods: Dogs and cats treated with the CAS-ILN between 2020 and 2022 were retrospectively reviewed. Collected data included body weight, fracture configuration, percentage of medullary canal filled, limb alignment, complications, and follow-up. Favorable outcomes were defined when full functional restoration was observed., Results: Thirty-eight dogs and 52 cats were included. Median body weight was 4.3 kg (range, 1.5 to 6.7 kg) for cats and 25 kg (range, 6.8 to 54 kg) for dogs. A total of 54 femurs, 31 tibias, and 5 humeri were treated, including 65 comminuted fractures and 26 metaphyseal fractures. The median percentage of medullary canal occupied by the nail was 76.5% (range, 53% to 97.6%). Radiographic postoperative bone alignment was good in 85.5% (59/69) and satisfactory in 10 cases. The median duration of follow-up (57/90) was 476 days (range, 56 to 1,057 days). In the perioperative period (0 to 12 weeks), lameness had resolved or was mild in all (51/52) but 1 case. In the long-term postoperative period (> 12 months), 97.1% (34/35) of cases showed restoration of full function and 1 case had an unacceptable function. An overall complication rate of 11.5% (7/61) was reported including 1 catastrophic and 6 major complications., Clinical Relevance: Long-term functional outcomes following the CAS-ILN were favorable in 97.1% (34/35) of cases. Complication rates were comparable to previous studies. The CAS-ILN appears to be an alternative surgical option for most long-bone fracture repairs.

Objective: To assess the effect of arthroscopic partial meniscectomy in dogs with bucket handle meniscal tears and tibial plateau leveling osteotomy (TPLO), compared with dogs with cranial cruciate ligament rupture and no meniscal tear treated by TPLO alone., Animals: 30 client-owned dogs with cranial cruciate rupture treated by either TPLO and arthroscopy alone if the meniscus was normal (normal meniscus [NM] group, n = 14) or by TPLO and an arthroscopic partial meniscectomy if a bucket handle tear was diagnosed (meniscal tear [MT] group, n = 16)., Methods: Medical records, lameness score, and symmetry gait analysis parameters were retrospectively collected from patient records preoperatively (PreO), then at 1, 3, and 6 months postoperatively (M1, M3, and M6, respectively). Osteoarthritic (OA) radiographic score was performed and compared at PreO and M6., Results: PreO gait analysis parameters were lower in the MT group (P < 0.005). In the MT group, the lameness score significantly improved between PreO and M1, and there were no significant differences between groups at M6. OA score was significantly higher in the MT group at PreO and M6. However, postoperative progression of OA did not differ between the 2 groups (P = 0.16)., Clinical Relevance: Treatment for meniscal tear results in a significant improvement in lameness, with postoperative outcomes at 6 months comparable with dogs with intact menisci. Despite having significant osteoarthritic lesions at all time points, the progression of osteoarthritis is similar between dogs with meniscal tears and those with intact menisci.

Objective: To compare the in vitro stability of acetabular cups with peripherally reinforced fixation in a model of uncemented total hip replacement in dogs., Sample: 63 polyurethane foam blocks and 3 acetabular implant designs: hemiellipsoidal (Model A) and 2 models with equatorial peripheral fins (Model B with 1 level and Model C with 2 levels of fins)., Methods: 2 loading patterns-edge loading and push-out tests-were performed until failure and peak forces were recorded. Implantation behavior was visually assessed and the required seating force was assessed using a force-displacement curve., Results: Model B showed significantly lower peak force than Model A in edge loading tests with standardized impaction. In the push-out test, Model A had a greater maximal force than Models B and C, with mean maximal forces of 213.7 N, 139.4 N, and 138.9 N, respectively. In the seating force test, Models B and C required a higher force for 2-mm deep implantation (362.0 N and 361.6 N, respectively) than Model A (194.4 N), and were associated with dorsal tilting of the components., Clinical Relevance: Our results suggest that cups with a peripheral design (B, C) have less primary stability than hemiellipsoidal cups (A). Furthermore, models with peripheral fins (B, C) appeared to have incomplete seating if a higher force was not used during implantation and, therefore, the risk of malpositioning was increased. These data indicate that hemiellipsoidal cups provide the same or better initial stability and require a lower impaction force.

Objective: To compare ex vivo postimplantation biomechanical characteristics of 3 implants for canine total hip replacement: a cementless press-fit femoral stem with a pin in the femoral neck (p-pfFS), a press-fit cementless femoral stem without this pin (pfFS), and a cemented femoral stem (cFS)., Sample: 18 cadaveric femurs from 9 dogs., Procedures: Femurs were assigned randomly to 3 groups, and biomechanical testing was performed by measuring vertical displacement during cyclic loading and resistance to failure with compression parallel to the longitudinal axis of the femur. Force-displacement curves were assessed for failure tests, and work necessary for failure was calculated., Results: No significant differences were observed in vertical displacement during cyclic loading (P = .263) or work necessary for failure (P = .079). Loads to failure for cFS and p-pfFS implants were significantly greater than that for the pfFS, but no significant difference in load to failure was observed between cFS and p-pfFS implants (P = .48)., Clinical Relevance: Cementless femoral stems with a transfixation pin offer significantly greater immediate resistance to failure to compressive loads parallel to the longitudinal axis of the femur than standard cementless stems, and a level of stability comparable to that of cemented stems. p-pfFS implants may be valuable in total hip replacement, potentially reducing the risk of fracture during the early postoperative period prior to osteointegration.

Objective: Interarcuate branch (IAB) is a vascular structure, particularly developed in C2-3 intervertebral space, forming a dorsal bridge that connects ventral venous plexi in the vertebral canal. While precisely described in the human, the precise anatomical features of IABs have not been reported in the veterinary literature. The purpose of this study is to describe the features and relations of IABs in the C2-3 vertebral canal., Animals: 10 dogs were enrolled; 5 dogs for necropsy and 5 dogs for histology., Procedures: The ventral venous plexi in the cervical spine of 5 dogs were injected with latex and underwent vertebral canal dissection for visual assessment of the IAB. Two out of 5 dogs were injected with the addition of barium sulfate and underwent a CT scan. The C2-3 regions of 5 small-breed dogs were harvested for histological examinations., Results: IABs arose from the ventral venous plexus at the level of the intervertebral vein; they originated from 2 separate branches located caudally and cranially to the intervertebral foramen, forming a ventrodorsal triangle surrounding the spinal nerve root. No dorsal anastomosis was observed on the CT scan nor at dissection but were observed histologically. A cervical fibrous sheath was observed all around the vertebral canal., Clinical Relevance: IABs are voluminous venous structures at the C2-3 intervertebral space in dogs and found within a split of the cervical fibrous sheath, which is adherent to the interarcuate ligament and the ligamentum flavum. This anatomical description is paramount when planning an approach to the C2-3 intervertebral space.

OBJECTIVE To assess use of a new radiographic method to determine the distance by which the tibial tuberosity should be advanced to reduce the patellar tendon-tibial plateau angle (PTA) to 90° by means of the modified Maquet technique (MMT) in dogs. SAMPLE 24 pelvic limbs from 12 adult medium-sized to large-breed canine cadavers. PROCEDURES Radiographs of stifle joints at 135° extension in true lateral position were used to determine tibial tuberosity advancement distances for use in the MMT. A method was devised to incorporate the planned osteotomy axis; distal patellar translations of 0, 3, 5, or 10 mm; and advancement cage implant application level along the osteotomy site in advancement planning measurements. Concordance correlation coefficients (CCCs) were calculated to compare these adjusted advancement measurements with true advancement measurements obtained for the same joints in another study after treatment by MMT. Intraobserver, interobserver, and total agreement for selected measurements were determined by assessment of CCCs for results obtained by 3 blinded observers. RESULTS Agreement between true advancement measurements and measurements obtained with osteotomy axis and cage position method calculations that incorporated a 5-mm distal patellar translation distance was excellent (CCC, 0.96). Intraobserver and interobserver agreements for the planning measurements evaluated were good to excellent (CCC, 0.83 to 0.96). CONCLUSIONS AND CLINICAL RELEVANCE Results suggested that the osteotomy axis and cage position method incorporating a 5-mm distal patellar translation distance has the potential to improve success rates for achieving a PTA of 90° in medium-sized to large-breed dogs undergoing MMT for treatment of cranial cruciate ligament rupture. Further research is warranted.

OBJECTIVE To evaluate the validity of 2 radiographic methods for measurement of the tibial tuberosity advancement distance required to achieve a reduction in patellar tendon-tibial plateau angle (PTA) to the ideal 90° in dogs by use of the modified Maquet technique (MMT). SAMPLE 24 stifle joints harvested from 12 canine cadavers. PROCEDURES Radiographs of stifle joints placed at 135° in the true lateral position were used to measure the required tibial tuberosity advancement distance with the conventional (A M ) and correction (A E ) methods. The MMT was used to successively advance the tibial crest to A M and A E . Postoperative PTA was measured on a mediolateral radiograph for each advancement measurement method. If none of the measurements were close to 90°, the advancement distance was modified until the PTA was equal to 90° within 0.1°, and the true advancement distance (TA) was measured. Results were used to determine the optimal commercially available size of cage implant that would be used in a clinical situation. RESULTS Median A M and A E were 10.6 mm and 11.5 mm, respectively. Mean PTAs for the conventional and correction methods were 93.4° and 92.3°, respectively, and differed significantly from 90°. Median TA was 13.5 mm. The A M and A E led to the same cage size recommendations as for TA for only 1 and 4 stifle joints, respectively. CONCLUSIONS AND CLINICAL RELEVANCE Both radiographic methods of measuring the distance required to advance the tibial tuberosity in dogs led to an under-reduction in postoperative PTA when the MMT was used. A new, more accurate radiographic method needs to be developed.