Search

We conducted large-scale molecular dynamics (MD) simulations of shock wave propagation and spallation in amorphous polyurethane and polyurea. First, we computed the shock Hugoniot of the polymers using the multiscale shock technique and compared them with available experimental data to establish the upper limit of the shock pressure that can be accurately modeled using a non-reactive interatomic force field. Subsequently, we simulated shock wave propagation in the polymers, varying the shock particle velocity from 0.125 km/s to 2 km/s. A remarkable similarity in the shock behavior of polyurethane and polyurea was observed. The spall strength of each sample was computed by two methods: (a) the indirect method (based on the free surface velocity history)--accessible in experiments and (b) a direct method (based on the atomic stresses in the region of spallation)--accessible only through MD. The results reveal that the tensile strength computed from the indirect method is consistently smaller than the value obtained from the direct method. Moreover, the strength computed from the indirect method shows a noticeable agreement with the fracture nucleation stress. Our results provide novel molecular-level insights into the spallation mechanisms of amorphous polymers, which could facilitate the design of polymers for structural barrier applications. [ABSTRACT FROM AUTHOR]

We conducted large-scale molecular dynamics (MD) simulations of shock wave propagation and spallation in amorphous polyurethane and polyurea. First, we computed the shock Hugoniot of the polymers using the multiscale shock technique and compared them with available experimental data to establish the upper limit of the shock pressure that can be accurately modeled using a non-reactive interatomic force field. Subsequently, we simulated shock wave propagation in the polymers, varying the shock particle velocity from 0.125 km/s to 2 km/s. A remarkable similarity in the shock behavior of polyurethane and polyurea was observed. The spall strength of each sample was computed by two methods: (a) the indirect method (based on the free surface velocity history)--accessible in experiments and (b) a direct method (based on the atomic stresses in the region of spallation)--accessible only through MD. The results reveal that the tensile strength computed from the indirect method is consistently smaller than the value obtained from the direct method. Moreover, the strength computed from the indirect method shows a noticeable agreement with the fracture nucleation stress. Our results provide novel molecular-level insights into the spallation mechanisms of amorphous polymers, which could facilitate the design of polymers for structural barrier applications. [ABSTRACT FROM AUTHOR]

Tensile testing is an essential experiment to assess the mechanical integrity of musculoskeletal soft tissues, yet standard test methods have not been developed to ensure the quality and reproducibility of these experiments. The ASTM International standards organization has created tensile test standards for common industry materials that specify geometric dimensions of test specimens (coupons) that promote valid failures within the gage section (midsubstance), away from the grips. This study examined whether ASTM test standards for plastics, elastomers, and fiber-reinforced composites are suitable for tensile testing of bovine meniscus along the circumferential fiber direction. We found that dumbbell (DB) shaped coupons based on ASTM standards for elastomers and plastics had an 80% and 60% rate of midsubstance failures, respectively. The rate of midsubstance failures dropped to 20% when using straight (ST) coupons based on ASTM standards for fiber-reinforced composites. The mechanical properties of dumbbell shaped coupons were also significantly greater than straight coupons. Finite element models of the test coupons revealed stress distributions that supported our experimental findings. In addition, we found that a commercial deli-slicer was able to slice meniscus to uniform layer thicknesses that were within ASTM dimensional tolerances. This study provides methods, recommendations, and insights that can advance the standardization of tensile testing in meniscus and other soft fibrous tissues. [ABSTRACT FROM AUTHOR]

An evaluation of wound mechanics is crucial in reflecting the wound healing status. The present study examined the biomechanical properties of healing rat skin wounds in vivo and ex vivo. Thirty male Sprague-Dawley rats, each with a 6 mm full-thickness circular punch biopsied wound at both posterior hind limbs were used. The mechanical stiffness at both the central and margins of the wound was measured repeatedly in five rats over the same wound sites to monitor the longitudinal changes over time of before wounding, and on days 0, 3, 7,10, 14, and 21 after wounding in vivo by using an optical coherence tomography-based air-jet indentation system. Five rats were euthanized at each time point, and the biomechanical properties of the wound tissues were assessed ex vivo using a tensiometer. At the central wound bed region, the stiffness measured by the air-jet system increased significantly from day 0 (17.2%), peaked at day 7 (208.3%), and then decreased progressively until day 21 (40.2%) as compared with baseline prewounding status. The biomechanical parameters of the skin wound samples measured by the tensiometer showed a marked reduction upon wounding, then increased with time (all p<0.05). On day 21, the ultimate tensile strength of the skin wound tissue approached 50% of the normal skin; while the stiffness of tissue recovered at a faster rate, reaching 97% of its prewounded state. Our results suggested that it took less time for healing wound tissues to recover their stiffness than their maximal strength in rat skin. The stiffness of wound tissues measured by air-jet could be an indicator for monitoring wound healing and contraction. [ABSTRACT FROM AUTHOR]