Search

One of the main challenges in rigid riser design for Brazilian Pre-salt is the fatigue limit state. At this new production frontier, some key points are imposed as a challenge for riser designers, mainly due to the high level of motions imposed by the FPSO at the riser top in a coupled system with water depth around 2200 meters, and thicker riser’s thermal insulation demanded for flow assurance (which worsens the dynamic response of production risers). Additionally, high contaminant levels in the fluid (CO2 & H2S) demands CRA materials. Within this context, Petrobras has been considering Steel Lazy Wave Riser (SLWR) configuration as a base case scenario for rigid riser projects, since this configuration is able to absorb part of the FPSO motions that would reach the touch down zone (TDZ) and, consequently, making this region much less demanded when compared against Steel Catenary Risers (SCR). In its pioneer deepwater SLWR [1], Petrobras adopted a conservative approach for fatigue assessment that involved degenerated SN curves from DNV-RP-C203, i.e. D curve in cathodic protection with the slope changing point (SCP) shifted to 5 × 106 for external wall and F1 curve in air with SCP at 5 × 107 for internal wall. More recently, both DNVGL and BSI have reviewed their fatigue assessment codes and no longer holds parity between SN curves. BS-7608 Ed. 2014 introduced different SCPs in order to account for a possible non-conservativeness in the assessment of low stresses under variable amplitude in the loading spectra. DNVGL-RP-C203 Ed. 2016 now presents three different bilinear SN curves for the internal wall of pipelines and risers that depends on weld misalignment, while it keeps SCP unchanged. This paper presents a recent case study for a typical SLWR configuration in pre-salt, in order to evaluate the impact of the changes proposed by the new versions of these design codes in the fatigue life of riser girth welds. Results of this work showed that the impact of different positioning of slope changing points in SN curves can have a great importance for riser design, since typical load spectrum lies around this region. Fatigue life could be increased up to twice or three times if one of these codes are adopted instead of the Shifted SN curves. However, the effect of low stresses under variable amplitude loading spectra is still a concern and it should be further investigated.

Current data measured by an instrumented mooring line deployed at the Santos Basin, in a water depth of 2200 m, show a mean velocity of 0.20 m/s with no preferential direction. Extreme current events detected were associated with the presence of a pair of eddies with a dipole configuration. The jet stream created by the interaction of the cyclone-anticyclone pair was able to generate speeds up to 1.2 m/s at the first hundred meters of the water column. An investigative study with sea surface height anomaly fields processed from environmental satellites clearly shows the eddy structure during extreme current events.Copyright © 2012 by ASME