Search

The article discusses a study conducted to assess the effectiveness of steady vortex-generator jets (VGJs) for separation control in high-speed flow. Topics discussed include methods used to conduct the experiment, exploration of compressibility effects on flow control for low-pressure turbine (LPTs) and consideration of effects of roughness. The results show factors affecting the performance of steady VGJs on shock-induced separation control such as change of boundary layer.

Efforts to reduce blade count and avoid boundary layer separation have led to low-pressure turbine airfoils with significant increases in loading as well as front-loaded pressure distributions. These features have been independently shown to increase losses within the secondary flow field at the end wall. Compound angle blowing from discrete jets on the blade suction surface near the end wall has been shown to be effective in reducing these increased losses and enabling the efficient use of highly loaded blade designs. In this study, experiments are performed on the front loaded L2F low-pressure turbine airfoil in a linear cascade. The required mass flow is reduced by decreasing the hole count from previous configurations and from the introduction of unsteady blowing. The effects of pulsing frequency and duty cycle are investigated using phase-locked stereo particle image velocimetry to demonstrate the large scale movement and hysteresis behavior of the passage vortex interacting with the pulsed jets. Total pressure loss contours at the cascade outlet demonstrate that the efficiency benefit is maintained with the use of unsteady forcing. [ABSTRACT FROM AUTHOR]

The mechanism of separation control by sound excitation is investigated on the aft-loaded low-pressure turbine (LPT) blade profile, the L1A, which experiences a large boundary layer separation at low Reynolds numbers. Previous work by the authors has shown that on a laminar separation bubble such as that experienced by the front-loaded L2F profile, sound excitation control has its best performance at the most unstable frequency of the shear layer due to the exploitation of the linear instability mechanism. The different loading distribution on the L1A increases the distance of the separated shear layer from the wall and the exploitation of the same linear mechanism is no longer effective in these conditions. However, significant control authority is found in the range of the first subharmonic of the natural unstable frequency. The amplitude of forced excitation required for significant wake loss reduction is higher than that needed when exploiting linear instability, but unlike the latter case, no threshold amplitude is found. The fluid-dynamics mechanisms under these conditions are investigated by particle image velocimetry (PIV) measurements. Phase-locked PIV data gives insight into the growth and development of structures as they are shed from the shear layer and merge to lock into the excited frequency. Unlike near-wall laminar separation sound control, it is found that when such large separated shear layers occur, sound excitation at subharmonics of the fundamental frequency is still effective with high-Tu levels. [ABSTRACT FROM AUTHOR]

An experimental investigation of the effect of acoustic excitation on the boundary layer development of a highly loaded low-pressure turbine blade at low-Reynolds number is investigated. The aim of this work is to study the effect of excitation at select frequencies on separation which could give indications about active flow control exploitation. The front-loaded L2F blade is tested in a low-speed linear cascade. The uncontrolled flow presents a separation bubble on the suction surface at Reynolds numbers below 40,000. For these conditions, the instability of the shear layer is documented using hot-wire ane-mometry. A loudspeaker upstream of the cascade is directed towards the passage inlet section. A parametric study on the effect of amplitude and frequency is carried out. The effect of the excitation frequency is observed to delay separation for a range of frequen-cies. However, the control authority of sound is found to be most effective at the funda-mental frequency of the shear layer. The amplitude of perturbation is significant in the outcome of control until a threshold value is reached. PIV measurements allow a deeper understanding of the mechanisms leading to the reduction of separation. Data has been acquired with a low inlet turbulence level (<1%) in order to provide a cleaner environ-ment which magnifies the effects of the excitation frequency, and with an increased turbulence intensity level of 3% which is representative of more typical engine values. Integrated wake loss values are also presented to evaluate the effect on blade performance. [ABSTRACT FROM AUTHOR]