Search

A hand-calculation method for estimation of nonlinear load–settlement response of piled raft foundations (PRFs) embedded in sandy soils is developed using three-dimensional finite-element (FE) analysis in which the elastoplastic constitutive behavior of the soil is modeled using the unified Clay And Sand Model (CASM). Three types of PRFs with rectangular, strip, and circular rafts and with a variety of pile dimensions and arrangements are considered in the study. The PRFs are assumed to be embedded in five different sands (Ottawa sand, Erksak sand, Sacramento sand, Portaway sand, and Decomposed Granite sand) with different elastic properties, critical state parameters, and relative densities. Systematic parametric studies are performed to develop equations for the estimation of the average nonlinear settlement of PRFs. The maximum and differential settlements are also estimated from the average settlement. The proposed equations require the relative density, elastic constants, and critical state friction angle of sand, and the piled raft geometry and properties as inputs. The settlement equations are applicable to PRFs of sizes similar to those considered in the study and can be used by practitioners for quick, initial estimation of PRF settlement as part of design calculations. [ABSTRACT FROM AUTHOR]

The present research intends to study the effects of the seismic soil-pile-structure interaction (SSPSI) on the dynamic response of buildings with various heights by conducting a series of shaking table tests on 5-, 10-story, and 15-story model structures. Two types of foundations for each case are investigated, including (1) a fixed-base structure, representing the situation excluding the soil-structure interaction; and (2) a structure supported by an end-bearing pile foundation in soft soil. An advanced laminar soil container has been designed that uses three-dimensional numerical modeling to minimize the boundary effects and to simulate free-field motion during the shaking table tests. Four real earthquake events, including Kobe 1995, Northridge 1994, El Centro 1940, and Hachinohe 1968, are imposed to each model. According to the experimental measurements, it is observed that the SSPSI amplifies the maximum lateral deflections and in turn interstory drifts of the structures supported by end-bearing pile foundations in comparison with the fixed-base structures. The rocking component plays an important role in increasing the lateral deflection of the superstructures, which can shift the performance level of the structures to near collapse or even collapse levels and as a result should be assessed precisely in the seismic design of buildings resting on soft soils. [ABSTRACT FROM AUTHOR]

This study presents a centrifuge modeling approach to characterize the transient thermomechanical response of energy foundations during heating-cooling cycles to provide data for calibration and validation of soil-structure interaction models. This study focuses on the response of a scale-model energy foundation installed in an unsaturated silt layer with end-bearing boundary conditions. The foundation response was assessed using embedded strain gauges and thermocouples. Other variables monitored include foundation head displacements, soil surface displacements, and changes in temperature and volumetric water content in the unsaturated silt at different depths and radial locations. Measurements during the initial heating process indicate that the thermal axial stress is greater near the toe of the foundation as a result of the restraint associated with mobilization of side shear resistance along the length of the foundation. The thermal axial strains were close to the free-expansion thermal strain near the soil surface and decreased with depth. The thermal axial displacements calculated by integrating the thermal axial strains correspond well with the independently measured head displacements. The mobilized side stresses calculated from the thermal axial stresses increased with height and were consistent with the shear strength of unsaturated silt. During successive heating-cooling cycles, slight decreases in upward thermal head displacement were observed because of changes in the stiffness of the unsaturated soil from thermally induced water flow away from the foundation and potential downdrag effects. However, little change in the thermal axial stress was observed during the heating-cooling cycles. [ABSTRACT FROM AUTHOR]

The principal objective of this study is the development and calibration of a macroelement model for soil-pile interaction under simultaneously applied lateral and vertical loads. Herein, we focus on cast-in-drilled-hole single piles that are partially or fully embedded in soil, which are frequently used as support structures in highway construction. The model is calibrated and verified using primarily three-dimensional finite-element simulations and, whenever possible, with experimental data obtained from open literature. These data indicate that lateral loads significantly affect the vertical response of single piles, whereas the converse coupling is negligible. The proposed macroelement model is capable of mimicking this phenomenon. As such, it is a computationally efficient alternative to finite-element analyses, and is feasible to be utilized in practical applications. [ABSTRACT FROM AUTHOR]