Search

A novel and inexpensive fabrication method of multiferroic nanocomposite films via liquid-phase formation is demonstrated in this work. Well-aligned anodized TiO₂ nanotube arrays on a Ti substrate were used as the core template. The anodized TiO₂ nanotube arrays were then hydrothermally treated in Ba(OH)₂ aqueous solution to form BaTiO₃ (BTO) nanotube arrays. The average pore diameter and thickness of the BTO nanotube arrays obtained were approximately 50~70 nm and 2~4 μ m, respectively. The BTO nanotube arrays were then dip-coated with CoFe₂O₄ (CFO) sol with the assistance of vaccum impregnation equipment to enable the penetration of CFO sol into the tubular pores of the BTO nanotube arrays. The good distribution of CFO in the BTO nanotube arrays was confirmed by electron microscopy accompanied with elemental analysis. The good crystallinity of CFO and BTO in the nanocomposite was confirmed by X-ray diffraction, and the nanocomposite film exhibited anisotropic ferrimagnetic properties upon an in plane and out-plane applied magnetic field.

Novel decoration of high aspect ratio zinc oxide nanowires (ZnO NWs) with noble metals such as Ag and Au nanoparticles (NPs) was demonstrated in this work. A facile method of chemical deposition with good controllability, as well as good homogeneity would be a huge advantage towards large scale fabrication. The highlight of this work is the feasibility of multiple component decoration such as a hybrid (co-exist) Ag-Au NPs decorated ZnO NWs formation that could be beneficial towards the development of nanoarchitectured materials with the most desired properties. The local surface plasmon effect (LSPR) of Ag and Au NPs were confirmed using extinction spectra and significant photoelectrochemical conversion efficiency (PCE) enhancement of dye-sensitized solar cells (DSSCs) was achieved. The Ag-NPs and hybrid Ag-Au NPs decorated ZnO NWs marked an impressive 125 and 240% efficiency improvement against pure ZnO NWs. The improved dye light extinction resulted from the LSPR effect that had enabled greater electron generation leading to improved PCE. As the complex design of oxides' nanoarchitectures have reached a point of saturation, this novel method would enable further enhancement in their photoelectrochemical properties through decoration with noble metals via a simple chemical deposition route.

Small sized electrocatalysts, which can be obtained by rapid nucleation and high supersaturation are imperative for outstanding methanol oxidation reaction (MOR). Conventional microwave synthesis processes of electrocatalysts include ultrasonication, stirring, pH adjustment, and microwave irradiation of the precursor mixture. Ethylene glycol (EG), which serves as a reductant and solvent was added during the ultrasonication or stirring stage. However, this step and pH adjustment resulted in unintended multi-stage gradual nucleation. In this study, the microwave reduction approach was used to induce rapid nucleation and high supersaturation in order to fabricate small-sized reduced graphene oxide-supported palladium (Pd/rGO) electrocatalysts via the delayed addition of EG, elimination of the pH adjustment step, addition of sodium carbonate (Na₂CO₃), prior microwave irradiation of the EG mixed with Na₂CO₃, and addition of room temperature precursor mixture. Besides its role as a second reducing agent, the addition of Na₂CO₃ was primarily intended to generate an alkaline condition, which is essential for the high-performance of electrocatalysts. Moreover, the microwave irradiation of the EG and Na₂CO₃ mixture generated highly reactive free radicals that facilitate rapid nucleation. Meanwhile, the room temperature precursor mixture increased supersaturation. Results showed improved electrochemically active surface area (78.97 m² g -1 , 23.79% larger), MOR (434.49 mA mg -1 , 37.96% higher) and stability.

Crystalline 2-D (dimensional) ZnO nanosheets were formed by rapid thermal oxidation of etched Zn foil in oxygen at 300 degrees C and 400 degrees C. Short oxidation time was varied from 10, 20 and 30 min. The morphologies and optical properties of the ZnO nanosheets evolved with the oxidation temperature and time. At 300 degrees C, ZnO nanosheets with thickness ranging from 32 nm to 80 nm were obtained while at 400 degrees C, the thickness of the nanosheets increased from 88 nm to approximately 200 nm after 10 and 30 min of oxidation, respectively. The surface roughness of the ZnO nanosheets and grain size increased with oxidation time and temperature. Photoluminescence of the oxidized samples shows ultraviolet (UV) and visible emissions indicating good crystallinity of ZnO which was further confirmed by high-resolution transmission electron microscope observation of ZnO wurtzite interplanar spacing. Photocatalytic activity of ZnO was also investigated by using degradation of methyl orange (MO) and all the samples exhibit photocatalytic activity. The sample oxidized at 400 degrees C for 10 min show better MO degradation after 2 h of exposure due to higher surface area and better crystallinity of the ZnO nanosheets obtained.