Search

Operational experience of a 500 kV photoemission gun at the compact energy recovery linac (cERL) of the High Energy Accelerator Research Organization is presented. The gun, developed at the Japan Atomic Energy Agency, was found to have failures in two out of the ten-segment ceramic insulator just after installation at cERL. The gun had been operated at 390 kV with eight segments until April 2015 and provided a 0.9 mA beam. An additional two-segment insulator was installed on the top of the existing insulators to recover the high-voltage performance. The gun was then conditioned up to 539 kV and has been operated stably at 500 kV. No discharge caused by the gun itself was observed at 500 kV once the high threshold voltage for stable operation exceeded 500 kV. A dark current of a few picoamperes was generated at 500 kV from a photocathode puck with a semiconducting wafer, while no dark current was observed without a semiconducting wafer. Stable generation of a 500 keV beam with current greater than 0.8 mA was demonstrated for more than two hours.

Operational experience of a 500 kV photoemission gun at the compact energy recovery linac (cERL) of the High Energy Accelerator Research Organization is presented. The gun, developed at the Japan Atomic Energy Agency, was found to have failures in two out of the ten-segment ceramic insulator just after installation at cERL. The gun had been operated at 390 kV with eight segments until April 2015 and provided a 0.9 mA beam. An additional two-segment insulator was installed on the top of the existing insulators to recover the high-voltage performance. The gun was then conditioned up to 539 kV and has been operated stably at 500 kV. No discharge caused by the gun itself was observed at 500 kVonce the high threshold voltage for stable operation exceeded 500 kV. A dark current of a few picoamperes was generated at 500 kV from a photocathode puck with a semiconducting wafer, while no dark current was observed without a semiconducting wafer. Stable generation of a 500 keV beam with current greater than 0.8 mA was demonstrated for more than two hours.

We demonstrated the generation of a 500-keV electron beam from a high dc voltage photoemission gun for an energy recovery linac light source [N. Nishimori et al., Appl. Phys. Lett. 102, 234103 (2013)]. This demonstration was achieved by addressing two discharge problems that lead to vacuum breakdown in the dc gun. One is field emission generated from a central stem electrode. We employed a segmented insulator to protect the ceramic insulator surface from the field emission. The other is microdischarge at an anode electrode or a vacuum chamber, which is triggered by microparticle transfer or field emission from a cathode electrode. An experimental investigation revealed that a larger acceleration gap, optimized mainly to reduce the surface electric field of the anode electrode, suppresses the microdischarge events that accompany gas desorption. It was also found that nonevaporable getter pumps placed around the acceleration gap greatly help to suppress those microdischarge events. The applied voltage as a function of the total gas desorption is shown to be a good measure for finding the optimum dc gun configuration.