Search

The thermodynamic properties of boron nitride under extreme pressures and temperatures are of great interest and importance for materials science and inertial confinement fusion physics, but they are poorly understood owing to the challenges of performing experiments and realizing ab initio calculations. Here, we report the first shock Hugoniot data on hexagonal boron nitride at pressures of 5–16 Mbar, using hohlraum-driven shock waves at the SGIII-p laser facility in China. Our density functional theory molecular dynamics calculations closely match experimental data, validating the equations of state for modeling the shock response of boron nitride and filling a crucial gap in the knowledge of boron nitride properties in the region of multi-Mbar pressures and eV temperatures. The results presented here provide fundamental insights into boron nitride under the extreme conditions relevant to inertial confinement fusion, hydrogen–boron fusion, and high-energy-density physics. [ABSTRACT FROM AUTHOR]

We present measurements of the 2p-3d transition opacity of a hot molybdenum–scandium sample with nearly half-vacant molybdenum M-shell configurations. A plastic-tamped molybdenum–scandium foil sample is radiatively heated to high temperature in a compact D-shaped gold Hohlraum driven by ∼30 kJ laser energy at the SG-100 kJ laser facility. X rays transmitted through the molybdenum and scandium plasmas are diffracted by crystals and finally recorded by image plates. The electron temperatures in the sample in particular spatial and temporal zones are determined by the K-shell absorption of the scandium plasma. A combination of the IRAD3D view factor code and the MULTI hydrodynamic code is used to simulate the spatial distribution and temporal behavior of the sample temperature and density. The inferred temperature in the molybdenum plasma reaches a average of 138 ± 11 eV. A detailed configuration-accounting calculation of the n = 2–3 transition absorption of the molybdenum plasma is compared with experimental measurements and quite good agreement is found. The present measurements provide an opportunity to test opacity models for complicated M-shell configurations. [ABSTRACT FROM AUTHOR]

Transmissibility limitation is one of the most important barriers in the use of windows for shock experiments if optical probes are used. In this article, we focus on the widely used window material lithium fluoride (LiF) and investigate its optical response under laser-induced shock-compression conditions. A long-pulse laser is shaped to create a continuous accelerating shock wave propagating through the LiF window in the range of 100–400 GPa. The variation of measured optical transmission with shock pressure shows that the LiF window stays transparent even when the shock stress is higher than 350 GPa and transforms to a total opaque state at about 400 GPa. The present experiment exhibits an obviously higher shock stress for LiF windows to lose transparency compared with previously reported results. The discrepancy in experimental results is considered to be due to the difference in shock thickness for a typical time scale at different experimental platforms. Meanwhile, the possible reasons for the discrepancy between our experimental data and the previous ab initio calculations can be suggested by the effect of thermal relaxation between electrons and ions or the overestimation of the absorption coefficient in theoretical calculations. This finding of higher transmissibility limitation may be of importance to researchers who use LiF as a window material in future shock-compression experiments, especially at the laser platform. [ABSTRACT FROM AUTHOR]

Both direct and indirect drive concepts of inertial confinement fusion rely on targets with cryogenic thermonuclear fuel shells for ignition. Experiments on the Shenguang-III prototype laser facility using laser-driven gas-filled hohlraums show distinct differences between cryogenic (20 K) and warm hohlraums. Although the measured x-ray flux in the photon range from 1.6 to 4.4 keV (Au M-band) is identical between cryogenic and warm hohlraums, the cryogenic hohlraum has a much slower rate of rise and is 20% lower in peak intensity of x-ray flux in the photon range from 0.1 to 4 keV. The reasons for this drive deficit between cryogenic and warm hohlraums are investigated using a similar series of hohlraum experiments. The experiments employ three types of hohlraums to distinguish the effect of a shroud window membrane and condensates. Warm hohlraums with a shroud window membrane replicate the slower rate of rise of radiation flux of cryogenic targets. When the shroud window is present, the measured x-ray flux in the hohlraum shows a drive deficit that decreases with time. However, the measured deficit increases as the viewing angle increases. All of these results indicate that the portion of the shroud not illuminated by the lasers absorbs the outgoing x-ray flux from the hohlraum. [ABSTRACT FROM AUTHOR]

A practical experimental method is proposed to investigate thermal transport by characterizing the motion of plasma flows through a x-ray spectroscopic technique using tracers. By simultaneously measuring multiple parameters, namely, the mass-ablation rate, the temporal evolution of plasma flow velocities and trajectories and the temperature, it is possible to observe a variety of physical processes, such as shock wave compression, heating by thermal waves, and plasma thermal expansion, and to determine their relative importance in different phases during the irradiation of CH and Au targets. From a comparison with hydrodynamic simulations, we find significant differences in the motion of the plasma flows between CH and Au, which can be attributed to different sensitivities to the thermal transport process. There are also differences in the ablation and electron temperature histories of the two materials. These results confirm that velocities and trajectories of plasma motion can provide useful evidence in the investigation of thermal conduction, and the approach presented here deserves more attention in the context of inertial confinement fusion and high-energy-density physics. [ABSTRACT FROM AUTHOR]

In implosion experiments, bremsstrahlung radiation ratios of broad-energy-band x-ray emission intensities (sampled by Ross pair) and narrow-energy-band x-ray emission intensities (sampled by multilayer) are typically used to extract the hotspot electron temperature. The latter method could potentially be more accurate because it does not require any additional theoretical arithmetic. However, the boundary conditions of the energy band, drastic influence on the measured electron temperature resulting from response differences of recording devices in the energy band, evident impact from uncertainties of the detector aiming, and coordinate interrelations for the two narrow-energy-band x-ray images have not been explored. These problems should be overcome to obtain the accurate hotspot electron temperature using the narrow-energy-band x-ray emission intensities method. This study solves the problems indicated above by exploring a diagnosis technique to extract the accurate hotspot electron temperature. In particular, we determine that the effect of the response differences and uncertainties could be ignored when the width of the sampled narrow energy band is approximately ±0.5 keV in the linear spectrum response regions of the imaging plate, and the reflectivity of the multilayer is uniform and constant in that energy band and the viewing field of the detector (≥±110 µm). This study is the first to consider the linear spectrum response of the imaging plate in different energy regions, eliminating the effect of the response differences. Finally, the maximal emission intensities in the two recorded-energy-band x-ray images can be used for coordinate interrelation. [ABSTRACT FROM AUTHOR]

Experiments exploring the propagation of heat waves within cylindrical CH foams were performed on the Shenguang-III prototype laser facility in 2012. In this paper, the radiation fluxes out of CH foam cylinders at different angles are analyzed theoretically using the two-dimensional radiation hydrodynamics code LARED-R. Owing to the difficulty in validating opacity and equation of state (EOS) data for high-Z plasmas, and to uncertainties in the measured radiation temperature Tr and the original foam density ρ0, multipliers are introduced to adjust the Au material parameters, Tr, and ρ0 in our simulations to better explain the measurements. The dependences of the peak radiation flux Fmax and the breakout time of the heat wave thalf (defined as the time corresponding to the radiation flux at half-maximum) on the radiation source, opacity, EOS, and ρ0 scaling factors (ηsrc, ηop, ηeos, and ηρ) are investigated via numerical simulations combined with fitting. Then, with the uncertainties in the measured Tr and ρ0 fixed at 3.6% and 3.1%, respectively, experimental data are exploited as fiducial values to determine the ranges of ηop and ηeos. It is found that the ranges of ηop and ηeos fixed by this experiment overlap partially with those found in our previous work [Meng et al., Phys. Plasmas 20, 092704 (2013)]. Based on the scaled opacity and EOS parameters, the values of Fmax and thalf obtained via simulations are in good agreement with the measurements, with maximum errors ∼9.5% and within 100 ps, respectively. [ABSTRACT FROM AUTHOR]

To achieve ignition with high gain in inertial confinement fusion, precise symmetry control is one of the key issues to guarantee the PdV work converting into the inner energy efficiently and maximize the pressure of the hot spot. The shaped pulse is used to maintain a low adiabat of the shell. A longer pulse and more compressible shell require more rigorous symmetry control, especially the driven symmetry during the picket pulse and main pulse. A surrogate capsule with high Z materials is usually used for the early-time symmetry tuning. The passive diagnosis of the re-emission spheres gives the time-resolved measurement of the first 2 ns, and the precision is mainly affected by the weak signals due to the low radiation temperature of the hohlraum. To compare with the re-emission technique with high Z surrogate capsule, we demonstrated the early-time symmetry tuning for picket pulse by using thin-shell capsule radiography technique. Combined with 1D hydrodynamics simulation and backlit imaging simulation, the driven asymmetry was quantified. A view factor assessment was also carried out by IRAD3D and coincided with the experimental consequences. [ABSTRACT FROM AUTHOR]

The x-ray emissivity of gadolinium (Gd) and gold (Au) has been studied using the FLYCHK code. The results show that the Gd M-band is lower than 2 keV and that Gd has a higher x-ray emissivity at low temperature. Thus, we proposed a Gd + Au + Gd sandwich design to improve the x-ray conversion efficiency (CE). Under a laser intensity of 1 × 1015 W/cm2, a 11%–17% enhancement of the CE and an optimized x-ray spectrum were achieved in one-dimensional simulation. The enhancement of the CE is mainly due to an enhancement of the soft x-ray flux (0 keV–2 keV). In addition, the high energy x-ray flux (2 keV–5 keV) is lower than that of Au. Particularly at an early stage, the laser ablates the Gd layer, and the temperature of the Au layer is insufficient for producing an M-band emission. Thus, the high energy x-ray flux is rather low. A sandwich design not only takes advantage of the higher x-ray emissivity of Gd under specific conditions in an efficient manner but also simplifies the target fabrication, which is important. In addition, Gd can also be used to optimize the future design of depleted uranium Hohlraum. [ABSTRACT FROM AUTHOR]

Enhancement of x-ray sources from laser-produced plasmas is significant in wide-ranging applications. Solid and foam TiO2 targets were both used to generate bright x-ray sources at the Shenguang-III prototype laser facility, with a total laser power of 3.2 TW. The new foam targets were with an ultra-low initial density of 8.1 mg/cm3 and a high Ti fraction of 33 sat. %. By absolute measurements, the multi-keV x rays of the 4 keV–7 keV band and 1.6 keV–4.4 keV band and the total x rays above 0.1 keV of the foam target have simultaneously shown conversion enhancements of 1.4, 3.1, and 2.3 times, respectively, compared with the solid target. A much larger emission volume and an average electron temperature of 3.2 keV by moving the foci of laser beams inner were obtained for the foam target, providing a good condition for multi-keV x-ray production. [ABSTRACT FROM AUTHOR]

A 100 kJ-level laser facility has been designed to study inertial confinement fusion physics in China. This facility incorporates various diagnostic techniques, including optical, x-ray imaging, x-ray spectrum, and fusion product diagnostics, as well as general diagnostics assistance systems and central control and data acquisition systems. This paper describes recent developments in diagnostics at the facility. [ABSTRACT FROM AUTHOR]

A hohlraum used to create uniform and strongly coupled warm dense matter and its radiation flux study on the SG-III prototype laser facility are described. Time evolution of the radiation temperature from laser entrance hole (LEH) and the incident radiation temperature at the target surface are obtained using flat response X-ray diode detectors. Then, a calculation of the radiation flux evolution for this hohlraum is carried out using a view-factor method, and the calculated results agree well with the experimental data within the error bar. Using the incident radiation at the target surface as a source, the validity to create uniform and strongly coupled warm dense matter by this hohlraum is verified. [ABSTRACT FROM AUTHOR]

M-band flux asymmetry (MFA) may be another critical factor which can lead to low-mode distortion of implosion. We describe an experimental technique employing the x-ray fluorescence signature of material to investigate the MFA onto the capsule. Si was chosen to be the tracer layer since the inducing threshold for the K-shell fluorescence is much higher than soft x-ray but a little lower than M-band x-ray. The fluorescence images were recorded from a surrogate Si-coated ball, and thus, the P2 MFA was deduced from the fluorescence images. [ABSTRACT FROM AUTHOR]

We present non-collective spectrally resolved X-ray scattering measurements from isochorically heated graphite samples. The elastic and inelastic scattering spectra for the titanium He-α x-ray line at 4.75 keV yield characterization of the temperature and ionization state of the samples. It is found that the plasma theories employing a screened Coulomb potential fail to describe the ion structure of warm dense carbon plasmas and only the models accounting for the effects of the electronic configuration show good agreement with the experimental result. This agreement further suggests that the short-lived chemical bonds play an important role in determining the ion structure of warm dense graphite systems with a temperature of several electron volts. [ABSTRACT FROM AUTHOR]

Two neutron time-of-flight (nToF) detectors have been employed to measure the neutron time-of-flight spectrum in different lines-of-sight, i.e., at the equator plane and the south pole, on Shenguang-III (SG-III) laser facility. The contribution of scattered neutrons has been calculated with the Monte Carlo code JMCT for each nToF detector. The results show that the scattered neutron spectrum is dominated by neutrons scattered on materials in the experiment hall, including the vacuum chamber. The shape of the scattered neutron spectrum depends on the view line, which has been observed with nToF detectors located in the experiment hall of the SG-III laser facility. A method based on the convolution of the calculated neutron time-of-flight spectrum and the instrument response function has been developed for the ion temperature determination. The calculated neutron spectra with the contribution of scattered neutrons can fit the measured results. No obvious ion temperature anisotropy has been observed on the SG-III laser facility at present. [ABSTRACT FROM AUTHOR]

The M-band X-ray (1.6–4.4 keV) preheating and shock temperature of aluminum (Al) foil coated on a thick polystyrene (CH) layer is experimentally measured using a streaked optical pyrometer system (SOP) in the SG-III prototype laser facility for the first time. Multi-group hydrodynamic simulation captures the main characteristics of rear surface emission. Compared with the unpreheated target with bromine (Br) doped, M-band X-rays have a large impact on shock propagation inside the undoped target. Preheating changes target the initial state and generate a broader shock front, resulting in drastic variation in rear surface emission features. By comparing sensitivity analysis in the simulation and experimental uncertainty range, it is found that the SOP measurement could achieve valuable information on the shock transition time and unique emission profile, offering reliable boundary and benchmarks for simulation and analysis. Proper evaluation on the radiation source, including both the flux and the spectrum, and material opacities is essential for data interpretation. This study could promote our understanding and predictive capability required for inertial confinement fusion studies. [ABSTRACT FROM AUTHOR]

An ultraviolet Thomson-scattering system has been designed and implemented on the Shenguang-III laser facility, a 48-beam, 3ω (351 nm), 180 kJ-level laser driver for high energy density physics and inertial confinement fusion researches. The 4ω (263.3 nm) probe beam of the Thomson-scattering system is injected from the north pole (top) of the target chamber, with an assistant beam-pointing monitor to achieve high pointing accuracy. The Thomson-scattered light is collected by a double-Cassegrain optical transmission system, which provides an achromatic image over a wide wavelength range of 200–800 nm. A novel on-line alignment method is developed and applied to the diagnostic system, ensuring a volumetric positioning accuracy of ∼30 μm for the scattering volume. An online calibration is also conducted to provide the wavelength benchmark and the spectral resolution of the system. This Thomson-scattering system has been tested in a complicated experimental environment with gas-filled hohlraums, and a high-quality ion feature of the scattered light has been obtained. [ABSTRACT FROM AUTHOR]

High-space-resolving information of hotspot electron temperature is a foundation for further research on physical processes of implosion in inertial confinement fusion. This work proposed a novel high-space-resolving electron temperature detector, which is based on the bremsstrahlung radiation mechanism of the implosion hotspot and uses two-channel Kirkpatrick–Baez microscopes. In this novel detector, an optical quasi-coaxis method was used to eliminate the strong impact of the view field difference on the high space resolution and correctness of the electron temperature diagnosis, and a compound KB microscope method was proposed to reduce the number of spherical reflectors and save space. [ABSTRACT FROM AUTHOR]

Foam gold was proposed to increase the laser to x-ray conversion efficiency due to its important applications. To understand the mechanism of x-ray enhancement, the detailed energy distributions and plasma profiles for laser-irradiated solid gold and foam gold targets were studied comparatively by hydrodynamic simulations using the code Multi-1D. It is confirmed that the radiation heat wave is subsonic for the normal solid gold target, while supersonic for the foam gold target. The shock wave, which is behind the supersonic radiation heat wave for the foam gold target, generates a plasma temperature gradient with high temperature near the shock wave front to produce an additional net outward radiation for enhancement of the x-ray emission. Much larger inward plasma velocity is also driven by the shock wave as an initial plasma velocity for the laser deposition and electron thermal conduct zone, which decreases the expanding plasma kinetic energy loss and helps to increase the x-ray radiation. [ABSTRACT FROM AUTHOR]

It is an important approach to improve the x-ray conversion efficiency of laser-ablated high-Z plasmas by using low initial density materials for various applications. However, unavoidable low-Z impurities in the manufacture process of low-density high-Z foam targets will depress this effect. A general easy-to-use analytical model based on simulations was developed to evaluate the quantitative impact of impurities within the gold foam target on laser to x-ray conversion efficiency. In addition, the x-ray conversion efficiencies of 1 g/cm3 gold foams with two different initial contents of impurities were experimentally investigated. Good agreements have been achieved between the model results and experiments. [ABSTRACT FROM AUTHOR]

Measurements of iron-plasma absorption spectrum over 150-1200 eV photon energy range were reported at temperature T = (72 ± 4) eV. The electron temperature was diagnosed with the absorption spectrum of aluminum mixed with iron. The density was not diagnosed directly but obtained from a radiative hydrodynamic simulation with the Multi-1D code. The broad photon energy range enables simultaneous observation of the L-shell and M-shell transitions that dominate the radiation transport at this temperature. The spectrally resolved transmission data were compared to the detailed-configuration-accounting model calculations and reasonable agreement was found. [ABSTRACT FROM AUTHOR]

The opacity of a gold plasma at the temperature of 85 eV and density of 0.02 g/cm3 was measured over the energy range from 150 eV to 1200 eV. The gold sample was heated by thermal x-ray radiation generated with a foam-baffled gold cavity. The sample transmission was obtained from the backlight, absorption and self-emission spectra measured by a time-gated, spatially resolved grating spectrometer, with the backlight and absorption spectra being measured simultaneously in a single shot and the self-emission in another shot. The temperature and density of the gold absorber were determined by the hydrodynamic simulation with Multi-1D code, which was partially tested by the reemission radiative flux measurements of the heated sample. This work permits the first test of opacity models over the photon energy range that dominates the Rosseland mean opacity at the temperature of interest for the inertial confinement fusion. [ABSTRACT FROM AUTHOR]

Laser-irradiated Au layer with CH foam coating is investigated numerically. It is found that when coated with under-critical density CH foam more thermal radiation is produced, while less radiation is produced when coated with over-critical density CH foam. The under-critical density CH foam coating, which is heated supersonically and volumetrically by lasers, hampers the expansion of high-Z plasma and helps increase the density and temperature of Au plasma in the radiation zone. It is a practical and simple way to increase the laser x-ray conversion efficiency of hohlraum by coated with low-Z foam of under-critical density. This idea is tested with an experiment in an analogous geometry. The line emission from laser-irradiated Ti layer coated with CH foam was measured, and the increment of x-ray when coated with under-critical density CH foam was found. [ABSTRACT FROM AUTHOR]

Experiments are presented, which demonstrate the properties of x-ray radiation and redistribution of radiant thermal energy in high Z cylindrical cavities filled with low Z CH foam. Time integrated spectra records were obtained by a calibrated space-resolved transmission grating spectrometer. The x-ray radiation became weaker in intensity and was changed to a softer near-Planckian radiation light after a 1500 μm long transport in the foam filling cavity. The experimental redistribution of the radiant thermal energy was plotted and compared to the numerical results of a simplified model. Good agreements have been achieved. [ABSTRACT FROM AUTHOR]

A 1D space resolving x-ray spectrum diagnostic system has been developed to study the radiation opacity of hot plasma on SG-II laser facility. The diagnostic system consists of a 2400 lines/mm flat-field holographic grating and a gated microchannel plate coupled with an optical CCD and covers the wavelength range of 5-50 Å. The holographic grating was compared with a ruled one by measuring the emission spectra from a laser-produced molybdenum plasma. The results indicate that the holographic grating possesses better sensitivity than the ruled grating having nearly similar spectral resolution. The spectrograph has been used in radiative opacity measurement of Fe plasma. Simultaneous measurements of the backlight source and the transmission spectrum in appointed time range in one shot have been accomplished successfully with the holographic grating spectrometer. The 2p-3d transition absorption of Fe plasma near 15.5Å in has been observed clearly. [ABSTRACT FROM AUTHOR]

Reducing hohlraum wall loss is one of the most important ways to improve hohlraum coupling efficiency in laser indirect drive inertial-confinement fusion. It is appeared that a high Z metallic foam as hohlraum wall material will reduce wall loss. By adjusting initial hohlraum wall density distribution along radial axes to ρ0(r)=kr, the numerical simulation results show that it can indeed bring best savings of ∼40% general wall loss. We conclude that absorbed energy mainly decreases by restraining rarefactions, and a proper slope k can optimize internal energy loss of low density and increased kinetic loss by subsonic. Also saved energy ratio reduces with source temperature decreasing. This approach would cut the reactor driver that needs quite substantially if experiments demonstrate it. [ABSTRACT FROM AUTHOR]

A technique that combines the diagnostics of electron temperature history and the measurements of ablation velocity with two-tracer x-ray spectroscopy has been developed for diagnosing the temperature profiles in the thermal conduction layers of laser-ablated plastic foils. The electron temperature in the plastic ablator was diagnosed using the isoelectronic line ratios of Al Lyα line to Mg Lyα line, emitted from a tracer layer of Al/Mg mixture buried under the ablator. The ablation velocity was inferred from the time delay between the onset time of x-ray line emissions from Al and Mg tracer layers buried at two depths in the ablator, respectively. From the measured electron temperatures and ablation velocity, the electron temperature profile in the conduction layer was inferred. The measured temperature profile was compared with the simulated one and reasonable agreement was found. [ABSTRACT FROM AUTHOR]

Simultaneous measurements of the self-emission spectrum, the backlighting source spectrum, and the transmission spectrum in one shot, which reduce the experimental uncertainties from shot-to-shot fluctuation, are essential for precise opacity experiments. In order to achieve precise absorption spectrum of Al plasmas, a special half sample sandwich target was designed and short backlighter was used to provide time- and space-resolving diagnostics on the Shenguang II high power laser facility. In the measurement, a cylindrical cavity with CH foam baffles was used to provide a clean x-ray radiation environment for sample heating. The x-ray source spectrum, the transmission spectrum, and the self-emission spectrum of the soft x-ray heated Al sample were recorded in one shot with a penta-erythritol tetrakis (hydroxymethy) methane C(CH2OH)4 (PET) crystal spectrometer by using the point-projection method. Experimental results have been compared with the calculation results of a detailed level accounting opacity code. [ABSTRACT FROM AUTHOR]

The K-shell x-ray spectra from the aluminum plasmas generated by the interaction of the 120 TW, 30 fs laser with aluminum targets have been measured by defocusing the laser beam. Laser energy-normalized intensity of the He-a line increases with the laser intensity approximately as a power law [variant_greek_epsilon]∝ILγ with the much smaller exponent of γ=0.062 compared to γ=0.2∼0.5 in the previous experiments, which is caused by the stronger radial thermal diffusivity in the target for the smaller laser spot. Laser-to-He-a line conversion efficiency of up to 1.9×10-3 and as high as about 3×1013 photons/2π Sr aluminum He-a line x-ray source have been achieved for a single shot due to the preplasma effect and relatively large laser spot and energy for the single shot. The x-ray spectra as a function of the laser intensity are also analyzed to get the electron temperature and density. [ABSTRACT FROM AUTHOR]

Low-Z plasmas have been produced by x-ray radiative heating of a low-Z sample on the “Xingguang II” laser facility. High-resolution transmission spectra of the low-Z plasma (CHO) have been measured by using a flat field grating spectrometer. Absorption lines of oxygen and carbon ions in the region from 1.6 nm to 5.0 nm have been observed clearly and identified. The unresolved transition array model (UTA) has been introduced to calculate the transmission spectra of the CHO plasma. The measured transmission spectra have been compared with the calculated ones and the results of other works. © 2002 American Institute of Physics. [ABSTRACT FROM AUTHOR]

The opacity of a molybdenum plasma in local thermodynamic equilibrium with open M-shell configurations was measured in the energy range from 200 eV to 800 eV, corresponding to the Δn = 1 M to N shell and Δn = 2 M to O shell transitions. The sample was heated by thermal x-ray radiation generated with a gold cavity. The electron temperature was diagnosed with the absorption spectrum of doped aluminum, giving a value of Te = (67 ± 4) eV. The density was 9.7 mg/cm3, which was deduced from the known initial area density and the plasma thickness by radiographic measurements of the expansion of the heated foil sample. The spectrally resolved transmission data were compared to a detailed-configuration-accounting model calculation and about 20% to 100% discrepancies were found. [ABSTRACT FROM AUTHOR]

Laser target energy coupling mechanism is crucial in the shock ignition (SI) scheme, and x-ray radiation energy is a non-negligible portion of the laser produced plasma energy. To evaluate the x-ray radiation energy amount at conditions relevant to SI scheme, instantaneous x-ray radiation energy is investigated experimentally with continuum phase plates smoothed lasers irradiating layer polystyrene targets. Comparative laser pulses without and with shock spike are employed. With the measured x-ray angular distribution, full space x-ray radiation energy and conversion efficiency are observed. Instantaneous scaling law of x-ray conversion efficiency is obtained as a function of laser intensity and time. It should be pointed out that the scaling law is available for any laser pulse shape and intensity, with which irradiates polystyrene planar target with intensity from 2 × 1014 to 1.8 × 1015 W/cm2. Numerical analysis of the laser energy transformation is performed, and the simulation results agree with the experimental data. [ABSTRACT FROM AUTHOR]

Accurate opacity and equation of state (EOS) data are important parameters for reliable modeling and understanding many phenomena of high energy density physics. However, they are difficult to obtain either theoretically or experimentally especially for high-Z plasmas. In this paper, we proposed a simple method to verify the opacity and EOS of high-Z plasmas in rarefactive states, which is build on the two key aspects of ablation processes, i.e., the propagation of heatwave into materials and the hydrodynamic expansion of the blow-off plasmas. Based on the integrated analysis of the Au foil burnthrough and foam-confined plasma expansion experiments performed on the Shenguang II and Shenguang III prototype laser facilities, we suggested two semi-empirical multipliers to adjust the opacity and EOS of Au plasma. These adjusted opacity and EOS may then provide a foundation for other radiation hydrodynamic simulations under similar drive conditions. [ABSTRACT FROM AUTHOR]

X-ray emission from laser-plasma interaction is an important x-ray source, and improving laser to x-ray conversion is imperative for various applications. The laser to x-ray conversion efficiency (CE) was simulated for gold targets with different initial densities. Using a 0.1 g/cm3 Au layer target, an x-ray conversion efficiency of 50.8% was obtained, which was 1.34 times of the 37.9% for the solid density target. It has been shown that the enhancement of the x-ray conversion efficiency is caused by the increase of absorption from the incident laser and reduction of ion kinetic energy due to the initial low density of the gold target. [ABSTRACT FROM AUTHOR]

An eight-channel x-ray flat crystal spectrometer was developed for high energy density physics research at the Shenguang-III (SG-III) laser facility. The spectrometer uses trihydroxymethylaminomethane crystals (2 d = 8.78 Å) to record Ti K-shell emission in the photon energy range of 4.65-5.05 keV. The spectrometer couples to an x-ray framing camera to achieve time-resolution. This has four microstrips, and each strip records two snapshots of the emission image. Based on the intersection positioning system with a dual-charge coupled device, the alignment system is easily operated and efficient. The instrument was tested and used for Au hohlraum plasma diagnosis experiments on SG-III. The He- α line and its Li-like satellites and the Ly- α line of a Ti tracer were detected, from which the spectral resolution of the instrument was analyzed. The spectral resolution E /Δ E at the Ti He- α line ranges from about 500 to 880 and mainly limited by the x-ray source size.

We present an experimental determination of the response of a gated flat-field spectrometer at the Shenguang-II laser facility. X-rays were emitted from a target that was heated by laser beams and then were divided into different intensities with a step aluminum filter and collected by a spectrometer. The transmission of the filter was calibrated using the Beijing Synchrotron Radiation Facility. The response characteristics of the spectrometer were determined by comparing the counts recorded by the spectrometer with the relative intensities of the x-rays transmitted through the step aluminum filter. The response characteristics were used to correct the transmission from two shots of an opacity experiment using the same samples. The transmissions from the two shots are consistent with corrections, but discrepant without corrections.

A novel flat-response x-ray detector has been developed for the measurement of radiation flux from a hohlraum. In order to obtain a flat response in the photon energy range of 0.1-4 keV, it is found that both the cathode and the filter of the detector can be made of gold. A further improvement on the compound filter can then largely relax the requirement of the calibration x-ray beam. The calibration of the detector, which is carried out on Beijing Synchrotron Radiation Facility at Institute of High Energy Physics, shows that the detector has a desired flat response in the photon energy range of 0.1-4 keV, with a response flatness smaller than 13%. The detector has been successfully applied in the hohlraum experiment on Shenguang-III prototype laser facility. The radiation temperatures inferred from the detector agree well with those from the diagnostic instrument Dante installed at the same azimuth angle from the hohlraum axis, demonstrating the feasibility of the detector.