Search

The on-demand jetting of high-viscosity liquid has significant applications in fields such as electronic packaging and bioprinting. Conventional methods for high-viscosity liquid jetting often employ a needle propelling the liquid rapidly, which demands high precision in the manufacturing and assembly of the needle and nozzle, and can potentially damage biomaterials. In this study, a novel method utilizing jet tube impact for on-demand high-viscosity liquid jetting is proposed, leveraging the inherent inertia of the liquid to generate the pressure pulse necessary for on-demand jetting. This method reduces the precision requirements for the device, enables device simplification, and avoids harm to biomaterials. The feasibility of this approach for on-demand high-viscosity liquid jetting is validated through experiments, and by combining numerical simulations, the jetting mechanism is revealed and primary factors influencing jetting performance are investigated. It is found that the water hammer pressure wave induced by the liquid inertia during the sudden velocity change of the jet tube is the predominant driving force for jetting, and the peak pressure can exceed 1 MPa and the peak jet velocity can exceed 15 m/s. An increase in the jet tube impact velocity and an extension of the acceleration duration at the same impact velocity both lead to an increase in the pressure wave amplitude. In addition, a decrease in the liquid level height shortens the period of the pressure wave. These factors all have an influence on the jetting performance. This study provides a new insight and theoretical foundation for the on-demand high-viscosity liquid jetting. [ABSTRACT FROM AUTHOR]

In recent years, gallium-based liquid metal has emerged as a prominent research material in the realm of flexible electronics, owing to its exceptional electrical conductivity and deformability. The crux of developing flexible electronic devices using liquid metal as a conductive material lies in the patterning of the liquid metal. Inkjet printing technology possesses the capability to efficiently craft functional patterns by printing any inkable material. However, due to the facile oxidation of the gallium-based liquid metal surface in ambient air, leading to the formation of oxide films and the presence of high surface tension, conventional inkjet printing techniques are incapable of directly rendering liquid metal prints. This manuscript introduces a refined and remarkably efficient approach to inkjet printing utilizing the liquid metal. By deftly adjusting the interfacial tension of the liquid metal at the nozzle with ultra-low potentials, falling within the 2-V range, the achievement of on-demand, micron-scale liquid metal microdroplet ejection printing surpassing 3 kHz is brought to fruition. This article delves into unraveling the mechanisms of potential modulation on the interfacial tension of the liquid metal at the nozzle, as well as the fundamental theories pertaining to the formation and migration of liquid metal microdroplets. These insights establish a theoretical and technical foundation for the application of liquid metals in the field of electronic printing. [ABSTRACT FROM AUTHOR]