Search

The impact of the fluorine-based reactive ion etch (RIE) process on the structural, electrical, and magnetic properties of NiFe and CoNiFe-plated materials was investigated. Several techniques, including X-ray fluorescence, 4-point-probe, BH looper, transmission electron microscopy (TEM), and electron energy loss spectroscopy (EELS), were utilized to characterize both bulk film properties such as thickness, average composition, Rs, q, Bs, Ms, and surface magnetic "dead" layers' properties such as thickness and element concentration. Experimental data showed that the majority of Rs and Bs changes of these bulk films were due to thickness reduction during exposure to the RIE process. q and Ms change after taking thickness reduction into account were negligible. The composition of the bulk films, which were not sensitive to surface magnetic dead layers with nano-meter scale, showed minimum change as well. It was found by TEM and EELS analysis that although both before and after RIE there were magnetic dead layers on the top surface of these materials, the thickness and element concentration of the layers were quite different. Prior to RIE, dead layer was actually native oxidation layers (about 2 nm thick), while after RIE dead layer consisted of two sub-layers that were about 6 nm thick in total. Sub-layer on the top was native oxidation layer, while the bottom layer was RIE "damaged" layer with very high fluorine concentration. Two in-situ RIE approaches were also proposed and tested to remove such damaged sub-layers. [ABSTRACT FROM AUTHOR]

An ultrafast and low-power all-optical tunable metamaterial-induced transparency is realized, using polycrystalline barium titanate doped gold nanoparticles and multilayer tungsten disulfide microsheets as nonlinear optical materials. Large nonlinearity enhancement is obtained associated with quantum confinement effect, local-field effect, and reinforced interaction between light and multilayer tungsten disulfide. Low threshold pump intensity of 20 MW/cm² is achieved. An ultrafast response time of 85 ps is maintained because of fast carrier relaxation dynamics in nanoscale crystal grains of polycrystalline barium titanate. This may be useful for the study of integrated photonic devices based on two-dimensional materials. [ABSTRACT FROM AUTHOR]

Nanoscale multichannel filter is realized in plasmonic circuits directly, which consists of four plasmonic nanocavities coupled via a plasmonic waveguide etched in a gold film. The feature device size is only 1.35 μm, which is reduced by five orders of magnitude compared with previous reports. The optical channels are formed by transparency windows of plasmon-induced transparencies. A shift of 45 nm in the central wavelengths of optical channels is obtained when the plasmonic coupled-nanocavities are covered with a 100-nm-thick poly(methyl methacrylate) layer. This work opens up the possibility for the realization of solid quantum chips based on plasmonic circuits. [ABSTRACT FROM AUTHOR]

The phase stability and mechanical properties of binary W1-xTax and W1-xRex alloys were investigated using the full-potential augmented plane-wave method. The special quasirandom structures(SQSs) of these alloys aremechanically stable due to all of the positive elastic constants and negative binding energies. The binding energies of both the W1-xTax and W1-xRex alloys also exhibit energy favorable asymmetry toward the W-rich side. In addition, the bulk modulus of the W1-xTax alloys decrease gradually with the increase of the Ta concentration, while those of the W1-xRex alloys increase gradually with the increase of the Re concentration. Consequently, the bulk modulus of W metal can be improved by doping with Re, implying that the resistance to deformation is enhanced. Based on the mechanical characteristic G/B and Poisson's ratio v, both the W1-xTax andW1-xRex alloys are regarded as being ductile materials, the ductility of which improves with the increase of Ta or Re. [ABSTRACT FROM AUTHOR]