Search

There is a growing interest in BiFeO3-based alloys because of the possibility it offers for developing high-temperature high-performance piezoelectric materials and for their interesting multiferroic properties. Often such ceramics are synthesized with additives either to reduce/suppress leakage current that the system inherits from the parent compound BiFeO3 or to promote sintering via formation of the liquid phase. We demonstrate here the propensity for stabilizing ferromagnetism in the ferroelectric solid solution BiFeO3–PbTiO3 (BF–PT) when synthesized with additive MnO2. Detailed investigation revealed that the ferromagnetic property of the ceramic is extrinsic and caused by the additive enabled precipitation of trace amount of the ferrimagnetic Pb-hexaferrite phase, not easily detected in conventional x-ray diffraction measurements. We also show that the ferromagnetic property is induced in Co-modified BF–PT. However, in this case, the additive stabilizes the CoFe2O4 spinel ferrite phase. While our findings offer a strategy to develop particulate magnetoelectric multiferroic composites using additive assisted precipitation of the ferrimagnetic phase(s) in BiFeO3-based ferroelectric alloys, it also helps in better understanding of the electromechanical response in BFO-based alloys. [ABSTRACT FROM AUTHOR]

One of the important requirements for piezoelectric materials for use as high strain actuators is that they exhibit large unipolar electrostrain with minimum hysteresis. While large unipolar electrostrain >1% is generally achievable in good quality single crystals, most polycrystalline piezoelectric show low values < 0.4%. Unipolar electrostrain 0.5%–0.7% in polycrystalline piezoelectrics has often been reported in Na0.5Bi0.5TiO3-based compositions at the non-ergodic ergodic boundary. Not amenable to poling, such materials exhibit almost nearly zero direct piezoelectric coefficient (d33 ∼ 0 pC/N) and cannot be simultaneously used as a sensor. In this paper, we report a combination of large unipolar electrostrain of ∼0.6% with small strain hysteresis of 25% in a Sn-modified relaxor ferroelectric system PbTiO3–Bi(Ni1/2Zr1/2)O3. It exhibits d33 ∼ 340 pC/N, which is stable up to 130 °C, and large signal converse piezoelectric coefficient d33* ∼ 1200 pm/V. A combination of large d33 and d33* in the same material makes it an important candidate for simultaneous use as a sensor and high strain actuators. X-ray diffraction study in situ with the electric field suggests that large electrostrain with low strain hysteresis in this system is because of the increased reversible switching of the field stabilized tetragonal ferroelastic domains. [ABSTRACT FROM AUTHOR]

We report here the synthesis of a self-grown 0–3 particulate multiferroic composite by controlled precipitation of the ferrimagnetic garnet phase using additive (MnO2) assisted sintering of a multi-cation ferroelectric system (Bi, Pb, Dy)(Fe, Ti)O3. The particulate multiferroic composite derived in this manner exhibits a favorable microstructure, wherein, although the volume fraction of the garnet phase is kept low (6%), which helps in retaining the electrical insulating character of the specimen, the number fraction of the garnet grains vis-à-vis the ferroelectric grains is ∼1:1. The composite shows a nearly ∼50% increase in saturation polarization at room temperature under a modest magnetic field of 1 T, suggesting a considerable improvement in ferroelectric domain switching due to the efficient strain transfer from the minority garnet grains to the majority piezoelectric grains. [ABSTRACT FROM AUTHOR]