Search

The ν2 and ν5 fundamental bands of thionyl chloride (SOCl2) were measured in the 420 cm-1-550 cm-1 region using the FT-far-IR spectrometer exploiting synchrotron radiation on the AILES beamline at SOLEIL. A straightforward line-by-line analysis is complicated by the high congestion of the spectrum due to both the high density of SOCl2 rovibrational bands and the presence of the ν2 fundamental band of sulfur dioxide produced by hydrolysis of SOCl2 with residual water. To overcome this difficulty, our assignment procedure for the main isotopologues 32S16O35Cl2 and 32S16O35Cl37Cl alternates between a direct fit of the spectrum, via a global optimization technique, and a traditional line-by-line analysis. The global optimization, based on an evolutionary algorithm, produces rotational constants and band centers that serve as useful starting values for the subsequent spectroscopic analysis. This work helped to identify the pure rotational submillimeter spectrum of 32S16O35Cl2 in the v2 = 1 and v5 = 1 vibrational states of Martin-Drumel et al. [J. Chem. Phys. 144, 084305 (2016)]. As a by-product, the rotational transitions of the v4 = 1 far-IR inactive state were identified in the submillimeter spectrum. A global fit gathering all the microwave, submillimeter, and far-IR data of thionyl chloride has been performed, showing that no major perturbation of rovibrational energy levels occurs for the main isotopologue of the molecule. [ABSTRACT FROM AUTHOR]

A systematic search for carbon-chain cumulenones beyond H2C4O has been undertaken using microwave spectral taxonomy in combination with a pulsed jet discharge source. No evidence was found for the C2V isomer of H2C5O or its longer derivatives, but HC(O)C4H, the longer variant of propynal, HC(O)CCH, was identified instead. Its rotational and leading centrifugal distortion constants have been derived to high accuracy from detection of both a- and b-type lines; those below 40 GHz were measured using a Fabry-Perot cavity, while lines between 40 and 72 GHz were recorded by double resonance techniques. Overwhelming evidence for the identification is provided by detection of HC(O)C4D, DC(O)C4H, and HC(18O)C4H at the expected frequencies using isotopically enriched samples. Because HC(18O)C4H is produced with comparable abundance when using either 18O2 or C18O as the source of oxygen, and because H13C(O)C4H is not preferentially formed when starting from 13CO, atomic oxygen appears to be a key reactant in formation, plausibly viaOinsertion, e.g., H2CC2n+2H + O → HC(O)C2n+2H + H. Under the same experimental conditions, HC(O)CCH is more than 10 times more abundant than H2C3O, regardless of the source of oxygen, and no evidence is found for cyclopropenone, c-C3H2O. Taken together, these observations indicate that propynal and longer chains with an odd number of carbon atoms are either energetically more stable than cumulenones of the same size, are kinetically favored products, or both. On the basis of the HC(O)C4H discovery, searches for the isovalent sulfur species, HC(S)C4H, and HC(O)C6H have been conducted. Guided by new quantum chemical calculations, the rotational spectra of both were observed in the centimeter-wave band with the same spectrometer. [ABSTRACT FROM AUTHOR]

Owing to its unparalleled structural specificity, rotational spectroscopy is a powerful technique to unambiguously identify and characterize volatile, polar molecules. We present here a new experimental approach, automated microwave double resonance (AMDOR) spectroscopy, to rapidly determine the rotational constants of these compounds without a priori knowledge of elemental composition or molecular structure. This task is achieved by rapidly acquiring the classical (frequency vs. intensity) broadband spectrum of a molecule using chirped-pulse Fourier transform microwave (FTMW) spectroscopy and subsequently analyzing it in near real-time using complementary cavity FTMW detection and double resonance. AMDOR measurements provide a unique "barcode" for each compound from which rotational constants can be extracted. To illustrate the power of this approach, AMDOR spectra of three aroma compounds - trans-cinnamaldehyde, α-, and β-ionone - have been recorded and analyzed. The prospects to extend this approach to mixture characterization and purity assessment are described. [ABSTRACT FROM AUTHOR]

HOCO is an important intermediate in combustion and atmospheric processes because the OH + CO → H + CO2 reaction represents the final step for the production of CO2 in hydrocarbon oxidation, and theoretical studies predict that this reaction proceeds via various intermediates, the most important being this radical. Isotopic investigations of trans- and cis-HOCO have been undertaken using Fourier transform microwave spectroscopy and millimeter-wave double resonance techniques in combination with a supersonic molecular beam discharge source to better understand the formation, chemical bonding, and molecular structures of this radical pair. We find that trans- HOCO can be produced almost equally well from either OH + CO or H + CO2 in our discharge source, but cis-HOCO appears to be roughly two times more abundant when starting from H + CO2. Using isotopically labelled precursors, the OH + C18O reaction predominately yields HOC18O for both isomers, but H18OCO is observed as well, typically at the level of 10%-20% that of HOC18O; the opposite propensity is found for the 18OH + CO reaction. DO + C18O yields similar ratios between DOC18O and D18OCO as those found for OH + C18O, suggesting that some fraction of HOCO (or DOCO) may be formed from the back-reaction H + CO2, which, at the high pressure of our gas expansion, can readily occur. The large 13C Fermi-contact term (aF) for trans- and cis-HO13CO implicates significant unpaired electronic density in a σ-type orbital at the carbon atom, in good agreement with theoretical predictions. By correcting the experimental rotational constants for zero-point vibration motion calculated theoretically using second-order vibrational perturbation theory, precise geometrical structures have been derived for both isomers. [ABSTRACT FROM AUTHOR]

Complete and reliable knowledge of the ammonia spectrum is needed to enable the analysis and interpretation of astrophysical and planetary observations. Ammonia has been observed in the interstellar medium up to J=18 and more highly excited transitions are expected to appear in hot exoplanets and brown dwarfs. As a result, there is considerable interest in observing and assigning the high J (rovibrational) spectrum. In this work, numerous spectroscopic techniques were employed to study its high J transitions in the ground and ν2=1 states. Measurements were carried out using a frequency multiplied submillimeter spectrometer at Jet Propulsion Laboratory (JPL), a tunable far-infrared spectrometer at University of Toyama, and a high-resolution Bruker IFS 125 Fourier transform spectrometer (FTS) at Synchrotron SOLEIL. Highly excited ammonia was created with a radiofrequency discharge and a dc discharge, which allowed assignments of transitions with J up to 35. One hundred and seventy seven ground state and ν2=1 inversion transitions were observed with microwave accuracy in the 0.3-4.7 THz region. Of these, 125 were observed for the first time, including 26 ΔK=3 transitions. Over 2000 far-infrared transitions were assigned to the ground state and ν2=1 inversion bands as well as the ν2 fundamental band. Of these, 1912 were assigned using the FTS data for the first time, including 222 ΔK=3 transitions. The accuracy of these measurements has been estimated to be 0.0003-0.0006 cm-1. A reduced root mean square error of 0.9 was obtained for a global fit of the ground and ν2=1 states, which includes the lines assigned in this work and all previously available microwave, terahertz, far-infrared, and mid-infrared data. The new measurements and predictions reported here will support the analyses of astronomical observations by high-resolution spectroscopy telescopes such as Herschel, SOFIA, and ALMA. The comprehensive experimental rovibrational energy levels reported here will permit further refinement of the potential energy surface to improve ammonia ab initio calculations and facilitate assignment of new high-resolution spectra of hot ammonia. [ABSTRACT FROM AUTHOR]

The ν 2 and ν 5 fundamental bands of thionyl chloride (SOCl 2 ) were measured in the 420 cm -1 -550 cm -1 region using the FT-far-IR spectrometer exploiting synchrotron radiation on the AILES beamline at SOLEIL. A straightforward line-by-line analysis is complicated by the high congestion of the spectrum due to both the high density of SOCl 2 rovibrational bands and the presence of the ν 2 fundamental band of sulfur dioxide produced by hydrolysis of SOCl 2 with residual water. To overcome this difficulty, our assignment procedure for the main isotopologues 32 S 16 O 35 Cl 2 and 32 S 16 O 35 Cl 37 Cl alternates between a direct fit of the spectrum, via a global optimization technique, and a traditional line-by-line analysis. The global optimization, based on an evolutionary algorithm, produces rotational constants and band centers that serve as useful starting values for the subsequent spectroscopic analysis. This work helped to identify the pure rotational submillimeter spectrum of 32 S 16 O 35 Cl 2 in the v 2 =1 and v 5 =1 vibrational states of Martin-Drumel et al. [J. Chem. Phys. 144, 084305 (2016)]. As a by-product, the rotational transitions of the v 4 =1 far-IR inactive state were identified in the submillimeter spectrum. A global fit gathering all the microwave, submillimeter, and far-IR data of thionyl chloride has been performed, showing that no major perturbation of rovibrational energy levels occurs for the main isotopologue of the molecule.

Because of its structural specificity, rotational spectroscopy has great potential as an analytical tool for characterizing the chemical composition of complex gas mixtures. However, disentangling the individual molecular constituents of a rotational spectrum, especially if many of the lines are entirely new or unknown, remains challenging. In this paper, we describe an empirical approach that combines the complementary strengths of two techniques, broadband chirped-pulse Fourier transform microwave spectroscopy and narrowband cavity Fourier transform microwave spectroscopy, to characterize and assign lines. This procedure, called microwave spectral taxonomy, involves acquiring a broadband rotational spectrum of a rich mixture, categorizing individual lines based on their relative intensities under series of assays, and finally, linking rotational transitions of individual chemical compounds within each category using double resonance techniques. The power of this procedure is demonstrated for two test cases: a stable molecule with a rich spectrum, 3,4-difluorobenzaldehyde, and products formed in an electrical discharge through a dilute mixture of C2H2 and CS2, in which spectral taxonomy has enabled the identification of propynethial, HC(S)CCH.

Complete and reliable knowledge of the ammonia spectrum is needed to enable the analysis and interpretation of astrophysical and planetary observations. Ammonia has been observed in the interstellar medium up to J=18 and more highly excited transitions are expected to appear in hot exoplanets and brown dwarfs. As a result, there is considerable interest in observing and assigning the high J (rovibrational) spectrum. In this work, numerous spectroscopic techniques were employed to study its high J transitions in the ground and ν(2)=1 states. Measurements were carried out using a frequency multiplied submillimeter spectrometer at Jet Propulsion Laboratory (JPL), a tunable far-infrared spectrometer at University of Toyama, and a high-resolution Bruker IFS 125 Fourier transform spectrometer (FTS) at Synchrotron SOLEIL. Highly excited ammonia was created with a radiofrequency discharge and a dc discharge, which allowed assignments of transitions with J up to 35. One hundred and seventy seven ground state and ν(2)=1 inversion transitions were observed with microwave accuracy in the 0.3-4.7 THz region. Of these, 125 were observed for the first time, including 26 ΔK=3 transitions. Over 2000 far-infrared transitions were assigned to the ground state and ν(2)=1 inversion bands as well as the ν(2) fundamental band. Of these, 1912 were assigned using the FTS data for the first time, including 222 ΔK=3 transitions. The accuracy of these measurements has been estimated to be 0.0003-0.0006 cm(-1). A reduced root mean square error of 0.9 was obtained for a global fit of the ground and ν(2)=1 states, which includes the lines assigned in this work and all previously available microwave, terahertz, far-infrared, and mid-infrared data. The new measurements and predictions reported here will support the analyses of astronomical observations by high-resolution spectroscopy telescopes such as Herschel, SOFIA, and ALMA. The comprehensive experimental rovibrational energy levels reported here will permit further refinement of the potential energy surface to improve ammonia ab initio calculations and facilitate assignment of new high-resolution spectra of hot ammonia.