Search

A solid state terahertz interferometer has been developed on the recent commissioned HL-2M tokamak. It can work in a wide frequency region of 220-325 GHz, and the terahertz wave is generated from a low frequency phase locked voltage controlled oscillator with the frequency multiplying technique. A phase processor based on field programmable gate array (FPGA) technology is designed for the heterodyne interferometer, and it contributes to real-time display of electron density. To extract phase information, a novel numerical algorithm related to fast Fourier transform is written on the FPGA chip and enables one to obtain phase shift without being affected by amplitude variation induced by plasma absorption or frequency modulation from the outer electromagnetic environment. The interferometer achieves minimum measurable electron density in the order of 10 16  m -3 . With the plasma diagnosis, electron density and low frequency tearing mode have been measured during the first experimental campaign.

A new radial neutron camera system has been developed and operated recently in the HL-2A tokamak to measure the spatial and time resolved 2.5 MeV D-D fusion neutron, enhancing the understanding of the energetic-ion physics. The camera mainly consists of a multichannel collimator, liquid-scintillation detectors, shielding systems, and a data acquisition system. Measurements of the D-D fusion neutrons using the camera have been successfully performed during the 2015 HL-2A experiment campaign. The measurements show that the distribution of the fusion neutrons in the HL-2A plasma has a peaked profile, suggesting that the neutral beam injection beam ions in the plasma have a peaked distribution. It also suggests that the neutrons are primarily produced from beam-target reactions in the plasma core region. The measurement results from the neutron camera are well consistent with the results of both a standard (235)U fission chamber and NUBEAM neutron calculations. In this paper, the new radial neutron camera system on HL-2A and the first experimental results are described.

About 13 kinds of diagnostics for energetic particle physics studied on the HuanLiuqi-2A (commonly referred to as HL-2A) tokamak are described in this paper. Their measurement ranges, resolutions, and arrangement are presented. Three under-construction diagnostics including imaging fast ion D-alpha, scintillator matrix (for hard X-ray detection), and bundle fission chamber are described in detail.

A 7-channel motional Stark effect polarimeter based on four polarizers and a spectrometer has been developed in the HL-2A tokamak, which is the first time successful utilizing this kind of polarimeter on a tokamak. The accuracy of the angle can reach ±0.25° in the calibration experiments. Pilot experiments of measuring the magnetic pitch angle have been successfully carried out in the weak motional Stark effect plasma discharge with toroidal magnetic field of ~1.3 T and beam energy of ~25 keV/amu. The pitch angles of magnetic field are obtained for 7 spatial points covering 24 cm along major radius with time resolution of 40 ms; the profiles of safety factor are obtained by combining with the Equilibrium and Reconstruction Fitting Code. The core value of safety factor (q) is less than 1 during the sawtooth oscillation and the position of q = 1 surface is well consistent with the results measured by soft X-ray array.

The diamagnetic concentric loop method in the HL-2A tokamak is described in this article. The system consists of two concentric poloidal loops with different areas enclosing the plasma column and a short time constant differential integrator, RC < 1 ms. The diamagnetic flux in HL-2A ranges from 1 mWb to 2 mWb for typical discharges with plasma current Ip = 100-400 kA. The integrator output ranges from 0.1 V to 0.2 V with time constant RC = 0.5 ms, and differential area ΔS∕Sout ≈ 7%. Using hybrid analog-digital compensation, the integration drift can be well compensated within 5 mV∕10 s, which can meet the requirement of the concentric loop system. In this method, the measurement of differential area ΔS is not required. The vacuum toroidal flux can be compensated by adjusting the resistance in the integration circuit for several discharges with toroidal field only, which minimizes the additional error produced by a measurement of differential area. The diamagnetic concentric loop system improved the signal to noise ratio by using the short time constant integration. The system with a resolution of ±0.2 kJ can be used to study rapid changes in plasma stored energy, such as the additional power absorbed by the plasma, and the energy loss caused by edge localized modes.

The Choi-Williams distribution (CWD) technique is introduced as a time-frequency tool for processing data measured from the new developed homodyne and the fixed frequency reflectometry in the HL-2A tokamak. The comparison between spectrogram and CWD for the simulated signal is presented. It indicates that the CWD can greatly improve the representation of the time-frequency content of the multi-components signal. Its effectiveness is demonstrated through two applications in HL-2A, which are the extraction of beat frequencies from the frequency modulated-continuous wave reflectometry (FM-CW) and the characterizing of the fluctuations. The density profile inversed from the group delay of the FM-CW and the density fluctuations deduced from the fixed-frequency reflectometry would be more reliable and accurate by using the CWD technique.

A fast electron bremsstrahlung (FEB) diagnostic technique based on cadmium telluride (CdTe) detector has been developed recently in the HL-2A tokamak for measurements of the temporal evolution of FEB emission in the energy range of 10-200 keV. With a perpendicular viewing into the plasma on the equatorial plane, the hard x-ray spectra with eight different energy channels are measured. The discrimination of the spectra is implemented by an accurate spectrometry. The system also makes use of fast digitization and software signal processing technology. An ambient environment of neutrons, gammas, and magnetic disturbance requires careful shielding. During electron cyclotron resonance heating, the generation of fast electrons and the oscillations of electron fishbone (e-fishbone) have been found. Using the FEB measurement system, it has been experimentally identified that the mode strongly correlates with the electron cyclotron resonance heating produced fast electrons with 30-70 keV.