Search

A new hybrid finite-difference (FD) and pseudospectral (PS) method adapted to the modeling of piezoelectric transducers (PZTs) is presented. The time-dependent equations of propagation are solved using the PS method while the electric field induced in the piezoelectric material is determined through a FD representation. The purpose of this combination is to keep the advantages of both methods in one model: the adaptability of FD representation to model piezoelectric elements with various geometries and materials, and the low number of nodes per wavelength required by the PS method. This approach is implemented to obtain an accurate algorithm to simulate the propagation of acoustic waves over large distances, directly coupled to the calculation of the electric field created inside the piezoelectric material, which is difficult with classical algorithms. These operations are computed using variables located on spatially and temporally staggered grids, which attenuate Gibbs phenomenon and increase the algorithm’s accuracy. The two-dimensional modeling of a PZT plate excited by a 50 MHz sinusoidal electrical signal is performed. The results are successfully compared to those obtained using the finite-element (FE) algorithm of ATILA™ software with configurations spatially and temporally adapted to the FE requirements. The cost efficiency of the FD-PS time-domain method is quantified and verified. [ABSTRACT FROM AUTHOR]

Dynamic acoustoelastic testing provides a more complete insight into the acoustic nonlinearity exhibited by micro-inhomogeneous media like granular and cracked materials. This method consists of measuring time of flight and energy modulations of pulsed ultrasonic waves induced by a low-frequency standing wave. Here pulsed ultrasonic head waves were employed to assess elastic and dissipative nonlinearities in a region near the surface of a solid. Synchronization of the ultrasound pulse sequence with the low-frequency excitation provided instantaneous variations in the elastic modulus and the attenuation as functions of the instantaneous low-frequency strain. Weak quadratic elastic nonlinearity and no dissipative nonlinearity were detected in duralumin. In limestone, distinction between tensile and compressive behaviors revealed an asymmetry in the acoustic nonlinearity and hysteresis in both the elastic modulus and the attenuation variations. Measured nonlinear acoustical parameters are in good agreement with values obtained by different techniques. Reversible acoustically induced conditioning modified the acoustic nonlinearity both quantitatively and qualitatively. It reduced tension-compression asymmetry, suggesting a nonequilibrium modification of the sources of acoustic nonlinearity. Additionally to the metrology of the acoustic nonlinearity, head wave based dynamic acoustoelastic testing may be a useful tool to monitor changes in the microstructure or the accumulation of damage in solids. [ABSTRACT FROM AUTHOR]