Search

Here, we use magnetically driven self-assembled achiral swimmers made of two to four superparamagnetic micro-particles to provide insight into how swimming kinematics develop in complex, shear-thinning fluids. Two model shear-thinning polymer fluids are explored, where measurements of swimming dynamics reveal contrasting propulsion kinematics in shear-thinning fluids vs a Newtonian fluid. When comparing the velocity of achiral swimmers in polymer fluids to their dynamics in water, we observe kinematics dependent on (1) no shear-thinning, (2) shear-thinning with negligible elasticity, and (3) shear-thinning with elasticity. At the step-out frequency, the fluidic environment's viscoelastic properties allow swimmers to propel faster than their Newtonian swimming speed, although their swimming gait remains similar. Micro-particle image velocimetry is also implemented to provide insight into how shear-thinning viscosity fluids with elasticity can modify the flow fields of the self-assembled magnetic swimmers. Our findings reveal that flow asymmetry can be created for symmetric swimmers through either the confinement effect or the Weissenberg effect. For pseudo-chiral swimmers in shear-thinning fluids, only three bead swimmers show swimming enhancement, while four bead swimmers always have a decreased step-out frequency velocity compared to their dynamics in water. [ABSTRACT FROM AUTHOR]

Here we investigate the dynamic behavior of self-assembling achiral swimmers in viscous media. The response of magnetically actuated swimmers of two differing geometries is explored under various uniform rotational field frequencies and amplitudes. Kinematic characteristics obtained from tracked swimming motion, including speed, precession angle (wobbling angle), and re-orientation time (turning rate), are determined and reveal nonlinear relationships between the dynamic response of the achiral swimmers and fluid viscosity, which induces drag forces that reduce the speed of propulsion and turning rates. We also find distinct regimes of swimmer motion that are dependent on both fluid viscosity and swimmer geometry. Similar viscosity and geometric dependence is observed for turning rates of swimmers when undergoing rapid changes in field orientation. The characteristic results obtained for microswimmer motion in viscous fluids will contribute to the development of control strategies for propelling other simple swimmers with two or more planes of symmetry. Characterized propulsion kinematics will aid in the optimization of swimmer designs and actuation approaches, critical for future low Reynolds number applications. [ABSTRACT FROM AUTHOR]

In this article, a porous hollow biotemplated nanoscale helix that can serve as a low Reynolds number robotic swimmer is reported. The nanorobot utilizes repolymerized bacterial flagella from Salmonella typhimurium as a nanotemplate for biomineralization. We demonstrate the ability to generate templated nanotubes with distinct helical geometries by using specific alkaline pH values to fix the polymorphic form of flagellar templates. Using uniform rotating magnetic fields to mimic the motion of the flagellar motor, we explore the swimming characteristics of these silica templated flagella and demonstrate the ability to wirelessly control their trajectories. The results suggest that the biotemplated nanoswimmer can be a cost-effective alternative to the current top-down methods used to produce helical nanorobots. [ABSTRACT FROM AUTHOR]

Advances in microrobotics for biological applications are often limited due to their complex manufacturing processes, which often utilize cytotoxic materials, as well as limitations in the ability to manipulate these small devices wirelessly. In an effort to overcome these challenges, we investigated a facile method for generating biocompatible hydrogel based robots that are capable of being manipulated using an externally generated magnetic field. Here, we experimentally demonstrate the fabrication and autonomous control of loaded-alginate microspheres, which we term artificial cells. In order to generate these microparticles, we employed a centrifuge-based method in which microspheres were rapidly ejected from a nozzle tip. Specifically, we used two mixtures of sodium alginate; one containing iron oxide nanoparticles and the other containing mammalian cells. This mixture was loaded into a needle that was fixed on top of a microtube containing calcium chloride, and then briefly centrifuged to generate hundreds of Janus microspheres. The fabricated microparticles were then magnetically actuated with a rotating magnetic field, generated using electromagnetic coils, prompting the particles to roll across a glass substrate. Also, using visionbased feedback control, a single artificial cell was manipulated to autonomously move in a programmed pattern. [ABSTRACT FROM AUTHOR]

Microorganisms can effectively generate propulsive force at the microscale where viscous forces overwhelmingly dominate inertia forces; bacteria achieve this task through flagellar motion. When swarming bacteria, cultured on agar plates, are blotted onto the surface of a microfabricated structure, a monolayer of bacteria forms what is termed a "bacterial carpet," which generates strong flows due to the combined motion of their freely rotating flagella. Furthermore, when the bacterial carpet coated microstructure is released into a low Reynolds number fluidic environment, the propulsive force of the bacterial carpet is able to give the microstructure motility. In our previous investigations, we demonstrated motion control of these bacteria powered microbiorobots (MBRs). Without any external stimuli, MBRs display natural rotational and translational movements on their own; this MBR self-actuation is due to the coordination of flagella. Here, we investigate the flow fields generated by bacterial carpets, and compare this flow to the flow fields observed in the bulk fluid at a series of locations above the bacterial carpet. Using microscale particle image velocimetry, we characterize the flow fields generated from the bacterial carpets of MBRs in an effort to understand their propulsive flow, as well as the resulting pattern of flagella driven self-actuated motion. Comparing the velocities between the bacterial carpets on fixed and untethered MBRs, it was found that flow velocities near the surface of the microstructure were strongest, and at distances far above, the surface flow velocities were much smaller. [ABSTRACT FROM AUTHOR]

Microorganisms can effectively generate propulsive force at the microscale where viscous forces overwhelmingly dominate inertia forces; bacteria achieve this task through flagellar motion. When swarming bacteria, cultured on agar plates, are blotted onto the surface of a microfabricated structure, a monolayer of bacteria forms what is termed a "bacterial carpet," which generates strong flows due to the combined motion of their freely rotating flagella. Furthermore, when the bacterial carpet coated microstructure is released into a low Reynolds number fluidic environment, the propulsive force of the bacterial carpet is able to give the microstructure motility. In our previous investigations, we demonstrated motion control of these bacteria powered microbiorobots (MBRs). Without any external stimuli, MBRs display natural rotational and translational movements on their own; this MBR self-actuation is due to the coordination of flagella. Here, we investigate the flow fields generated by bacterial carpets, and compare this flow to the flow fields observed in the bulk fluid at a series of locations above the bacterial carpet. Using microscale particle image velocimetry, we characterize the flow fields generated from the bacterial carpets of MBRs in an effort to understand their propulsive flow, as well as the resulting pattern of flagella driven self-actuated motion. Comparing the velocities between the bacterial carpets on fixed and untethered MBRs, it was found that flow velocities near the surface of the microstructure were strongest, and at distances far above, the surface flow velocities were much smaller.