Search

In the work developed, an overview and analysis of different types of shapes of ball mill lifters are made. An analysis has been made of the factors and parameters that are important to monitor in its operation to obtain the least wear of the grinding medium and to obtain the least consumption of electricity. Based on the analysis, 3 types of lifters and sizes were selected for further experiments. All components of the mill - drum, lifter liner, and grinding bodies will be designed using a CAD program, then printed using a 3D printer and installed on the laboratory ball mill. The material used for the grinding media will be made of bioplastic PLA (polylactide or polylactic acid). By using different shapes of lifters and different charge of ball mill it will be proven whether it affects the speed, trajectory and wear of the lifters in a ball mill. [ABSTRACT FROM AUTHOR]

Polylactic acid (PLA) plastics are biodegradable materials manufactured from PLA resin by melt spinning and solvent spinning methods. PLA is widely applied in textile fabric, non-woven, masks and sanitary napkins applications due to excellent safety, environmental protection and good mechanical properties. The process of 3D printing is continuous and able to produce complex three-dimensional structures. PLA/ZnO composite samples were fabricated by a 3D printer. ZnO acts as filler in PLA/ZnO composites to obtain the excellent properties like specific tensile properties and density. However, ZnO agglomeration occurred at higher concentration when viewed via SEM. Printing parameters such as infill density, raster orientation and infill pattern can influence the mechanical properties of 3D samples as well. The objective of this paper is to determine the effect of infill density with different ZnO concentration on the mechanical properties of 3D printed PLA/ZnO composites. Tensile and density measurement were carried out to determine the mechanical properties of composites. The influence of 80%, 90%, 100% infill rate and ZnO concentration varied by 1 and 5 mol. As a result, higher infill rate (100%) and optimum filler concentration (1 mol ZnO) give the excellent properties thus can be used for future applications. [ABSTRACT FROM AUTHOR]