Search

Insoluble electrically n-doped fullerene-containing films have been obtained by thermal annealing of a fullerene compound and a 1,3-dimethyl-2,3-dihydro-1

This study investigates the charge-transport properties of poly(3-hexylthiophene-2,5-diyl) (P3HT) and poly(ProDOT

Solution processed semiconductors are in demand for present and next-generation optoelectronic technologies ranging from displays to quantum light sources because of their scalability and ease of integration into devices with diverse form factors. One of the central requirements for semiconductors used in these applications is a narrow photoluminescence (PL) linewidth. Narrow emission linewidths are needed to ensure both color and single-photon purity, raising the question of what design rules are needed to obtain narrow emission from semiconductors made in solution. In this review we first examine the requirements for colloidal emitters for a variety of applications including light-emitting diodes, photodetectors, lasers, and quantum information science. Next, we will delve into the sources of spectral broadening, including “homogeneous” broadening from dynamical broadening mechanisms in single-particle spectra, heterogeneous broadening from static structural differences in ensemble spectra, and spectral diffusion. Then, we compare the current state of the art in terms of emission linewidth for a variety of colloidal materials including II-VI quantum dots (QDs) and nanoplatelets, III-V QDs, alloyed QDs, metal-halide perovskites including nanocrystals and 2D structures, doped nanocrystals, and, finally, as a point of comparison, organic molecules. We end with some conclusions and connections, including an outline of promising paths forward.

Doping has proven to be a critical tool for enhancing the performance of organic semiconductors in devices like organic light-emitting diodes. However, the challenge in working with high-ionization-energy (IE) organic semiconductors is to find p-dopants with correspondingly high electron affinity (EA) that will improve the conductivity and charge carrier transport in a film. Here, we use an oxidant that has been recently recognized to be a very strong p-type dopant, hexacyano-1,2,3-trimethylene-cyclopropane (CN6-CP). The EA of CN6-CP has been previously estimated via cyclic voltammetry to be 5.87 eV, almost 300 meV higher than other known high-EA organic molecular oxidants. We measure the frontier orbitals of CN6-CP using ultraviolet and inverse photoemission spectroscopy techniques and confirm a high EA value of 5.88 eV in the condensed phase. The introduction of CN6-CP in a film of large-band-gap, large-IE phenyldi(pyren-1-yl)phosphine oxide (POPy

Solution-processable interlayers are an important building block for the commercialization of organic electronic devices such as organic solar cells. Here, the potential of cross-linking to provide an insoluble, stable and versatile charge transport layer based on soluble organic semiconductors is studied. For this purpose, a photo-reactive tris-azide cross-linker is synthesized. The capability of the small molecular cross-linker is illustrated by applying it to a p-doped polymer used as a hole transport layer in organic solar cells. High cross-linking efficiency and excellent charge extraction properties of the cross-linked doped hole transport layer are demonstrated. However, at high doping levels in the interlayer, the solar cell efficiency is found to deteriorate. Based on charge extraction measurements and numerical device simulations, it is shown that this is due to diffusion of dopants into the active layer of the solar cell. Thus, in the development of future cross-linker materials, care must be taken to ensure that they immobilize not only the host, but also the dopants., Comment: 24 pages, 5 figures, supplemental material

We report a two-dimensional (2D) imine-linked covalent organic framework (COF) containing naphthalene diimide (NDI) redox groups, TAPB-NDI COF. Lithium-ion batteries (LIBs) with TAPB-NDI COF-based ...

A more robust mechanistic understanding of imine-linked two-dimensional covalent organic frameworks (2D COFs) is needed to improve their crystalline domain sizes and to control their morphology, both of which are necessary to fully realize their application potential. Here, we present evidence that 2D imine-linked COFs rapidly polymerize as crystalline sheets that subsequently reorganize to form stacked structures. Primarily, this study focuses on the first few minutes of 1,3,5-tris(4-aminophenyl)benzene and terephthaldehyde polymerization, which yields an imine-linked 2D COF. In situ X-ray diffraction and thorough characterization of solids obtained using gentler isolation and activation methods than have typically been used in the literature indicate that periodic imine-linked 2D structures form within 60 s, which then form more ordered stacked structures over the course of several hours. This stacking process imparts improved stability toward the isolation process relative to that of the early stage materials, which likely obfuscated previous mechanistic conclusions regarding 2D polymerization that were based on products isolated using harsh activation methods. This revised mechanistic picture has useful implications; the 2D COF layers isolated at very short reaction times are easily exfoliated, as observed in this work using high-resolution transmission electron microscopy and atomic force microscopy. These results suggest improved control of imine-linked 2D COF formation can be obtained through manipulation of the polymerization conditions and interlayer interactions. Qualitatively similar results were obtained for analogous materials obtained from 2,5-di(alkoxy)terephthaldehyde derivatives, except for the COF with the longest alkoxy chains examined (OC12H25), which, although shown by in situ X-ray diffraction to be highly crystalline in the reaction mixture, is much less crystalline when isolated than the other COFs examined, likely due to the more severe steric impact of the dodecyloxy functionality on the stacking process.

The mechanism and the nature of the species formed by molecular doping of the model polymer poly(3-hexylthiophene) (P3HT) in its regioregular (rre-) and regiorandom (rra-) forms in solution are investigated for three different dopants: the prototypical π-electron acceptor 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4TCNQ), the strong Lewis acid tris(pentafluorophenyl)borane (BCF), and the strongly oxidizing complex molybdenum tris[1-(methoxycarbonyl)-2-(trifluoromethyl)ethane-1,2-dithiolene] (Mo(tfd-CO2Me)3). In a combined optical and electron paramagnetic resonance study, we show that the doping of rreP3HT in solution occurs by integer charge transfer, resulting in formation of P3HT radical cations (polarons) for all of the dopants considered here. Remarkably, despite the different chemical nature of the dopants and dopant–polymer interaction, the formed polarons exhibit essentially identical optical absorption spectra. The situation is very different for the doping of rraP3HT, where we observe formation of a charge-transfer complex with F4TCNQ and of a “localized” P3HT polaron on nonaggregated chains upon doping with BCF, while there is no indication of dopant-induced species in the case of Mo(tfd-CO2Me)3. We estimate the ionization efficiency of the respective dopants for the two polymers in solution and report the molar extinction coefficient spectra of the three different species. Finally, we observe increased spin delocalization in regioregular compared to regiorandom P3HT by electron nuclear double resonance, suggesting that the ability of the charge to delocalize on aggregates of planarized polymer backbones plays a significant role in determining the doping mechanism.

Crystallization from solutions containing 2,2′-[naphthalene-1,8:4,5-bis(dicarboximide)-N,N′-diyl]-bis(ethylammonium) diiodide ((NDIC2)I2) and PbI2 has been investigated. Eight different materials a...

The two-photon absorption (2PA) properties are investigated for two series of organic, π-conjugated, fused-ring, quadrupolar A-π-D-π-A chromophores of the type originally developed as nonfullerene acceptors for organic photovoltaics. These molecules are found to exhibit large nondegenerate two-photon absorption (ND2PA) cross-sections (ca. 6-27 × 103 GM) in the near-infrared (NIR). In the first series, involving molecules of varying core size, ND2PA spectra and cross-sections characterized by femtosecond ND2PA spectroscopy in chloroform solutions reveal that increases in core size, and thus conjugation length, leads to substantially red-shifted and enhanced 2PA. In a second series, variation of the strength of the terminal acceptor (A) with constant core size (seven rings, indacene-based) led to less dramatic variation in the 2PA properties. Among the two core types studied, compounds in which the donor has a thieno[3,2-b]thiophene center demonstrate larger 2PA cross-sections than their indacene-centered counterparts, due to the greater electron-richness of their cores amplifying intramolecular charge transfer. Excited-state absorption (ESA) contributions to nonlinear absorption measured by open-aperture Z-scans are deduced for some of the compounds by analyzing the spectral overlap between 2PA bands and NIR ESA transitions obtained by ND2PA and transient absorption measurements, respectively. ESA cross-sections extracted from transient absorption and irradiance-dependent open-aperture Z-scans are in reasonable agreement, and their moderate magnitudes (ca. 10-21 m2) suggest that, although ESA contributions are non-negligible, the effective response is predominantly instantaneous 2PA.

The electrical and optoelectronic properties of organic semiconductor thin films can be tailored by mixing two molecular materials, e.g., by co-deposition. Possible resulting morphologies include p...

Understanding how Frenkel excitons efficiently split to form free-charges in low-dielectric constant organic semiconductors has proven challenging, with many different models proposed in recent years to explain this phenomenon. Here, we present evidence that a simple model invoking a modest amount of charge delocalization, a sum over the available microstates, and the Marcus rate constant for electron transfer can explain many seemingly contradictory phenomena reported in the literature. We use an electron-accepting fullerene host matrix dilutely sensitized with a series of electron donor molecules to test this hypothesis. The donor series enables us to tune the driving force for photoinduced electron transfer over a range of 0.7 eV, mapping out normal, optimal, and inverted regimes for free-charge generation efficiency, as measured by time-resolved microwave conductivity. However, the photoluminescence of the donor is rapidly quenched as the driving force increases, with no evidence for inverted behavior, nor the linear relationship between photoluminescence quenching and charge-generation efficiency one would expect in the absence of additional competing loss pathways. This behavior is self-consistently explained by competitive formation of bound charge-transfer states and long-range or delocalized free-charge states, where both rate constants are described by the Marcus rate equation. Moreover, the model predicts a suppression of the inverted regime for high-concentration blends and efficient ultrafast free-charge generation, providing a mechanistic explanation for why Marcus-inverted-behavior is rarely observed in device studies.

Molecular organic fluorophores are currently used in organic light-emitting diodes, though non-emissive triplet excitons generated in devices incorporating conventional fluorophores limit the efficiency. This limit can be overcome in materials that have intramolecular CT excitonic states and associated small singlet-triplet energy; triplets can be converted to emissive singlet excitons resulting in efficient delayed fluorescence. However, the mechanistic details of the spin interconversion have not yet been fully resolved. We report transient ESR studies that allow direct probing of the spin conversion in a series of delayed fluorescence fluorophores with varying energy gaps between LE and CT triplets. The observation of distinct triplet signals, unusual in transient ESR, suggests that multiple triplets mediate the photophysics for efficient light emission in delayed fluorescence emitters. We reveal that as the energy separation between LE and CT triplets decreases, spin interconversion changes from a direct, singlet-triplet mechanism to an indirect mechanism involving intermediate states.

In analogy to their oxide counterparts, two-dimensional (2D) hybrid organic–inorganic perovskites have been classified, in many cases, as either Dion–Jacobson (DJ) or Ruddlesden–Popper (RP) structu...

The role electron-transport layers (ETLs) play in perovskite solar cells (PSCs) is still widely debated. Conduction band alignment at the perovskite/ETL interface has been suggested to be an import...

Surface doping of graphene with redox-active molecules is an effective approach to tune its electrical properties, in particular for application as transparent electrodes. Here we present a study and application of surface n-doping of graphene with the molecular reductant (pentamethylcyclopentadienyl)(1,3,5-trimethylbenzene)ruthenium dimer ([RuCp*Mes]2). Photoemission spectroscopy and carrier-transport measurements are combined to investigate doping-induced changes in the electronic structure of the interface between graphene and phenyldi(pyren-2-yl)phosphine oxide (POPy2), which is a low-electron-affinity material that has been used as an electron-transport layer (ETL) in organic light-emitting diodes. Photoemission and Hall voltage measurements confirm the n-doping of graphene. Doping with 1–2 nm of [RuCp*Mes]2 reduces the graphene work function by 1.8 eV and the electron injection barrier by more than 1 eV, enhancing electron injection into POPy2 by several orders of magnitude. Graphene/POPy2/Al diodes...

(4NPEA)2PbI4 (4NPEA = 4-nitrophenylethylammonium) is the first 3 × 3 corrugated 2D organic-Pb/I perovskite. The nitro groups are involved in cation–cation and cation-iodide interactions. The structure contains both highly distorted and near-ideal PbI6 octahedra, consistent with the observation of two 207Pb NMR resonances, while the optical properties resemble those of other 2D perovskites with distorted PbI6 octahedra.

Aryl sulfones and phosphine oxides are widely used as molecular building blocks for host materials in the emissive layers of organic light-emitting diodes. In this context, the chemical stability of such molecules in the triplet state is of paramount concern to long-term device performance. Here, we explore the triplet excited-state (T1) chemical stabilities of aryl sulfonyl and aryl phosphoryl molecules by means of UV absorption spectroscopy and density functional theory calculations. Both the sulfur–carbon bonds of the aryl sulfonyl molecules and the phosphorus–carbon bonds of aryl phosphoryl derivatives are significantly more vulnerable to dissociation in the T1 state when compared to the ground (S0) state. Although the vertical S0 → T1 transitions correspond to nonbonding → π-orbital transitions, geometry relaxations in the T1 state lead to σ–σ* character over the respective sulfur–carbon or phosphorus–carbon bond, a result of significant electronic state mixing, which facilitates bond dissociation. B...

The thermoelectric power factor of a broad range of organic semiconductors scales with their electrical conductivity according to a widely obeyed power law, and therefore, strategies that permit this empirical trend to be surpassed are highly sought after. Here, tensile drawing of the conjugated polymer poly(3-hexylthiophene) (P3HT) is employed to create free-standing films with a high degree of uniaxial alignment. Along the direction of orientation, sequential doping with a molybdenum tris(dithiolene) complex leads to a 5-fold enhancement of the power factor beyond the predicted value, reaching up to 16 mu W m(-1) K-2 for a conductivity of about 13 S cm(-1). Neither stretching nor doping affect the glass transition temperature of P3HT, giving rise to robust free-standing materials that are of interest for the design of flexible thermoelectric devices. Funding Agencies|Swedish Research Council [2016-06146]; Knut and Alice Wallenberg Foundation through a Wallenberg Academy Fellowship; European Research Council (ERC) [637624]; U.S. National Science Foundation through the DMREF program [DMR-1729737]

We examine the role of surface passivation on carrier trapping and nonlinear recombination dynamics in hybrid metal-halide perovskites by means of excitation correlation photoluminescence (ECPL) spectroscopy. We find that carrier trapping occurs on subnanosecond timescales in both control (unpassivated) and passivated samples, which is consistent within a shallow-trap model. However, the impact of passivation has a direct effect on both shallow and deep traps. Our results reveal that the effect of passivation of deep traps is responsible for the increase of the carrier lifetimes, while the passivation of shallow traps reduces the excitation density required for shallow-trap saturation. Our work demonstrates how ECPL provides details about the passivation of shallow traps beyond those available via conventional time-resolved photoluminescence techniques.

Although there is an agreement about the local structural order of semiconducting polymers such as poly(3-hexylthiophene) (P3HT), there is still a debate over the impact of molecular doping. One prevalent interpretation is that dopant molecules intercalate in the π–π stacking of crystallites; however, this idea has recently been challenged. We present here electron diffraction measurements of P3HT doped with the two dopants 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4TCNQ) and molybdenum tris[1-(methoxycarbonyl)-2-(trifluoromethyl)-ethane-1,2-dithiolene] (Mo(tfd-CO2Me)3), which have considerably different sizes and shapes, processed by different doping techniques. We observe a reduction in the π–π spacing of P3HT upon doping with both dopant molecules and doping techniques. These data are not consistent with both of the dopants intercalating in the π–π stacks and an alternative explanation is, therefore, required to explain these results. Density functional theory calculations for P3HT model o...

Substitution of a varying number of 9H-carbazole donors onto 2-(pentafluorophenyl)-5-phenyl-1,3,4-oxadiazole yields a series of donor–acceptor compounds with similar electrochemical band gaps, but dissimilar optical properties. Each substitution of a carbazole onto the 2- and 4-positions results in a 150–200 meV stabilization of the first singlet excited state, evident in the fluorescent emission. The first triplet excited state is less sensitive to these substitutions, leading to a reduced energy separation between the singlet and triplet states, ΔEST, with increasing carbazole content. OLED devices made using the donor–acceptor compounds exhibiting the lowest ΔEST were fabricated and exhibit sky blue emission with an external quantum efficiency of up to 24.4% at a luminance of 10 cd m–2, and 9.2% at 1000 cd m–2.

The diffusivity of dopants in semiconducting polymers is of high interest as it enables methods of sequential doping but also affects device stability. In this study, we investigate the diffusion of a bulky sequentially deposited p-dopant in poly(3-hexylthiophene) (P3HT) thin films using nondestructive in situ infrared (IR) spectroscopy and photoelectron spectroscopy (PES). We probe dopant diffusion into the polymer film at varying coverage by differentially evaluating electron transfer in the bulk and at the surface. Thereby it is possible to determine dopant coverages at which both electron transfer and incorporation of dopants are saturated. By use of PES, neutral and charged dopants can be distinguished, revealing that charged dopants are less mobile in the diffusion process than neutral molecules. We further compare the diffusivity in semicrystalline and fully amorphous P3HT. We find that at high coverage semicrystalline P3HT seems to yield a higher capacity for dopants than fully amorphous P3HT. A t...

In this investigation, the synthesis and photophysical properties of a series of new chromophores featuring Pt(II) σ-bonded to perylenediimide (PDI) cores are reported. A Pt(PPh3)2X (X = Cl, Br) moiety was attached to PDI in either the ortho or the bay position (2- or 1-positions respectively) or a Pt(PPh3)2 subunit was used to bridge two bay positions (1- and 12-positions) forming a Pt(II) cyclometalate. Through a combination of steady-state and transient absorption and photoluminescence spectroscopy, the excited-state dynamics of these molecules were revealed, indicating that the Pt atom location on the PDI has a substantial impact on observed intersystem crossing (ISC) rates. The ISC time constants for the bay-substituted and cyclometalated PDIs are between 2.67 and 1.29 ns, respectively, determined by the singlet fluorescence decays from the initially populated singlet excited states. In the case of the ortho-substituted PDI, ISC to the triplet state occurs on the ultrafast time scale with a time cons...

n-Doping of P(BTP-DPP) with the organometallic dimer (RuCp*mes)2, processed through sequential casting, is reported. Maximum conductivities of 0.45 S cm–1 were achieved that are relatively high for n-type semiconducting polymers. Electron paramagnetic resonance spectroscopy, ultraviolet visible spectroscopy, and ultraviolet photoemission spectroscopy are consistent with the introduction of high carrier concentrations by sequential processing, leading to bipolaronic, or otherwise spin-paired carriers. P(BTP-DPP) has glassy ordering in thin films, observed using wide angle X-ray scattering, that allows efficient incorporation of the dopant as a function of processing condition. The changes in electrical conductivity as a function of the dopant concentration are proposed to occur by charge percolation through domains with a mixture of polaronic and bipolaronic carriers.

The development of processes to controllably dope two-dimensional semiconductors is critical to achieving next-generation electronic and optoelectronic devices. In this study, n- and p-doping of highly uniform large-area trilayer WSe2 is achieved by treatment with solutions of molecular reductants and oxidants. The sign and extent of doping can be conveniently controlled by the redox potential of the (metal−)organic molecules, the concentration of dopant solutions, and the treatment time. Threshold voltage shifts, the direction of which depends on whether a p- or n-dopant is used, and tunable channel current are observed in doped WSe2 field-effect transistors. Detailed physical characterization including photoemission (ultraviolet photoelectron spectroscopy and X-ray photoelectron spectroscopy) and Raman spectroscopy provides fundamental understanding of the underlying mechanism. The origin of the doping is the electron-transfer reactions between molecular dopants and 2D semiconductors and results in a sh...

Employment of thin perovskite shells and metal halides as surface-passivants for colloidal quantum dots (CQDs) has been an important, recent development in CQD optoelectronics. These have opened the route to single-step-deposited high-performing CQD solar cells. These promising architectures employ a CQD hole-transporting layer (HTL) whose intrinsically shallow Fermi level (EF) restricts band-bending at maximum power-point during solar cell operation limiting charge collection. Here, we demonstrate a generalized approach to effectively balance band-edge energy levels of the main CQD absorber and charge-transport layer for these high-performance solar cells. Briefly soaking the CQD HTL in a solution of the metal–organic p-dopant, molybdenum tris(1-(trifluoroacetyl)-2-(trifluoromethyl)ethane-1,2-dithiolene), effectively deepens its Fermi level, resulting in enhanced band bending at the HTL:absorber junction. This blocks the back-flow of photogenerated electrons, leading to enhanced photocurrent and fill fac...

Surface molecular doping of graphene has been shown to modify its work function and increase its conductivity. However, the associated shifts in work function and increases in carrier concentration are highly coupled and limited by the surface coverage of dopant molecules on graphene. Here we show that few-layer graphene (FLG) can be doped using a hybrid approach, effectively combining surface doping by larger (metal−)organic molecules and intercalation of smaller molecules, such as Br2 and FeCl3, into the bulk. Intercalation tunes the carrier concentration more effectively, whereas surface doping of intercalated FLG can be used to tune its work function without reducing the carrier mobility. This multimodal doping approach yields a very high carrier density and tunable increase in the work function for FLG, demonstrating a new versatile platform for fabricating graphene-based contacts for electronic, optoelectronic, and photovoltaic applications.

N-Heterocyclic carbenes (NHCs) bind strongly to gold and other metals. This work experimentally probes the effect of NHCs on the work function (WF) of gold for the first time, theoretically analyzes the origin of this effect, and examines the effectiveness of NHC-modified gold as an electron-injecting electrode. UV photoelectron spectroscopy shows the WF of planar gold is reduced by nearly 2 eV to values of 3.3–3.5 eV. This effect is seen for NHCs with various heterocyclic cores, and with either small or large N,N′-substituents. DFT calculations indicate the WF reduction results from both the interface dipole formed between the NHC and the gold and from the NHC molecular dipole. For N,N′-diisopropyl-NHCs, an important contributor to the former is charge transfer associated with coordination of the carbene carbon atom to gold. In contrast, the carbene carbon of N,N′-2,6-diisopropylphenyl-NHCs is not covalently bound to gold, resulting in a lower interface dipole; however, a larger molecular dipole partiall...

In disordered organic semiconductors, the transfer of a rather localized charge carrier from one site to another triggers a deformation of the molecular structure quantified by the intramolecular relaxation energy. A similar structural relaxation occurs upon population of intermolecular charge-transfer (CT) states formed at organic electron donor (D)-acceptor (A) interfaces. Weak CT absorption bands for D A complexes occur at photon energies below the optical gaps of both the donors and the C-60 acceptor as a result of optical transitions from the neutral ground state to the ionic CT state. In this work, we show that temperature-activated intramolecular vibrations of the ground state play a major role in determining the line shape of such CT absorption bands. This allows us to extract values for the relaxation energy related to the geometry change from neutral to ionic CT complexes. Experimental values for the relaxation energies of 20 D:C-60 CT complexes correlate with values calculated within density functional theory. These results provide an experimental method for determining the polaron relaxation energy in solid-state organic D-A blends and show the importance of a reduced relaxation energy, which we introduce to characterize thermally activated CT processes. This work was supported by the German Federal Ministry for Education and Research (BMBF) through the InnoProfille project "Organische p-i-n Bauelemente 2.2". F.O. would like to thank the German Research Foundation (DFG) for financial support (Grant OR 349/1). This work was partly supported by the DFG within the Cluster of Excellence "Center for Advancing Electronics Dresden." F.P. and D.N. acknowledge funding by the DFG via the SFB 951 "HIOS". T.V. acknowledges the Agency for Innovation by Science and Technology in Flanders (IWT) for funding his Ph.D. The work at Georgia Tech was supported by the Department of the Navy, Office of Naval Research Award No. N00014-14-1-0580 (CAOP MURI) and through a state-sponsored scholarship for graduate students to Y.F. from the China Scholarship Council. We acknowledge the Center for Information Services and High Performance Computing (ZIH) at TU Dresden for computational resources. We thank Prof. Bauerle from the University of Ulm for the supply of DH4T and DH6T and Markus Hummert for P4-Ph4-DIP and BP-Bodipy.

Chemisorption of an organic monolayer to tune the surface properties of a transparent conductive oxide (TCO) electrode can improve the performance of organic electronic devices that rely on efficient charge transfer between an organic active layer and a TCO contact. Here, a series of perylene diimides (PDIs) was synthesized and used to study relationships between monolayer structure/properties and electron transfer kinetics at PDI-modified indium-tin oxide (ITO) electrodes. In these PDI molecules, one of the imide substituents is a benzene ring bearing a phosphonic acid (PA) and the other is a bulky aryl group that is twisted out of the plane of the PDI core. The size of the bulky aryl group and the substitution of the benzene ring bearing the PA were both varied, which altered the extent of aggregation when these molecules were absorbed as monolayer films (MLs) on ITO, as revealed by both attenuated total reflectance (ATR) and total internal reflection fluorescence spectra. Polarized ATR measurements indicate that, in these MLs, the long axis of the PDI core is tilted at an angle of 33-42° relative to the surface normal; the tilt angle increased as the degree of bulky substitution increased. Rate constants for electron transfer (k

In recent years colloidal quantum dot (CQD) photovoltaics have developed rapidly because of novel device architectures and robust surface passivation schemes. Achieving controlled net doping remains an important unsolved challenge for this field. Herein we present a general molecular doping platform for CQD solids employing a library of metal–organic complexes. Low effective ionization energy and high electron affinity complexes are shown to produce n- and p-doped CQD solids. We demonstrate the obvious advantage in solar cells by p-doping the CQD absorber layer. Employing photoemission spectroscopy, we identify two doping concentration regimes: lower concentrations lead to efficient doping, while higher concentrations also cause large surface dipoles creating energy barriers to carrier flow. Utilizing the lower concentration regime, we remove midgap electrons leading to 25% enhancement in the power conversion efficiency relative to undoped cells. Given the vast number of available metal–organic complexes,...

Single-walled carbon nanotube (SWCNT) transistors are among the most developed nanoelectronic devices for high-performance computing applications. While p-type SWCNT transistors are easily achieved through adventitious adsorption of atmospheric oxygen, n-type SWCNT transistors require extrinsic doping schemes. Existing n-type doping strategies for SWCNT transistors suffer from one or more issues including environmental instability, limited carrier concentration modulation, undesirable threshold voltage control, and/or poor morphology. In particular, commonly employed benzyl viologen n-type doping layers possess large thicknesses, which preclude top-gate transistor designs that underlie high-density integrated circuit layouts. To overcome these limitations, we report here the controlled n-type doping of SWCNT thin-film transistors with a solution-processed pentamethylrhodocene dimer. The charge transport properties of organorhodium-treated SWCNT thin films show consistent n-type behavior when characterized in both Hall effect and thin-film transistor geometries. Due to the molecular-scale thickness of the organorhodium adlayer, large-area arrays of top-gated, n-type SWCNT transistors are fabricated with high yield. This work will thus facilitate ongoing efforts to realize high-density SWCNT integrated circuits.

Transparent conducting oxides (TCOs), such as indium tin oxide and zinc oxide, play an important role as electrode materials in organic-semiconductor devices. The properties of the inorganic-organic interface-the offset between the TCO Fermi level and the relevant transport level, the extent to which the organic semiconductor can wet the oxide surface, and the influence of the surface on semiconductor morphology-significantly affect device performance. This review surveys the literature on TCO modification with phosphonic acids (PAs), which has increasingly been used to engineer these interfacial properties. The first part outlines the relevance of TCO surface modification to organic electronics, surveys methods for the synthesis of PAs, discusses the modes by which they can bind to TCO surfaces, and compares PAs to alternative organic surface modifiers. The next section discusses methods of PA monolayer deposition, the kinetics of monolayer formation, and structural evidence regarding molecular orientation on TCOs. The next sections discuss TCO work-function modification using PAs, tuning of TCO surface energy using PAs, and initiation of polymerizations from TCO-tethered PAs. Finally, studies that examine the use of PA-modified TCOs in organic light-emitting diodes and organic photovoltaics are compared.

We investigate the distribution of valence and tail states in copper phthalocyanine (CuPc) upon the introduction of minute amounts of the p-dopant molybdenum tris[1,2-bis(trifluoromethyl)ethane-1,2-dithiolene] (Mo(tfd)3), using a combination of electron spectroscopy and carrier transport measurements. Density of gap states, conductivity, and hole-hopping activation energy are measured. We observe the progressive filling (and deactivation) of the deepest tail states by charges introduced by the dopants, as well as significant broadening of the CuPc density of states. Simulations relate this broadening to the electrostatic and structural disorder induced by the dopant in the CuPc matrix.

Although bis(diarylamino) mixed-valence radical cations have been quite extensively studied, their bis(carbazolyl) analogues have not, even though the hole-transporting properties of species such as of 4,4′-bis(9H-carbazol-9-yl)-1,1′-biphenyl, CBP, are widely exploited in organic light-emitting diodes. This work reports the generation by chemical oxidation of the radical cations of 4,4′-bis(3,6-di-tert-butyl-9H-carbazol-9-yl)-1,1′-biphenyl (a model for the unstable radical cation of CBP), 2,7-bis(3,6-di-tert-butyl-9H-carbazol-9-yl)-4,5,9,10-tetrahydropyrene, and 2,7-bis(3,6-di-tert-butyl-9H-carbazol-9-yl)pyrene. The visible and near-IR spectra of these cations have been compared to those of the corresponding dication spectra, to the spectrum of the 3,6-di-tert-butyl-9-(4-(tert-butyl)phenyl)-9H-carbazole radical cation, and to the results of time-dependent density-functional calculations. The biphenyl- and pyrene-bridged species are found to be localized (class-II) mixed-valence compounds, whereas stronger...

Electron acceptors are important components of π-conjugated materials, but the strong electron-withdrawing properties of the required synthetic intermediates often make them poor substrates in synthetic schemes designed around conventional organometallic cross-coupling. Here, strong benzodiimine-based acceptors, including 5,6-difluoro[2,1,3]benzothiadiazole, 5,6-dicyano[2,1,3]benzothiadiazole, 5,6-dicyanobenzo[d][1,2,3]triazole, 6,7-dicyanoquinoxaline, and 6,7-dinitroquinoxaline, are shown to undergo facile palladium-catalyzed C-H direct arylation with a variety of bromoarenes in moderate to high yields. The electrochemical characteristics of di-2-thienyl derivatives synthesized using this methodology are compared and suggest that, in an electron-transfer sense, 5,6-dicyano[2,1,3]benzothiadiazole is a comparably strong acceptor to benzo[1,2-c:4,5-c']bis[1,2,5]thiadiazole. The synthetic results suggest that high electron-withdrawing ability, which has traditionally limited reaction yields and structural variety in organic electronic materials, may be advantageous when employing C-H activated direct arylation in certain circumstances.

Rate constants for the dimerization of FeCp*C6H6, RuCp*mes, RhCp2, RhCp*Cp, and IrCp*Cp (Cp* = pentamethylcyclopentadienyl; mes = 1,3,5-trimethylbenzene; Cp = cyclopentadienyl) have been investigated by cyclic voltammetry. Rates increased in the order FeCp*C6H6 ≪ RhCp*Cp ∼ RhCp2 < RuCp*mes and IrCp*Cp. The difference in rates between the Rh compounds and the Ru and Ir species is consistent with the thermodynamic driving forces for dimerization estimated from DFT calculations. However, the sluggish dimerization of FeCp*C6H6 cannot be rationalized with purely thermodynamic considerations and may be attributable to the very different spin-density distribution in this species. On the basis of the activation parameters for dimerization, determined by variable temperature cyclic voltammetry, and those previously determined for dissociation of the corresponding dimer, the free energy of dimerization for the RhCp*Cp monomer was estimated to be −43 kJ mol–1, and the effective redox potential for the RhCp*Cp+/ 0.5(...

The dimers of pentamethyliridocene and ruthenium pentamethylcyclopentadienyl mesitylene, (IrCp*Cp)2 and (RuCp*mes)2, respectively, are shown here to be effective solution-processable reagents for lowering the work functions of electrode materials; this approach is compared to the use of solution-deposited films of ethoxylated poly(ethylenimine) (PEIE). The work functions of indium tin oxide (ITO), zinc oxide, and gold electrodes can be reduced to 3.3-3.4 eV by immersion in a toluene solution of (IrCp*Cp)2; these values are similar to those that can be obtained by spin-coating a thin layer of PEIE onto the electrodes. The work-function reductions achieved using (IrCp*Cp)2 are primarily attributable to the interface dipoles associated with the formation of submonolayers of IrCp*Cp(+) cations on negatively charged substrates, which in turn result from redox reactions between the dimer and the electrode. The electrical properties of C60 diodes with dimer-modified ITO cathodes are similar to those of analogous devices with PEIE-modified ITO cathodes.

A donor-acceptor-donor triad material in which two quinquethiophene moieties are attached via nonconjugated, flexible bridges to the 1,7-positions (80% isomer) and 1,6-positions (20% isomer) of a perylene diimide (PDI-5T) has been synthesized, and its nonlinear suppression of nanosecond laser pulses in the 680-750 nm range has been studied. The kinetics of the photoinduced charge separation processes have been characterized using femtosecond transient pump-probe spectroscopy. Excitation of either the quinquethiophene donor or perylene diimide acceptor leads to ultrafast (700 fs) photoinduced charge separation, yielding quinquethiophene and perylene diimide radical ions that are strongly absorbing in the red-near-IR region. Despite the short lifetime (52 ps) of the charge-separated state, reasonably strong nonlinear suppression of nanosecond pulses, with figures-of-merit up to 14, has been realized with 4 mM solutions of PDI-5T. Although the radical ion absorption (RIA) is much stronger at 750 nm than that at 680 or 700 nm, the best optical suppression figures-of-merit were observed at 680 and 700 nm. Comparison of the optical parameters at these wavelengths suggests that the stronger ground-state absorption, due to aggregates of PDI-5T, is responsible for the enhanced figure-of-merit at the shorter wavelength.

Organic materials possess many key attributes that make them suitable for exploitation in all-optical signal processing applications including facile tunability of their optical properties, strong and ultrafast nonlinear optical response, and potential for integration into device structures. In this perspective, we present molecular design guidelines for organic chromophores that could serve as the active constituents for such materials. Using a relatively simple model, a candidate class of chromophores, namely cyanine-like polymethines, is identified based on promising microscopic nonlinear optical properties in the near-IR spectral region. The challenges associated with translating these microscopic properties into materials with macroscopic properties suitable for device applications are presented along with molecular engineering approaches for overcoming these hurdles.