Search

Two-dimensional (2D) Ruddlesden-Popper perovskites (RPPs) of the form PEA2Pb1-xSnxI4 can be used as the tunable active layer in photovoltaics, as the passivating layer for 3D perovskite photovoltaics or in light emitting diodes. Here, we show a nonlinear band gap behavior with Sn content in mixed phase 2D RPPs. Density functional theory calculations (with and without spin-orbit coupling) are employed to study the effects of the short-range ordering of Pb and Sn in PEA2Pb1-xSnxI4 compositions with x = 0, 0.25, 0.5, 0.75, and 1. Analysis of the partial density of states shows that the energy mismatch of the Pb 6s and Sn 5s states in the valence band maximum determines the nonlinearity of the band gap, leading to a bowing parameter of 0.35-0.38 eV. This research provides a critical insight for the design of future metal alloy 2D perovskite materials. The positions of the tunable energy band discontinuity may point to intraband transitions of interest to device engineers.

Hybrid inorganic-in-organic semiconductors are an attractive class of materials for optoelectronic applications. Traditionally, the thicknesses of organic semiconductors are kept below 1 μm due to poor charge transport in such systems. However, recent work suggests that charge carriers in such organic semiconductors can be transported over centimeter length scales opposing this view. In this work, a unipolar X-ray photoconductor based on a bulk heterojunction architecture, consisting of poly(3-hexylthiophene), a C70 derivative, and high atomic number bismuth oxide nanoparticles operating in the 0.1–1 mm thickness regime is demonstrated, having a high sensitivity of ∼160 μC mGy–1 cm–3. The high performance enabled by hole drift lengths approaching a millimeter facilitates a device architecture allowing a high fraction of the incident X-rays to be attenuated. An X-ray imager is demonstrated with sufficient resolution for security applications such as portable baggage screening at border crossings and public events and scalable medical applications.

Large-scale incorporation of nanomaterials into manufactured materials can only take place if they are suitably dispersed and mobile within the constituent components, typically within a solution/ink formulation so that the additive process can commence. Natural hydrophobicity of many nanomaterials must be overcome for their successful incorporation into any solution-based manufacturing process. To date, this has been typically achieved using polymers or surfactants, rather than chemical functionalization, to preserve the remarkable properties of the nanomaterials. Quantifying surfactant or dispersion technique efficacy has been challenging. Here we introduce a new methodology to quantify dispersions applicable to high-weight fraction suspensions of most nanomaterials. It’s based on centrifuging and weighing residue of undispersed material. This enables the determination of the efficacy of surfactants to disperse nanomaterials (e.g. ultrasonication power and duration) and leads to increased nanomaterial solution loading. To demonstrate this technique, we assessed carbon nanotube dispersions using popular surfactants: Benzalkonium chloride (ADBAC), Brij®52, Brij®58, Pluronic®F127, sodium dodecyl sulfate (SDS), sodium dodecylbenzenesulfonate (SDBS), Triton™ X-100, Triton™X-405 and Tween®80, evaluating the dispersion outcome when varying sonicator power and horn depth, as well as imaging sono-intensity within the solution with luminol. The methodology is shown to be applicable for high-weight fraction nanomaterial suspensions, enabling greater deployment.

An efficient inverted polymer solar cell (PSC)-based on bulk heterojunction composites of poly(3-hexylthiophene) (P3HT) and phenyl C61-butryricacid methyl ester (PCBM) has been demonstrated by incorporating facile low-temperature solution-processed Mg-doped SnO2 (Mg:SnO2) nanoparticles as the cathode interfacial layer. Compared to the pure SnO2, the PSCs based on Mg:SnO2 interfacial layer exhibits excellent properties with a power conversion efficiency (PCE) of up to 4.08%, increased from 2.77%, corresponding to a significant 47.29% PCE enhancement. The improved photovoltaic performance is ascribed to the increased electron mobility, elevated electrical conductivity and optimized surface morphology, which makes it an excellent growth platform for a flat and high quality photoactive layer. Furthermore, we show the Mg:SnO2 interfacial layers to dramatically improve the electron extraction and effectively suppress the photogenerated carrier recombination. The low-temperature solution-processed SnO2 with Mg d...

Boronic acid functionalized multiwalled carbon nanotubes (bf-MWCNTs) were synthesized via a facile low temperature process and introduced in PEDOT:PSS as the composite hole transport layer (HTL), which improved the power conversion efficiency (PCE) of polymer solar cells (PSCs). The devices utilized PCDTBT:PC71BM active layers had achieved an optimal PCE of 6.953%, leading to 28% enhancement comparing to the device based on pristine PEDOT:PSS HTL. The PEDOT:PSS:bf-MWCNTs composite HTLs exhibited remarkable enhancement on hole mobility and electrical conductivity, which were beneficial to the hole extraction and transport on interface. Meanwhile, the work function (WF) of HTLs had an increase after bf-MWCNTs doping, which was matched with the highest occupied molecular orbital (HOMO) of the donor material, further improving the hole transport. Therefore, the incorporation of bf-MWCNTs efficiently improved the hole extraction and transport from active layer to the electrode.

Incorporating plasmonic nanoparticles in organic photovoltaic (OPV) devices can increase the optical thickness of the organic absorber layer while keeping its physical thickness small. However, trade-offs between various structure parameters have caused contradictions regarding the effectiveness of plasmonics in the literature, that have somewhat stunted the progressing of a unified theoretical understanding for practical applications. We examine the optical enhancement mechanisms of practical PCDTBT:PC70BM OPV cells incorporating metal nanoparticles. The plasmonic near- and far-field contributions are differentiated, with spectrum- and space-wide current enhancements found in the plasmon scattering regime and spectrum- and space-specific current enhancements in the near-field regime. A remarkable system complexity is revealed, where the plasmonic enhancement trends change and even reverse by simple changes in the device geometry. This accounts for many of the contradictory results published in the literature on plasmonic effects in OPVs. By exploring the full structural parameter phase-space we are able to now propose a unified representation that intuitively explains literature findings and trends. Our results show that an already optimized PCDTBT:PC70BM cell can be further optically enhanced by plasmonic effects by at least 20% with the incorporation of Ag nanoparticles.

The fabrication of highly functional materials for practical devices requires a deep understanding of the association between morphological and structural properties and applications. A controlled hydrothermal method to produce single crystal ZnO hexagonal nanodisks, nanorings, and nanoroses using a mixed solution of zinc sulfate (ZnSO4) and hexamethylenetetramine (HMTA) without the need of catalysts, substrates, or templates at low temperature (75 °C) is introduced. Metal-semiconductor-metal (MSM) ultraviolet (UV) detectors were fabricated based on individual and multiple single-crystal zinc oxide (ZnO) hexagonal nanodisks. High quality single crystal individual nanodisk devices were fabricated with inkjet-printed silver electrodes. The detectors fabricated show record photoresponsivity (3300 A/W) and external quantum efficiency (1.2 × 10(4)), which we attribute to the absence of grain boundaries in the single crystal ZnO nanodisk and the polarity of its exposed surface.

Transparent, highly percolated networks of regioregular poly(3-hexylthiophene) (rr-P3HT)-wrapped semiconducting single-walled carbon nanotubes (s-SWNTs) are deposited, and the charge transfer processes of these nanohybrids are studied using spectroscopic and electrical measurements. The data disclose hole doping of s-SWNTs by the polymer, challenging the prevalent electron-doping hypothesis. Through controlled fabrication, high- to low-density nanohybrid networks are achieved, with low-density hybrid carbon nanotube networks tested as hole transport layers (HTLs) for bulk heterojunction (BHJ) organic photovoltaics (OPV). OPVs incorporating these rr-P3HT/s-SWNT networks as the HTL demonstrate the best large area (70 mm(2)) carbon nanotube incorporated organic solar cells to date with a power conversion efficiency of 7.6%. This signifies the strong capability of nanohybrids as an efficient hole extraction layer, and we believe that dense nanohybrid networks have the potential to replace expensive and material scarce inorganic transparent electrodes in large area electronics toward the realization of low-cost flexible electronics.

A novel, scalable, solution-based method suitable for the control of ZnO crystal morphology at moderate temperature from rods/stars to rose-shaped, flowerlike structures is presented here. The synthesized ZnO roselike crystals are composed by wide nanosheets folded several times on themselves. This study represents the first step toward the full understanding of the growth mechanism that led to the formation of such a structure. It is now widely acknowledged that both size and shape of the metal oxide crystals have a profound effect on their properties. The influence that two morphology directing agents, ammonia and citric acid trisodium salt dihydrate, have on the shape-controlled synthesis is illustrated. The analysis of various possible mechanisms and forces that might contribute to the roselike crystals formation, such as the influence of polar surfaces, is discussed. The chemical composition and work function of the ZnO roses is investigated via XPS and UPS. XRD analysis suggests wurtzite as the most...

cited By 32; International audience; The atomic and electronic structure of a twisted and collapsed double-walled carbon nanotube was characterized using scanning tunneling microscopy and spectroscopy. It was found that the deformation opens an electronic band gap in an otherwise metallic nanotube, which has major ramifications on the use of carbon nanotubes for electronic applications. Fundamentally, the importance of the intershell interaction in this double-walled carbon nanotube points to the potential of a reversible metal-semiconductor junction, which can have device applications, as well as a caution in the design of semiconductor components based on carbon nanotubes. Lattice registry effects between the two neighboring walls evidenced by atomically resolved images confirm earlier first principle calculations indicating that the helicity influences the collapsed structure and show excellent agreement with the predicted twisted-collapse mode.

We present for the first time an in-depth study of the RF response of a single-walled carbon nanotube (SWCNT) rope. Our novel electrode design, based on a tapered coplanar approach, allows for single tube measurements well into the GHz regime, minimizing substrate-related parasitics. From the analysis of the S-parameters, the ac transport mechanism in the range 30 kHz to 6 GHz is established. This work is an essential prerequisite for the fabrication of high-speed devices based on bundles of nanowires or low-dimensional structures.