Search

In this work, we demonstrate how to suppress the shape instability of silver (Ag) nanotriangular pyramids following high-temperature annealing without a coating or encapsulation, thus producing a more stable optical plasmonic system. Nanosphere lithography (NSL) was used to fabricate large-area arrays of nanotriangular pyramids of Ag on glass substrates. By using a combination of morphology and spectroscopic studies it was found that exposure of this system to high temperatures of 473 K and beyond in air led to a rapid change in nanostructure shape, and thus, the surface area, with a substantial change to the original plasmonic character. On the other hand, NSL nanotriangular pyramids made from bilayers of Ag on Co or Co on Ag showed much smaller changes in shape and area following annealing up to 573 K in air. In the case of pure Ag, the NSL nanotriangular pyramid changed into a more spherical shape with an overall decrease of ∼24% in its surface area following annealing at 573 K. This lead to a large blue shift of over ∼287 nm or ∼39% in the location of the dipolar plasmonic resonance. On the other hand, the triangular shape of Ag was retained in both the metal bilayer cases, with much smaller area changes of ∼10 and ∼9%, for the Ag deposit when on Co and when under Co, respectively. Consequently, the plasmonic shifts were substantially smaller, of ∼65 nm or about 9%, in these bilayer systems. The mechanism for this stabilization was attributed to the higher surface energy of Co and much lower diffusivity of Co as well as Ag on Co that resulted in an anchoring of the Ag shape to its original state. The plasmonic quality factor for the bimetal NSL nanotriangular pyramids also showed substantially improved stability over pure Ag, further indicating that this anchoring approach is a viable pathway to produce pristine Ag surfaces for high-temperature plasmonic applications.

Plasmonic metal nanostructures have been known to tune optoelectronic properties of fluorophores. Here, we report the first-ever experimental observation of plasmon-induced photocurrent enhancements from Photosystem I (PSI) immobilized on Fischer patterns of silver nanopyramids (Ag-NP). To this end, the plasmonic peaks of Ag-NP were tuned to match the PSI absorption peaks at ∼450 and ∼680 nm wavelengths. Specifically, the plasmon-enhanced photocurrents indicate enhancement factors of ∼6.5 and ∼5.8 as compared to PSI assembly on planar Ag substrates for nominal excitation wavelengths of 660 and 470 nm, respectively. The comparable enhancement factors from both 470 and 660 nm excitations, in spite of a significantly weaker plasmon absorption peak at ∼450 nm for the Ag-NP structures, can be rationalized by previously reported excessive plasmon-induced fluorescence emission losses from PSI in the red region as compared to the blue region of the excitation wavelengths.

Techniques that can characterize the early stages of thin film deposition from liquid phase processes can aid greatly in our understanding of mechanistic aspects of chemical bath deposition (CBD). Here we have used localized surface plasmon resonance (LSPR) spectroscopy to monitor the in situ kinetics of early stage growth of cadmium sulfide (CdS) thin films on Ag nanoparticle on quartz substrates. Real-time shift during CdS deposition showed that the LSPR wavelength red-shifted rapidly due to random deposition of CdS on the substrate but saturated at longer times. LSPR modeling showed that these features could be interpreted as an initial deposition of CdS islands followed by preferential deposition onto itself. The CdS also showed significantly enhanced Raman signals up to 170 times due to surface-enhanced Raman scattering (SERS) from the CdS/Ag NP regions. The ex situ SERS effect supported the LSPR shift, suggesting that these techniques could be used to understand nucleation and growth phenomena from ...

Interaction of photons with matter at length scales far below their wavelengths has given rise to many novel phenomena, including localized surface plasmon resonance (LSPR). However, LSPR with narrow bandwidth (BW) is observed only in a select few noble metals, and ferromagnets are not among them. Here, we report the discovery of LSPR in ferromagnetic Co and CoFe alloy (8% Fe) in contact with Ag in the form of bimetallic nanoparticles prepared by pulsed laser dewetting. These plasmons in metal-ferromagnetic nanostructures, or ferroplasmons (FP) for short, are in the visible spectrum with comparable intensity and BW to those of the LSPRs from the Ag regions. This finding was enabled by electron energy-loss mapping across individual nanoparticles in a monochromated scanning transmission electron microscope. The appearance of the FP is likely due to plasmonic interaction between the contacting Ag and Co nanoparticles. Since there is no previous evidence for materials that simultaneously show ferromagnetism and such intense LSPRs, this discovery may lead to the design of improved plasmonic materials and applications. It also demonstrates that materials with interesting plasmonic properties can be synthesized using bimetallic nanostructures in contact with each other.